Author: Gerald L. Ullman
Publisher:
ISBN: 9780309446754
Category : Road work zones
Languages : en
Pages : 68

Get Book Here

Book Description

Author: Henry Brown
Publisher:
ISBN:
Category : Road work zones
Languages : en
Pages : 136

Get Book Here

Book Description
The Highway Safety Manual (HSM) is the compilation of national safety research that provides quantitative methods for analyzing highway safety. The HSM presents crash modification functions related to freeway work zone characteristics such as work zone duration and length. These crash modification functions were based on freeway work zones with high traffic volumes in California. When the HSM-referenced model was calibrated for Missouri, the value was 3.78, which is not ideal since it is significantly larger than 1. Therefore, new models were developed in this study using Missouri data to capture geographical, driver behavior, and other factors in the Midwest. Also, new models for expressway and rural two-lane work zones that barely were studied in the literature were developed. A large sample of 20,837 freeway, 8,993 expressway, and 64,476 rural two-lane work zones in Missouri was analyzed to derive 15 work zone crash prediction models. The most appropriate samples of 1,546 freeway, 1,189 expressway, and 6,095 rural two-lane work zones longer than 0.1 mile and with a duration of greater than 10 days were used to make eight, four, and three models, respectively. A challenging question for practitioners is always how to use crash prediction models to make the best estimation of work zone crash count. To solve this problem, a user-friendly software tool was developed in a spreadsheet format to predict work zone crashes based on work zone characteristics. This software selects the best model, estimates the work zone crashes by severity, and converts them to monetary values using standard crash estimates. This study also included a survey of departments of transportation (DOTs), Federal Highway Administration (FHWA) representatives, and contractors to assess the current state of the practice regarding work zone safety. The survey results indicate that many agencies look at work zone safety informally using engineering judgment. Respondents indicated that they would like a tool that could help them to balance work zone safety across projects by looking at crashes and user costs.

Author: Erica Lee Swansen
Publisher:
ISBN:
Category : Road work zones
Languages : en
Pages : 137

Get Book Here

Book Description
Work zone crashes and fatalities have been decreasing since 1994. Yet, according to Fatality Analysis Reporting System, 667 people were killed in highway work zone crashes in 2009. As the United States' infrastructure ages and new roads and highways are constructed less frequently, the need for repairs and alterations to the nation's roadways is continually increasing. This growth ensures that work zones will be a vital piece of design focus in the near future. In order to continue the decreasing trend in work zone crashes, and reduce the still significant number of work zone fatalities, work zones need to continually be examined to identify opportunities for improved safety. This research explored the relationship between work zone related crashes and work zone design and setup. More specifically, existing literature and current standards, compiled with crash report form data in the UMass Safety Data Warehouse and field observations in Massachusetts were integrated to determine the causes and remedies for work zone related crashes. The research examined three critical areas: 1) causation of work zone related crashes in contrast to non-work zone related crashes along with variations of citations as a result of work zone crashes; 2) variations of the work zone definition and the impact on work zone involvement; and 3) analysis of conflict and event studies for small scale work zones to develop a methodology using surrogate measures to identify potential countermeasures leading to improved work zone safety. The results are expected to advance the current state of knowledge with regards to work zone design and setup, resulting in recommended actions for improved work zone analysis and design strategies.

Author: Jian John Lu
Publisher:
ISBN:
Category : CD-ROMs
Languages : en
Pages : 181

Get Book Here

Book Description

Author: Daniel C. Murray
Publisher:
ISBN:
Category : Roads
Languages : en
Pages :

Get Book Here

Book Description
As the U.S. population and economy continue to grow, more pressure is being placed on the nation's road and bridge infrastructure today than at any point in history. This growth has left the nation's system of roads and bridges in a perpetual state of repair. As all motorists are aware, road maintenance and construction work projects often cause significant traffic congestion, as well as contribute to an increasing number of accidents and fatalities. Work zone-related crashes that involve large trucks are often more serious and more likely to result in fatalities. In order to mitigate the consequences of large truck crashes in work zones, research is needed to understand the causes of truck accidents in work zones and from those findings, develop appropriate countermeasures to reduce the frequency and severity of large truck work zone crashes. The American Transportation Research Institute (ATRI) initiated this research to investigate the factors that contribute to truck-involved work zone accidents. The research first looked at characteristics of large truck-involved work zone crashes and found that differences exist in the time of day and day of week of occurrence, as well as the number of vehicles typically involved and the type of crash (rear-end, sideswipe, etc.) for large truck work zone crashes versus all work zone crashes. Additionally, the research identified several work zone geometric and traffic control device considerations which may improve large truck safety in work zones, including lane and shoulder widths, and signage. The research also determined that a number of knowledge gaps still exist as related to the underlying causes or contributory factors related to large truck crashes in work zones, such as exposure, driver behavior, and work zone design. Finally, the research proposes a number of potential countermeasures to improve large truck safety in work zones.

