Author: Frank Pobell
Publisher: Springer Science & Business Media
ISBN: 366208578X
Category : Science
Languages : en
Pages : 328
Book Description
The aim of this book is to provide information about performing experi ments at low temperatures, as well as basic facts concerning the low tem perature properties of liquid and solid matter. To orient the reader, I begin with chapters on these low temperature properties. The major part of the book is then devoted to refrigeration techniques and to the physics on which they are based. Of equal importance, of course, are the definition and measurement of temperature; hence low temperature thermometry is extensively discussed in subsequent chapters. Finally, I describe a variety of design and construction techniques which have turned out to be useful over the years. The content of the book is based on the three-hour-per-week lecture course which I have given several times at the University of Bayreuth between 1983 and 1991. It should be particularly suited for advanced stu dents whose intended masters (diploma) or Ph.D. subject is experimental condensed matter physics at low temperatures. However, I believe that the book will also be of value to experienced scientists, since it describes sev eral very recent advances in experimental low temperature physics and technology, for example, new developments in nuclear refrigeration and thermometry.
Matter and Methods at Low Temperatures
Author: Frank Pobell
Publisher: Springer Science & Business Media
ISBN: 366208578X
Category : Science
Languages : en
Pages : 328
Book Description
The aim of this book is to provide information about performing experi ments at low temperatures, as well as basic facts concerning the low tem perature properties of liquid and solid matter. To orient the reader, I begin with chapters on these low temperature properties. The major part of the book is then devoted to refrigeration techniques and to the physics on which they are based. Of equal importance, of course, are the definition and measurement of temperature; hence low temperature thermometry is extensively discussed in subsequent chapters. Finally, I describe a variety of design and construction techniques which have turned out to be useful over the years. The content of the book is based on the three-hour-per-week lecture course which I have given several times at the University of Bayreuth between 1983 and 1991. It should be particularly suited for advanced stu dents whose intended masters (diploma) or Ph.D. subject is experimental condensed matter physics at low temperatures. However, I believe that the book will also be of value to experienced scientists, since it describes sev eral very recent advances in experimental low temperature physics and technology, for example, new developments in nuclear refrigeration and thermometry.
Publisher: Springer Science & Business Media
ISBN: 366208578X
Category : Science
Languages : en
Pages : 328
Book Description
The aim of this book is to provide information about performing experi ments at low temperatures, as well as basic facts concerning the low tem perature properties of liquid and solid matter. To orient the reader, I begin with chapters on these low temperature properties. The major part of the book is then devoted to refrigeration techniques and to the physics on which they are based. Of equal importance, of course, are the definition and measurement of temperature; hence low temperature thermometry is extensively discussed in subsequent chapters. Finally, I describe a variety of design and construction techniques which have turned out to be useful over the years. The content of the book is based on the three-hour-per-week lecture course which I have given several times at the University of Bayreuth between 1983 and 1991. It should be particularly suited for advanced stu dents whose intended masters (diploma) or Ph.D. subject is experimental condensed matter physics at low temperatures. However, I believe that the book will also be of value to experienced scientists, since it describes sev eral very recent advances in experimental low temperature physics and technology, for example, new developments in nuclear refrigeration and thermometry.
Matter and Methods at Low Temperatures
Author: Frank Pobell
Publisher: Springer Science & Business Media
ISBN: 3662032252
Category : Science
Languages : en
Pages : 383
Book Description
This textbook contains information essential for successful experiments at low temperatures. The first chapters describe the low-temperature properties of liquids and solid matter, including liquid helium. Most of the book is devoted to refrigeration techniques and the physics on which they rely, the definition of temperature, thermometry, and a variety of design and construction techniques. The lively and practical style make it easy to read and particularly useful to anyone beginning research in low-temperature physics. Low-temperature scientists will find it of great value due to its extensive compilation of materials data and relevant new results.
Publisher: Springer Science & Business Media
ISBN: 3662032252
Category : Science
Languages : en
Pages : 383
Book Description
This textbook contains information essential for successful experiments at low temperatures. The first chapters describe the low-temperature properties of liquids and solid matter, including liquid helium. Most of the book is devoted to refrigeration techniques and the physics on which they rely, the definition of temperature, thermometry, and a variety of design and construction techniques. The lively and practical style make it easy to read and particularly useful to anyone beginning research in low-temperature physics. Low-temperature scientists will find it of great value due to its extensive compilation of materials data and relevant new results.
Experimental Techniques In Condensed Matter Physics At Low Temperatures
Author: Robert C. Richardson
Publisher: CRC Press
ISBN: 0429973489
Category : Science
Languages : en
Pages : 276
Book Description
This practical book provides recipes for the construction of devices used in low temperature experimentation. It emphasizes what works, rather than what might be the optimum method, and lists current sources for purchasing components and equipment.
Publisher: CRC Press
ISBN: 0429973489
Category : Science
Languages : en
Pages : 276
Book Description
This practical book provides recipes for the construction of devices used in low temperature experimentation. It emphasizes what works, rather than what might be the optimum method, and lists current sources for purchasing components and equipment.
