The Use of Delft3D to Simulate the Deposition of Cohesive and Non-Cohesive Sediments in Irrigation Systems PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download The Use of Delft3D to Simulate the Deposition of Cohesive and Non-Cohesive Sediments in Irrigation Systems PDF full book. Access full book title The Use of Delft3D to Simulate the Deposition of Cohesive and Non-Cohesive Sediments in Irrigation Systems by Shaimaa Abd Al-Amear Theol. Download full books in PDF and EPUB format.
Author: Shaimaa Abd Al-Amear Theol
Publisher: CRC Press
ISBN: 1000069249
Category : Science
Languages : en
Pages : 159
Get Book Here
Book Description
Sediment deposition threatens the performance of many irrigation systems. Because of the high impact on irrigation performance and crop production, many studies have been done on how to deal with sediment deposition. In this research, the Delft3D model, originally developed for hydro-morphologic modeling of rivers and estuaries, was adapted for the use in irrigation systems simulations and applied to different case studies. This research addresses two shortcomings of previous studies of sediments in irrigation systems. Firstly, while previous studies primarily used 1D models, this research uses a 2D/3D model. The use of 2D/3D models in irrigation systems is significant because the non-uniform flow around structures such as offtakes, weirs and gates, leads to asymmetric sedimentation patterns that are missed by 1D simulations. Secondly, whereas previous studies mostly considered non-cohesive sediments, this research simulates cohesive, non-cohesive and a mix of both sediment types. This is important for irrigation systems that draw water from natural rivers that carry a mix of cohesive and non-cohesive sediments. The findings of this research are important for irrigation system maintenance and gate operation. It is also essential for the development of canal operating plans that meet crop water requirements and at the same time minimizes sediment deposition by alternating gates.
Author: Shaimaa Abd Al-Amear Theol
Publisher: CRC Press
ISBN: 1000069249
Category : Science
Languages : en
Pages : 159
Get Book Here
Book Description
Sediment deposition threatens the performance of many irrigation systems. Because of the high impact on irrigation performance and crop production, many studies have been done on how to deal with sediment deposition. In this research, the Delft3D model, originally developed for hydro-morphologic modeling of rivers and estuaries, was adapted for the use in irrigation systems simulations and applied to different case studies. This research addresses two shortcomings of previous studies of sediments in irrigation systems. Firstly, while previous studies primarily used 1D models, this research uses a 2D/3D model. The use of 2D/3D models in irrigation systems is significant because the non-uniform flow around structures such as offtakes, weirs and gates, leads to asymmetric sedimentation patterns that are missed by 1D simulations. Secondly, whereas previous studies mostly considered non-cohesive sediments, this research simulates cohesive, non-cohesive and a mix of both sediment types. This is important for irrigation systems that draw water from natural rivers that carry a mix of cohesive and non-cohesive sediments. The findings of this research are important for irrigation system maintenance and gate operation. It is also essential for the development of canal operating plans that meet crop water requirements and at the same time minimizes sediment deposition by alternating gates.
Author:
Publisher:
ISBN: 9789463952316
Category :
Languages : en
Pages : 146
Get Book Here
Book Description
Author: Shaimaa Abd Al-Amear Theol
Publisher: CRC Press
ISBN: 1000069265
Category : Science
Languages : en
Pages : 129
Get Book Here
Book Description
Sediment deposition threatens the performance of many irrigation systems. Because of the high impact on irrigation performance and crop production, many studies have been done on how to deal with sediment deposition. In this research, the Delft3D model, originally developed for hydro-morphologic modeling of rivers and estuaries, was adapted for the use in irrigation systems simulations and applied to different case studies. This research addresses two shortcomings of previous studies of sediments in irrigation systems. Firstly, while previous studies primarily used 1D models, this research uses a 2D/3D model. The use of 2D/3D models in irrigation systems is significant because the non-uniform flow around structures such as offtakes, weirs and gates, leads to asymmetric sedimentation patterns that are missed by 1D simulations. Secondly, whereas previous studies mostly considered non-cohesive sediments, this research simulates cohesive, non-cohesive and a mix of both sediment types. This is important for irrigation systems that draw water from natural rivers that carry a mix of cohesive and non-cohesive sediments. The findings of this research are important for irrigation system maintenance and gate operation. It is also essential for the development of canal operating plans that meet crop water requirements and at the same time minimizes sediment deposition by alternating gates.
