An Introduction to ANSYS Fluent 2019

An Introduction to ANSYS Fluent 2019 PDF Author: John Matsson
Publisher: SDC Publications
ISBN: 1630573302
Category : Computers
Languages : en
Pages : 457

Get Book Here

Book Description
• Teaches new users how to run Computational Fluid Dynamics simulations using ANSYS Fluent • Uses applied problems, with detailed step-by-step instructions • Designed to supplement undergraduate and graduate courses • Covers the use of ANSYS Workbench, ANSYS DesignModeler, ANSYS Meshing and ANSYS Fluent • Compares results from ANSYS Fluent with numerical solutions using Mathematica As an engineer, you may need to test how a design interacts with fluids. For example, you may need to simulate how air flows over an aircraft wing, how water flows through a filter, or how water seeps under a dam. Carrying out simulations is often a critical step in verifying that a design will be successful. In this hands-on book, you’ll learn in detail how to run Computational Fluid Dynamics (CFD) simulations using ANSYS Fluent. ANSYS Fluent is known for its power, simplicity and speed, which has helped make it a world leader in CFD software, both in academia and industry. Unlike any other ANSYS Fluent textbook currently on the market, this book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. You will also learn how to visualize the computed flows in the post-processing phase using different types of plots. To better understand the mathematical models being applied, we’ll validate the results from ANSYS Fluent with numerical solutions calculated using Mathematica. Throughout this book we’ll learn how to create geometry using ANSYS Workbench and ANSYS DesignModeler, how to create mesh using ANSYS Meshing, how to use physical models and how to perform calculations using ANSYS Fluent. The twenty chapters in this book can be used in any order and are suitable for beginners with little or no previous experience using ANSYS. Intermediate users, already familiar with the basics of ANSYS Fluent, will still find new areas to explore and learn. An Introduction to ANSYS Fluent 2019 is designed to be used as a supplement to undergraduate courses in Aerodynamics, Finite Element Methods and Fluid Mechanics and is suitable for graduate level courses such as Viscous Fluid Flows and Hydrodynamic Stability. The use of CFD simulation software is rapidly growing in all industries. Companies are now expecting graduating engineers to have knowledge of how to perform simulations. Even if you don’t eventually complete simulations yourself, understanding the process used to complete these simulations is necessary to be an effective team member. People with experience using ANSYS Fluent are highly sought after in the industry, so learning this software will not only give you an advantage in your classes, but also when applying for jobs and in the workplace. This book is a valuable tool that will help you master ANSYS Fluent and better understand the underlying theory.

An Introduction to ANSYS Fluent 2019

An Introduction to ANSYS Fluent 2019 PDF Author: John Matsson
Publisher: SDC Publications
ISBN: 1630573302
Category : Computers
Languages : en
Pages : 457

Get Book Here

Book Description
• Teaches new users how to run Computational Fluid Dynamics simulations using ANSYS Fluent • Uses applied problems, with detailed step-by-step instructions • Designed to supplement undergraduate and graduate courses • Covers the use of ANSYS Workbench, ANSYS DesignModeler, ANSYS Meshing and ANSYS Fluent • Compares results from ANSYS Fluent with numerical solutions using Mathematica As an engineer, you may need to test how a design interacts with fluids. For example, you may need to simulate how air flows over an aircraft wing, how water flows through a filter, or how water seeps under a dam. Carrying out simulations is often a critical step in verifying that a design will be successful. In this hands-on book, you’ll learn in detail how to run Computational Fluid Dynamics (CFD) simulations using ANSYS Fluent. ANSYS Fluent is known for its power, simplicity and speed, which has helped make it a world leader in CFD software, both in academia and industry. Unlike any other ANSYS Fluent textbook currently on the market, this book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. You will also learn how to visualize the computed flows in the post-processing phase using different types of plots. To better understand the mathematical models being applied, we’ll validate the results from ANSYS Fluent with numerical solutions calculated using Mathematica. Throughout this book we’ll learn how to create geometry using ANSYS Workbench and ANSYS DesignModeler, how to create mesh using ANSYS Meshing, how to use physical models and how to perform calculations using ANSYS Fluent. The twenty chapters in this book can be used in any order and are suitable for beginners with little or no previous experience using ANSYS. Intermediate users, already familiar with the basics of ANSYS Fluent, will still find new areas to explore and learn. An Introduction to ANSYS Fluent 2019 is designed to be used as a supplement to undergraduate courses in Aerodynamics, Finite Element Methods and Fluid Mechanics and is suitable for graduate level courses such as Viscous Fluid Flows and Hydrodynamic Stability. The use of CFD simulation software is rapidly growing in all industries. Companies are now expecting graduating engineers to have knowledge of how to perform simulations. Even if you don’t eventually complete simulations yourself, understanding the process used to complete these simulations is necessary to be an effective team member. People with experience using ANSYS Fluent are highly sought after in the industry, so learning this software will not only give you an advantage in your classes, but also when applying for jobs and in the workplace. This book is a valuable tool that will help you master ANSYS Fluent and better understand the underlying theory.