Experimental Low Temperature Physics
Author: T. Kent
Publisher: Springer Science & Business Media
ISBN: 9781563960307
Category : Science
Languages : en
Pages : 228
Book Description
Market: Graduate students in condensed matter and atomic and molecular physics. This engagingly written book introduces the field and provides important information for those making low temperature measurements. Fundamental thermodynamic considerations are covered at the start and the book concludes with commercial applications and an appendix on laser cooling.
Publisher: Springer Science & Business Media
ISBN: 9781563960307
Category : Science
Languages : en
Pages : 228
Book Description
Market: Graduate students in condensed matter and atomic and molecular physics. This engagingly written book introduces the field and provides important information for those making low temperature measurements. Fundamental thermodynamic considerations are covered at the start and the book concludes with commercial applications and an appendix on laser cooling.
Experimental Techniques for Low-Temperature Measurements
Author: Jack Ekin
Publisher: Oxford University Press
ISBN: 0198570546
Category : Science
Languages : en
Pages : 704
Book Description
Publisher description
Publisher: Oxford University Press
ISBN: 0198570546
Category : Science
Languages : en
Pages : 704
Book Description
Publisher description
Low Temperatures and Cold Molecules
Author: Ian W. M. Smith
Publisher: Imperial College Press
ISBN: 1848162103
Category : Science
Languages : en
Pages : 578
Book Description
This book brings together, for the first time, the results of recent research in areas ranging from the chemistry of cold interstellar clouds (10-20 K), through laboratory studies of the spectroscopy and kinetics of ions, radicals and molecules, to studies of molecules in liquid helium droplets, to attempts to create molecular (as distinct from atomic) Bose-Einstein condensates.
Publisher: Imperial College Press
ISBN: 1848162103
Category : Science
Languages : en
Pages : 578
Book Description
This book brings together, for the first time, the results of recent research in areas ranging from the chemistry of cold interstellar clouds (10-20 K), through laboratory studies of the spectroscopy and kinetics of ions, radicals and molecules, to studies of molecules in liquid helium droplets, to attempts to create molecular (as distinct from atomic) Bose-Einstein condensates.
Mechanical Properties of Materials at Low Temperatures
Author: D. Wigley
Publisher: Springer Science & Business Media
ISBN: 1468418874
Category : Science
Languages : en
Pages : 338
Book Description
In writing this monograph, the aim has been to consider the mechanical properties of the wide range of materials now available in such a way as to start with the fundamental nature of these properties and to follow the discussion through to the point at which the reader is able to comprehend the significance or otherwise of the large amounts of data now available in design manuals and other compilations. In short, it is hoped that this volume will be used as a companion to these data compilations and as an aid to their interpretation. In attempting to cover such a wide field, a large degree of selection has been necessary, as complete volumes have been written on topics which here have had to be covered in a few pages or less. It is inevitable that not everyone will agree with the choice made, especially if it is his own subject which has been discussed rather briefly, and the author accepts full res ponsibility for the selection made. The book is written at a level which should be easily followed by a university graduate in science or engineer ing, although, if his background has not included a course in materials science, some groundwork may be lacking.
Publisher: Springer Science & Business Media
ISBN: 1468418874
Category : Science
Languages : en
Pages : 338
Book Description
In writing this monograph, the aim has been to consider the mechanical properties of the wide range of materials now available in such a way as to start with the fundamental nature of these properties and to follow the discussion through to the point at which the reader is able to comprehend the significance or otherwise of the large amounts of data now available in design manuals and other compilations. In short, it is hoped that this volume will be used as a companion to these data compilations and as an aid to their interpretation. In attempting to cover such a wide field, a large degree of selection has been necessary, as complete volumes have been written on topics which here have had to be covered in a few pages or less. It is inevitable that not everyone will agree with the choice made, especially if it is his own subject which has been discussed rather briefly, and the author accepts full res ponsibility for the selection made. The book is written at a level which should be easily followed by a university graduate in science or engineer ing, although, if his background has not included a course in materials science, some groundwork may be lacking.
Heat Capacity and Thermal Expansion at Low Temperatures
Author: T.H.K. Barron
Publisher: Springer Science & Business Media
ISBN: 1461546958
Category : Science
Languages : en
Pages : 342
Book Description
The birth of this monograph is partly due to the persistent efforts of the General Editor, Dr. Klaus Timmerhaus, to persuade the authors that they encapsulate their forty or fifty years of struggle with the thermal properties of materials into a book before they either expired or became totally senile. We recognize his wisdom in wanting a monograph which includes the closely linked properties of heat capacity and thermal expansion, to which we have added a little 'cement' in the form of elastic moduli. There seems to be a dearth of practitioners in these areas, particularly among physics postgraduate students, sometimes temporarily alleviated when a new generation of exciting materials are found, be they heavy fermion compounds, high temperature superconductors, or fullerenes. And yet the needs of the space industry, telecommunications, energy conservation, astronomy, medical imaging, etc. , place demands for more data and understanding of these properties for all classes of materials - metals, polymers, glasses, ceramics, and mixtures thereof. There have been many useful books, including Specific Heats at Low Tempera tures by E. S. Raja Gopal (1966) in this Plenum Cryogenic Monograph Series, but few if any that covered these related topics in one book in a fashion designed to help the cryogenic engineer and cryophysicist. We hope that the introductory chapter will widen the horizons of many without a solid state background but with a general interest in physics and materials.