Author: Artur Radecki-Pawlik
Publisher: MDPI
ISBN: 3039364510
Category : Technology & Engineering
Languages : en
Pages : 286
Get Book Here
Book Description
After publishing the famous “Fluvial Processes in Geomorphology” in the early 1960s, the work of Luna Leopold, Gordon Wolman, and John Miller became a key for opening the door to understanding rivers and streams. They first illustrated the problem to geomorphologists and geographers. Later, Chang, in his “Fluvial Processes in River Engineering”, provided a basis for engineers, showing this group of professionals how to deal with rivers and how to understand them. Since then, more informative studies have been published. Many of the authors started to combine fluvial geomorphology knowledge and river engineering needs, such as “Tools in Fluvial Geomorphology” by G. Mathias Kondolf and Hervé Piégay, or focused more on river engineering tasks, such as “Stream Restoration in Dynamic Fluvial Systems: Scientific Approaches” by Andrew Simon, Sean Bennett, and Janine Castro. Finally, Luna Leopold summarized river and stream morphologies in the beautiful “A view of the river”. It appears that we continue to explore this subject in the right direction. We better understand rivers and streams, and as engineers and fluvial geomorphologists, we can establish tools to help bring rivers alive. However, there is still a hunger for more scientific tools that we could use to further understand rivers and to support the development of healthy streams and rivers with high biodiversity in the present world, which has started to face water scarcity.
Author: Mohamed Meddi
Publisher: MDPI
ISBN: 3039214314
Category : Technology & Engineering
Languages : en
Pages : 212
Get Book Here
Book Description
Climate and anthropogenic changes impact the conditions of erosion and sediment transport in rivers. Rainfall variability and, in many places, the increase of rainfall intensity have a direct impact on rainfall erosivity. Increasing changes in demography have led to the acceleration of land cover changes in natural areas, as well as in cultivated areas, and, sometimes, in degraded areas and desertified landscapes. These anthropogenized landscapes are more sensitive to erosion. On the other hand, the increase in the number of dams in watersheds traps a great portion of sediment fluxes, which do not reach the sea in the same amount, nor at the same quality, with consequences on coastal geomorphodynamics. This book is dedicated to studies on sediment fluxes from continental areas to coastal areas, as well as observation, modeling, and impact analysis at different scales from watershed slopes to the outputs of large river basins. This book is concentrated on a number of keywords: “erosion” and “sediment transport”, “model” and “practice”, and “change”. The keywords are briefly discussed with respect to the relevant literature. The contributions in this book address observations and models based on laboratory and field data, allowing researchers to make use of such resources in practice under changing conditions.
Author: Andrés Díez Herrero
Publisher: IGME
ISBN: 9788478408139
Category :
Languages : en
Pages : 196
Get Book Here
Book Description
Author: VO QUOC. THANH
Publisher: CRC Press
ISBN: 9781032046143
Category :
Languages : en
Pages : 186
Get Book Here
Book Description
This research aims to investigate the prevailing sediment dynamics and the sediment budget in the Mekong Delta by using a process-based model. Understanding sediment dynamics for the Mekong Delta requires high resolution analysis and detailed data, which is a challenge for managers and scientists. This study introduces such an approach and focuses on modeling the entire system with a process-based approach with Delft3D-4 and Delft3D Flexible Mesh (DFM). The first model is used to explore sediment dynamics at the coastal zone. The latter model allows straightforward coupling of 1D and 2D grids, making it suitable for analyzing the complex river and canal network of the Mekong Delta. The validated model suggests that the Mekong Delta receives 99 Mt/year sediment from the Mekong River. This is much lower than the common estimate of 160 Mt/year. Only about 23% of the modelled total sediment load at Kratie is exported to the sea. The remaining portion is trapped in the rivers and floodplains of the Mekong Delta. The results advance understanding of sediment dynamics and sediment budget in the Mekong Delta. As such the model is an efficient tool to support delta management and planning.