An Introduction to ANSYS Fluent 2021

An Introduction to ANSYS Fluent 2021 PDF Author: John E. Matsson
Publisher: SDC Publications
ISBN: 1630574627
Category : Computers
Languages : en
Pages : 555

Get Book Here

Book Description
As an engineer, you may need to test how a design interacts with fluids. For example, you may need to simulate how air flows over an aircraft wing, how water flows through a filter, or how water seeps under a dam. Carrying out simulations is often a critical step in verifying that a design will be successful. In this hands-on book, you’ll learn in detail how to run Computational Fluid Dynamics (CFD) simulations using ANSYS Fluent. ANSYS Fluent is known for its power, simplicity and speed, which has helped make it a world leader in CFD software, both in academia and industry. Unlike any other ANSYS Fluent textbook currently on the market, this book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. You will also learn how to visualize the computed flows in the post-processing phase using different types of plots. To better understand the mathematical models being applied, we’ll validate the results from ANSYS Fluent with numerical solutions calculated using Mathematica. Throughout this book we’ll learn how to create geometry using ANSYS Workbench and ANSYS DesignModeler, how to create mesh using ANSYS Meshing, how to use physical models and how to perform calculations using ANSYS Fluent. The chapters in this book can be used in any order and are suitable for beginners with little or no previous experience using ANSYS. Intermediate users, already familiar with the basics of ANSYS Fluent, will still find new areas to explore and learn. An Introduction to ANSYS Fluent 2021 is designed to be used as a supplement to undergraduate courses in Aerodynamics, Finite Element Methods and Fluid Mechanics and is suitable for graduate level courses such as Viscous Fluid Flows and Hydrodynamic Stability. The use of CFD simulation software is rapidly growing in all industries. Companies are now expecting graduating engineers to have knowledge of how to perform simulations. Even if you don’t eventually complete simulations yourself, understanding the process used to complete these simulations is necessary to be an effective team member. People with experience using ANSYS Fluent are highly sought after in the industry, so learning this software will not only give you an advantage in your classes, but also when applying for jobs and in the workplace. This book is a valuable tool that will help you master ANSYS Fluent and better understand the underlying theory. Topics Covered • Boundary Conditions • Drag and Lift • Initialization • Iterations • Laminar and Turbulent Flows • Mesh • Multiphase Flows • Nodes and Elements • Pressure • Project Schematic • Results • Sketch • Solution • Solver • Streamlines • Transient • Visualizations • XY Plot Table of Contents 1. Introduction 2. Flat Plate Boundary Layer 3. Flow Past a Cylinder 4. Flow Past an Airfoil 5. Rayleigh-Benard Convection 6. Channel Flow 7. Rotating Flow in a Cavity 8. Spinning Cylinder 9. Kelvin-Helmholtz Instability 10. Rayleigh-Taylor Instability 11. Flow Under a Dam 12. Water Filter Flow 13. Model Rocket Flow 14. Ahmed Body 15. Hourglass 16. Bouncing Spheres 17. Falling Sphere 18. Flow Past a Sphere 19. Taylor-Couette Flow 20. Dean Flow in a Curved Channel 21. Rotating Channel Flow 22. Compressible Flow Past a Bullet 23. Vertical Axis Wind Turbine Flow 24. Circular Hydraulic Jump