Author: Tarek M. Elghamrawy
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
Recent studies indicate that work zones suffer from an increasing trend of deaths and injuries in and around the highway construction areas with an average of 745 fatalities and 40,700 severe injuries per year. To control and minimize work zone fatalities and injuries, the Federal Highway Administration (FHWA), American Association of State Highway and Transportation Officials (AASHTO), and many state Departments of Transportation (DOTs) are seeking to improve the design practices of work zones to reduce work zone crashes. To support this vital and pressing highway safety goal, this research study focuses on analyzing and optimizing existing work zone practices and exploring the effectiveness and efficiency of innovative temporary rumble strips that can be used to minimize crashes in and around highway construction and maintenance projects. The research objectives of this study are to: (1) provide enhanced understanding of the impact of work zone parameters and innovative temporary traffic control devices on the safety of highway construction zones; (2) analyze work zone crashes and current practices to identify potential layout parameters that impact work zone crash occurrence; (3) investigate and quantify the impact of work zone layout parameters on the risk and cost of crash occurrence; (4) optimize work zone setup parameters to minimize total work zone costs including agency, user delay, and expected crash costs; (5) conduct field experiments to analyze the efficiency and constructability of various arrangements of temporary rumble strips prior to and at the edge of work zones; and (6) study and enhance the effectiveness of temporary rumble strips in alerting inattentive drivers prior to and at the edge of work zones. In order to achieve these objectives, the study is conducted in seven major tasks that focus on: (1) conducting a comprehensive literature review; (2) collecting and fusing all available data and reports on work zone crashes in Illinois; (3) analyzing work zone crashes and identifying the probable causes and contributing factors; (4) identifying the impact of layout parameters on risk of crash occurrence; (5) developing an optimization model to minimize total work zone costs including agency cost, user delay cost, and expected work zone crash cost; (6) performing field experiments on temporary rumble strips and evaluate the efficiency of utilization on site; and (7) evaluating the effectiveness of temporary rumble strips prior and at the edge of work zones. The main research developments of this study are expected to have significant impacts on (1) identifying potential work zone parameters and contributing causes that impact work zone crash occurrence; (2) estimating the probability of work zones to encounter severe crashes; (3) quantifying the impact of work zone parameters on the risk levels of crash occurrence; (4) estimating the monetary value of work zone crashes based on work zone layout parameters; (5) searching for and identifying optimal work zone setup solutions that specify segment length, operating speed, TTC policy, and concrete barrier at different operation staring times; (6) developing new efficient prototypes of temporary rumble strips to be utilized prior to and at the edge of work zones; and (7) developing practical guidelines for effective design arrangements of temporary rumble strips. These new developments hold a strong promise to: (a) improve work zone safety for both the travelling public and construction workers; (b) improve current work zone layouts, strategies, and standards; (c) provide a baseline for controlling the risk of crash occurrence due to highway work zones; (d) assist construction planners in identifying optimal work zone setups for highway construction; (e) direct the development of practical recommendations for efficient and effective design arrangements of temporary rumble strips; and (f) reduce work zone crashes in the work area through the implementation of practical temporary rumble strips arrangements.

Author: European Conference of Ministers of Transport
Publisher: OECD Publishing
ISBN: 9282103781
Category :
Languages : en
Pages : 286

Get Book Here

Book Description
Speeding is the number one road safety problem in a large number of OECD/ECMT countries. It is responsible for around one third of the current, unacceptably high levels of road fatalities. Speeding has an impact not only on accidents but also on the ...

Author: Gerald L. Ullman
Publisher:
ISBN:
Category : Road work zones
Languages : en
Pages : 0

Get Book Here

Book Description
This implementation guide describes the conceptual framework, data requirements, and computational procedures for determining the safety and mobility impacts of work zones in Texas. Researchers designed the framework and procedures to assist district-level personnel who have responsibility for work zone safety and mobility impact reviews of significant projects as required by Texas Department of Transportation (TxDOT) policy. In this guide, researchers describe the types of impact monitoring and analysis that can occur as part of ongoing project activities and those that can be performed during post-project reviews. Analysis procedures are presented to assist in determining which projects should be targeted for regular reviews of crash data during the project, as well as the increase in crash frequency that is indicative of unusual safety concerns that should be investigated further through field observations. Researchers also present analysis procedures to guide district personnel in determining the queue lengths, individual vehicle delays, and total vehicle-hours of delay that are created during temporary lane closures in a project.

Author: American Association of State Highway and Transportation Officials. Task Force for Roadside Safety
Publisher:
ISBN:
Category : Roads
Languages : en
Pages : 560

Get Book Here

Book Description

Author: Richard W. McLay
Publisher: Academic Press
ISBN: 0128132418
Category : Law
Languages : en
Pages : 636

Get Book Here

Book Description
Engineering Standards for Forensic Application presents the technologies and law precedents for the application of engineering standards to forensic opinions, discussing Fundamentals, Disciplines, Engineering Standards, The Basics and the Future of Forensics. The book explores the engineering standard and how it is used by experts to give opinions that are introduced into evidence, and how they are assumed to be the best evidence known on the topic at hand. Final sections include coverage of NFL Brain Injuries and the Flint Water Crisis. Examples of the use of engineering standards are shown and discussed throughout the work. Addresses a wide variety of forensic engineering areas, including relevant law Provides a new approach of study that includes the work of both engineers and litigators Contains contributions from over 40 experts, offering the reader examples of general forensic methods that are based on reliable engineering practice