Publisher: Springer Science & Business Media
ISBN: 1461546958
Category : Science
Languages : en
Pages : 342
Book Description
The birth of this monograph is partly due to the persistent efforts of the General Editor, Dr. Klaus Timmerhaus, to persuade the authors that they encapsulate their forty or fifty years of struggle with the thermal properties of materials into a book before they either expired or became totally senile. We recognize his wisdom in wanting a monograph which includes the closely linked properties of heat capacity and thermal expansion, to which we have added a little 'cement' in the form of elastic moduli. There seems to be a dearth of practitioners in these areas, particularly among physics postgraduate students, sometimes temporarily alleviated when a new generation of exciting materials are found, be they heavy fermion compounds, high temperature superconductors, or fullerenes. And yet the needs of the space industry, telecommunications, energy conservation, astronomy, medical imaging, etc. , place demands for more data and understanding of these properties for all classes of materials - metals, polymers, glasses, ceramics, and mixtures thereof. There have been many useful books, including Specific Heats at Low Tempera tures by E. S. Raja Gopal (1966) in this Plenum Cryogenic Monograph Series, but few if any that covered these related topics in one book in a fashion designed to help the cryogenic engineer and cryophysicist. We hope that the introductory chapter will widen the horizons of many without a solid state background but with a general interest in physics and materials.
Low Temperature Materials and Mechanisms
Author: Yoseph Bar-Cohen
Publisher: CRC Press
ISBN: 149870039X
Category : Science
Languages : en
Pages : 518
Book Description
This book addresses the growing interest in low temperature technologies. Since the subject of low temperature materials and mechanisms is multidisciplinary, the chapters reflect the broadest possible perspective of the field. Leading experts in the specific subject area address the various related science and engineering chemistry, material science, electrical engineering, mechanical engineering, metallurgy, and physics.
Publisher: CRC Press
ISBN: 149870039X
Category : Science
Languages : en
Pages : 518
Book Description
This book addresses the growing interest in low temperature technologies. Since the subject of low temperature materials and mechanisms is multidisciplinary, the chapters reflect the broadest possible perspective of the field. Leading experts in the specific subject area address the various related science and engineering chemistry, material science, electrical engineering, mechanical engineering, metallurgy, and physics.
Austenitic Steels at Low Temperatures
Author: T. Horiuchi
Publisher: Springer Science & Business Media
ISBN: 1461337305
Category : Technology & Engineering
Languages : en
Pages : 384
Book Description
The need for alternate energy sources has led to the develop ment of prototype fusion and MHD reactors. Both possible energy systems in current designs usually require the use of magnetic fields for plasma confinement and concentration. For the creation and maintenance of large 5 to 15 tesla magnetic fields, supercon ducting magnets appear more economical. But the high magnetic fields create large forces, and the complexities of the conceptual reactors create severe space restrictions. The combination of re quirements, plus the desire to keep construction costs at a mini mum, has created a need for stronger structural alloys for service at liquid helium temperature (4 K). The complexity of the required structures requires that these alloys be weldable. Furthermore, since the plasma is influenced by magnetic fields and since magnet ic forces from the use of ferromagnetic materials in many configur ations may be additive, the best structural alloy for most applica tions should be nonmagnetic. These requirements have led to consideration of higher strength austenitic steels. Strength increases at low temperatures are achieved by the addition of nitrogen. The stability of the austenitic structure is retained by adding manganese instead of nickel, which is more expensive. Research to develop these higher strength austenitic steels is in process, primarily in Japan and the United States.
Publisher: Springer Science & Business Media
ISBN: 1461337305
Category : Technology & Engineering
Languages : en
Pages : 384
Book Description
The need for alternate energy sources has led to the develop ment of prototype fusion and MHD reactors. Both possible energy systems in current designs usually require the use of magnetic fields for plasma confinement and concentration. For the creation and maintenance of large 5 to 15 tesla magnetic fields, supercon ducting magnets appear more economical. But the high magnetic fields create large forces, and the complexities of the conceptual reactors create severe space restrictions. The combination of re quirements, plus the desire to keep construction costs at a mini mum, has created a need for stronger structural alloys for service at liquid helium temperature (4 K). The complexity of the required structures requires that these alloys be weldable. Furthermore, since the plasma is influenced by magnetic fields and since magnet ic forces from the use of ferromagnetic materials in many configur ations may be additive, the best structural alloy for most applica tions should be nonmagnetic. These requirements have led to consideration of higher strength austenitic steels. Strength increases at low temperatures are achieved by the addition of nitrogen. The stability of the austenitic structure is retained by adding manganese instead of nickel, which is more expensive. Research to develop these higher strength austenitic steels is in process, primarily in Japan and the United States.