An Introduction to ANSYS Fluent 2020

An Introduction to ANSYS Fluent 2020 PDF Author: John Matsson
Publisher: SDC Publications
ISBN: 1630573965
Category : Computers
Languages : en
Pages : 525

Get Book Here

Book Description
As an engineer, you may need to test how a design interacts with fluids. For example, you may need to simulate how air flows over an aircraft wing, how water flows through a filter, or how water seeps under a dam. Carrying out simulations is often a critical step in verifying that a design will be successful. In this hands-on book, you’ll learn in detail how to run Computational Fluid Dynamics (CFD) simulations using ANSYS Fluent. ANSYS Fluent is known for its power, simplicity and speed, which has helped make it a world leader in CFD software, both in academia and industry. Unlike any other ANSYS Fluent textbook currently on the market, this book uses applied problems to walk you step-by-step through completing CFD simulations for many common flow cases, including internal and external flows, laminar and turbulent flows, steady and unsteady flows, and single-phase and multiphase flows. You will also learn how to visualize the computed flows in the post-processing phase using different types of plots. To better understand the mathematical models being applied, we’ll validate the results from ANSYS Fluent with numerical solutions calculated using Mathematica. Throughout this book we’ll learn how to create geometry using ANSYS Workbench and ANSYS DesignModeler, how to create mesh using ANSYS Meshing, how to use physical models and how to perform calculations using ANSYS Fluent. The twenty chapters in this book can be used in any order and are suitable for beginners with little or no previous experience using ANSYS. Intermediate users, already familiar with the basics of ANSYS Fluent, will still find new areas to explore and learn. An Introduction to ANSYS Fluent 2020 is designed to be used as a supplement to undergraduate courses in Aerodynamics, Finite Element Methods and Fluid Mechanics and is suitable for graduate level courses such as Viscous Fluid Flows and Hydrodynamic Stability. The use of CFD simulation software is rapidly growing in all industries. Companies are now expecting graduating engineers to have knowledge of how to perform simulations. Even if you don’t eventually complete simulations yourself, understanding the process used to complete these simulations is necessary to be an effective team member. People with experience using ANSYS Fluent are highly sought after in the industry, so learning this software will not only give you an advantage in your classes, but also when applying for jobs and in the workplace. This book is a valuable tool that will help you master ANSYS Fluent and better understand the underlying theory.

Finite Element Simulations with ANSYS Workbench 2020

Finite Element Simulations with ANSYS Workbench 2020 PDF Author: Huei-Huang Lee
Publisher: SDC Publications
ISBN: 1630574015
Category : Computers
Languages : en
Pages : 621

Get Book Here

Book Description
Finite Element Simulations with ANSYS Workbench 2020 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available. Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences is utilized though this entire book. A typical chapter consists of six sections. The first two provide two step-by-step examples. The third section tries to complement the exercises by providing a more systematic view of the chapter subject. The following two sections provide more exercises. The final section provides review problems. Who this book is for This book is designed to be used mainly as a textbook for undergraduate and graduate students. It will work well in: • a finite element simulation course taken before any theory-intensive courses • an auxiliary tool used as a tutorial in parallel during a Finite Element Methods course • an advanced, application oriented, course taken after a Finite Element Methods course

Finite Element Simulations with ANSYS Workbench 2019

Finite Element Simulations with ANSYS Workbench 2019 PDF Author: Huei-Huang Lee
Publisher: SDC Publications
ISBN: 1630572993
Category : Computers
Languages : en
Pages : 617

Get Book Here

Book Description
Finite Element Simulations with ANSYS Workbench 2019 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available. Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences is utilized though this entire book. A typical chapter consists of six sections. The first two provide two step-by-step examples. The third section tries to complement the exercises by providing a more systematic view of the chapter subject. The following two sections provide more exercises. The final section provides review problems. Who this book is for This book is designed to be used mainly as a textbook for undergraduate and graduate students. It will work well in: a finite element simulation course taken before any theory-intensive courses an auxiliary tool used as a tutorial in parallel during a Finite Element Methods course an advanced, application oriented, course taken after a Finite Element Methods course About the Videos Each copy of this book includes access to video instruction. In these videos the author provides a clear presentation of tutorials found in the book. The videos reinforce the steps described in the book by allowing you to watch the exact steps the author uses to complete the exercises.