Author: Dano Roelvink
Publisher: World Scientific
ISBN: 9814304255
Category : Science
Languages : en
Pages : 291
Get Book Here
Book Description
Process-based morphodynamic modelling is one of the relatively new tools at the disposal of coastal scientists, engineers and managers. On paper, it offers the possibility to analyse morphological processes and to investigate the effects of various measures one might consider to alleviate some problems. For these to be applied in practice, a model should be relatively straightforward to set up. It should be accurate enough to represent the details of interest, it should run long enough and robustly to see the real effects happen, and the physical processes represented in such a way that the sediment generally goes in the right direction at the right rate. Next, practitioners must be able to judge if the patterns and outcomes of the model are realistic and finally, translate these colour pictures and vector plots to integrated parameters that are relevant to the client or end user. In a nutshell, this book provides an in-depth review of ways to model coastal processes, including many hands-on exercises.
Author: G. L. Asawa
Publisher: New Age International
ISBN: 812241673X
Category : Groundwater
Languages : en
Pages : 38
Get Book Here
Book Description
The Book Irrigation And Water Resources Engineering Deals With The Fundamental And General Aspects Of Irrigation And Water Resources Engineering And Includes Recent Developments In Hydraulic Engineering Related To Irrigation And Water Resources Engineering. Significant Inclusions In The Book Are A Chapter On Management (Including Operation, Maintenance, And Evaluation) Of Canal Irrigation In India, Detailed Environmental Aspects For Water Resource Projects, A Note On Interlinking Of Rivers In India, And Design Problems Of Hydraulic Structures Such As Guide Bunds, Settling Basins Etc.The First Chapter Of The Book Introduces Irrigation And Deals With The Need, Development And Environmental Aspects Of Irrigation In India. The Second Chapter On Hydrology Deals With Different Aspects Of Surface Water Resource. Soil-Water Relationships Have Been Dealt With In Chapter 3. Aspects Related To Ground Water Resource Have Been Discussed In Chapter 4. Canal Irrigation And Its Management Aspects Form The Subject Matter Of Chapters 5 And 6. Behaviour Of Alluvial Channels And Design Of Stable Channels Have Been Included In Chapters 7 And 8, Respectively. Concepts Of Surface And Subsurface Flows, As Applicable To Hydraulic Structures, Have Been Introduced In Chapter 9. Different Types Of Canal Structures Have Been Discussed In Chapters 10, 11, And 13. Chapter 12 Has Been Devoted To Rivers And River Training Methods. After Introducing Planning Aspects Of Water Resource Projects In Chapter 14, Embankment Dams, Gravity Dams And Spillways Have Been Dealt With, Respectively, In Chapters 15, 16 And 17.The Students Would Find Solved Examples (Including Design Problems) In The Text, And Unsolved Exercises And The List Of References Given At The End Of Each Chapter Useful.
Author: Daniel P. Loucks
Publisher: Springer
ISBN: 3319442341
Category : Technology & Engineering
Languages : en
Pages : 635
Get Book Here
Book Description
This book is open access under a CC BY-NC 4.0 license. This revised, updated textbook presents a systems approach to the planning, management, and operation of water resources infrastructure in the environment. Previously published in 2005 by UNESCO and Deltares (Delft Hydraulics at the time), this new edition, written again with contributions from Jery R. Stedinger, Jozef P. M. Dijkman, and Monique T. Villars, is aimed equally at students and professionals. It introduces readers to the concept of viewing issues involving water resources as a system of multiple interacting components and scales. It offers guidelines for initiating and carrying out water resource system planning and management projects. It introduces alternative optimization, simulation, and statistical methods useful for project identification, design, siting, operation and evaluation and for studying post-planning issues. The authors cover both basin-wide and urban water issues and present ways of identifying and evaluating alternatives for addressing multiple-purpose and multi-objective water quantity and quality management challenges. Reinforced with cases studies, exercises, and media supplements throughout, the text is ideal for upper-level undergraduate and graduate courses in water resource planning and management as well as for practicing planners and engineers in the field.