Engineering Analysis with ANSYS Software

Engineering Analysis with ANSYS Software PDF Author: Tadeusz Stolarski
Publisher: Butterworth-Heinemann
ISBN: 0081021658
Category : Technology & Engineering
Languages : en
Pages : 564

Get Book Here

Book Description
Engineering Analysis with ANSYS Software, Second Edition, provides a comprehensive introduction to fundamental areas of engineering analysis needed for research or commercial engineering projects. The book introduces the principles of the finite element method, presents an overview of ANSYS technologies, then covers key application areas in detail. This new edition updates the latest version of ANSYS, describes how to use FLUENT for CFD FEA, and includes more worked examples. With detailed step-by-step explanations and sample problems, this book develops the reader's understanding of FEA and their ability to use ANSYS software tools to solve a range of analysis problems. - Uses detailed and clear step-by-step instructions, worked examples and screen-by-screen illustrative problems to reinforce learning - Updates the latest version of ANSYS, using FLUENT instead of FLOWTRAN - Includes instructions for use of WORKBENCH - Features additional worked examples to show engineering analysis in a broader range of practical engineering applications

Applied Computational Fluid Dynamics and Turbulence Modeling

Applied Computational Fluid Dynamics and Turbulence Modeling PDF Author: Sal Rodriguez
Publisher: Springer Nature
ISBN: 3030286916
Category : Computers
Languages : en
Pages : 316

Get Book Here

Book Description
This unique text provides engineering students and practicing professionals with a comprehensive set of practical, hands-on guidelines and dozens of step-by-step examples for performing state-of-the-art, reliable computational fluid dynamics (CFD) and turbulence modeling. Key CFD and turbulence programs are included as well. The text first reviews basic CFD theory, and then details advanced applied theories for estimating turbulence, including new algorithms created by the author. The book gives practical advice on selecting appropriate turbulence models and presents best CFD practices for modeling and generating reliable simulations. The author gathered and developed the book’s hundreds of tips, tricks, and examples over three decades of research and development at three national laboratories and at the University of New Mexico—many in print for the first time in this book. The book also places a strong emphasis on recent CFD and turbulence advancements found in the literature over the past five to 10 years. Readers can apply the author’s advice and insights whether using commercial or national laboratory software such as ANSYS Fluent, STAR-CCM, COMSOL, Flownex, SimScale, OpenFOAM, Fuego, KIVA, BIGHORN, or their own computational tools. Applied Computational Fluid Dynamics and Turbulence Modeling is a practical, complementary companion for academic CFD textbooks and senior project courses in mechanical, civil, chemical, and nuclear engineering; senior undergraduate and graduate CFD and turbulence modeling courses; and for professionals developing commercial and research applications.

Finite Element Simulations with ANSYS Workbench 2021

Finite Element Simulations with ANSYS Workbench 2021 PDF Author: Huei-Huang Lee
Publisher: SDC Publications
ISBN: 1630574562
Category : Computers
Languages : en
Pages : 617

Get Book Here

Book Description
• A comprehensive easy to understand workbook using step-by-step instructions • Designed as a textbook for undergraduate and graduate students • Relevant background knowledge is reviewed whenever necessary • Twenty seven real world case studies are used to give readers hands-on experience • Comes with video demonstrations of all 45 exercises • Compatible with ANSYS Student 2021 • Printed in full color Finite Element Simulations with ANSYS Workbench 2021 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available. Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences is utilized though this entire book. A typical chapter consists of six sections. The first two provide two step-by-step examples. The third section tries to complement the exercises by providing a more systematic view of the chapter subject. The following two sections provide more exercises. The final section provides review problems. Who this book is for This book is designed to be used mainly as a textbook for undergraduate and graduate students. It will work well in: • a finite element simulation course taken before any theory-intensive courses • an auxiliary tool used as a tutorial in parallel during a Finite Element Methods course • an advanced, application oriented, course taken after a Finite Element Methods course About the Videos Each copy of this book includes access to video instruction. In these videos the author provides a clear presentation of tutorials found in the book. The videos reinforce the steps described in the book by allowing you to watch the exact steps the author uses to complete the exercises. Table of Contents 1. Introduction 2. Sketching 3. 2D Simulations 4. 3D Solid Modeling 5. 3D Simulations 6. Surface Models 7. Line Models 8. Optimization 9. Meshing 10. Buckling and Stress Stiffening 11. Modal Analysis 12. Transient Structural Simulations 13. Nonlinear Simulations 14. Nonlinear Materials 15. Explicit Dynamics Index

Introduction to Software for Chemical Engineers, Second Edition

Introduction to Software for Chemical Engineers, Second Edition PDF Author: Mariano Martín Martín
Publisher: CRC Press
ISBN: 0429835426
Category : Computers
Languages : en
Pages : 959

Get Book Here

Book Description
The field of Chemical Engineering and its link to computer science is in constant evolution and new engineers have a variety of tools at their disposal to tackle their everyday problems. Introduction to Software for Chemical Engineers, Second Edition provides a quick guide to the use of various computer packages for chemical engineering applications. It covers a range of software applications from Excel and general mathematical packages such as MATLAB and MathCAD to process simulators, CHEMCAD and ASPEN, equation-based modeling languages, gProms, optimization software such as GAMS and AIMS, and specialized software like CFD or DEM codes. The different packages are introduced and applied to solve typical problems in fluid mechanics, heat and mass transfer, mass and energy balances, unit operations, reactor engineering, process and equipment design and control. This new edition offers a wider view of packages including open source software such as R, Python and Julia. It also includes complete examples in ASPEN Plus, adds ANSYS Fluent to CFD codes, Lingo to the optimization packages, and discusses Engineering Equation Solver. It offers a global idea of the capabilities of the software used in the chemical engineering field and provides examples for solving real-world problems. Written by leading experts, this book is a must-have reference for chemical engineers looking to grow in their careers through the use of new and improving computer software. Its user-friendly approach to simulation and optimization as well as its example-based presentation of the software, makes it a perfect teaching tool for both undergraduate and master levels.

Fox and McDonald's Introduction to Fluid Mechanics

Fox and McDonald's Introduction to Fluid Mechanics PDF Author: Robert W. Fox
Publisher: John Wiley & Sons
ISBN: 1119721024
Category : Science
Languages : en
Pages : 610

Get Book Here

Book Description
Through ten editions, Fox and McDonald's Introduction to Fluid Mechanics has helped students understand the physical concepts, basic principles, and analysis methods of fluid mechanics. This market-leading textbook provides a balanced, systematic approach to mastering critical concepts with the proven Fox-McDonald solution methodology. In-depth yet accessible chapters present governing equations, clearly state assumptions, and relate mathematical results to corresponding physical behavior. Emphasis is placed on the use of control volumes to support a practical, theoretically-inclusive problem-solving approach to the subject. Each comprehensive chapter includes numerous, easy-to-follow examples that illustrate good solution technique and explain challenging points. A broad range of carefully selected topics describe how to apply the governing equations to various problems, and explain physical concepts to enable students to model real-world fluid flow situations. Topics include flow measurement, dimensional analysis and similitude, flow in pipes, ducts, and open channels, fluid machinery, and more. To enhance student learning, the book incorporates numerous pedagogical features including chapter summaries and learning objectives, end-of-chapter problems, useful equations, and design and open-ended problems that encourage students to apply fluid mechanics principles to the design of devices and systems.