Applications of Activated Sludge Models PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Applications of Activated Sludge Models PDF full book. Access full book title Applications of Activated Sludge Models by Damir Brdjanovic. Download full books in PDF and EPUB format.
Author: Damir Brdjanovic
Publisher: IWA Publishing
ISBN: 1780404638
Category : Science
Languages : en
Pages : 472
Get Book Here
Book Description
In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.
Author: Damir Brdjanovic
Publisher: IWA Publishing
ISBN: 1780404638
Category : Science
Languages : en
Pages : 472
Get Book Here
Book Description
In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.
Author: Leiv Rieger
Publisher: IWA Publishing
ISBN: 1843391740
Category : Science
Languages : en
Pages : 287
Get Book Here
Book Description
Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22
Author: Dwight Houweling
Publisher: CRC Press
ISBN: 0429535899
Category : Technology & Engineering
Languages : en
Pages : 133
Get Book Here
Book Description
Intensifying Activated Sludge Using Media-Supported Biofilms will be of interest to practicing wastewater treatment process designers, along with those seeking more compact and energy-efficient wastewater treatment options. The advantages of Moving Bed Biological Reactor (MBBR)-based hybrid processes are now well-established in practice, leading to their increased use in the field. Membrane Aerated Biofilm Reactor (MABR)-based hybrid processes are much newer and offer further systematic process and energy advantages. This book examines the evolution of hybrid technologies as well as the potential for continued improvement of biological wastewater treatment techniques. Features: Reviews current approaches for intensifying biological wastewater treatment processes and their mechanistic bases. Examines hybrid suspended growth/biofilm-based wastewater treatment processes, including the newly-developed MABR-based processes, and their unique dynamic performance characteristics. Presents a novel method for characterizing the performance and process intensification advantages of hybrid processes. Provides guidance for simulating the performance of hybrid processes, including oxygen transfer in MABR hybrid processes.
Author: Jacek Makinia
Publisher: IWA Publishing
ISBN: 1780409516
Category : Science
Languages : en
Pages : 682
Get Book Here
Book Description
Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.
Author:
Publisher:
ISBN:
Category : Hydrology
Languages : en
Pages : 884
Get Book Here
Book Description
Author: P. Reichert
Publisher: IWA Publishing
ISBN: 9781900222822
Category : Science
Languages : en
Pages : 150
Get Book Here
Book Description
This Scientific and Technical Report (STR) presents the findings of the IWA Task Group on River Water Quality Modelling (RWQM). The task group was formed to create a scientific and technical base from which to formulate standardized, consistent river water quality models and guidelines for their implementation. This STR presents the first outcome in this effort: River Water Quality Model No. 1 (RWQM1). As background to the development of River Water Quality Model No.1, the Task Group completed a critical evaluation of the current state of the practice in water quality modelling. A major limitation in model formulation is the continued reliance on BOD as the primary state variable, despite the fact BOD does not include all biodegradable matter. A related difficulty is the poor representation of benthic flux terms. As a result of these limitations, it is impossible to close mass balances completely in most existing models. These various limitations in current river water quality models impair their predictive ability in situations of marked changes in a river's pollutant load, streamflow, morphometry, or other basic characteristics. RWQM 1 is intended to serve as a framework for river water quality models that overcome these deficiencies in traditional water quality models and most particularly the failure to close mass balances between the water column and sediment. To these ends, the model incorporates fundamental water quality components and processes to characterise carbon, oxygen, nitrogen, and phosphorus (C, O, N, and P) cycling instead of biochemical oxygen demand as used in traditional models. The model is presented in terms of process and components represented via a 'Petersen stoichiometry matrix', the same approach used for the IWA Activated Sludge Models. The full RWQM1 includes 24 components and 30 processes. The report provides detailed examples on reducing the numbers of components and processes to fit specific water quality problems. Thus, the model provides a framework for both complicated and simplified models. Detailed explanations of the model components, process equations, stoichiometric parameters, and kinetic parameters are provided, as are example parameter values and two case studies. The STR is intended to launch a participatory process of model development, application, and refinement. RWQM1 provides a framework for this process, but the goal of the Task Group is to involve water quality professionals worldwide in the continued work developing a new water quality modelling approach. This text will be an invaluable reference for researchers and graduate students specializing in water resources, hydrology, water quality, or environmental modelling in departments of environmental engineering, natural resources, civil engineering, chemical engineering, environmental sciences, and ecology. Water resources engineers, water quality engineers and technical specialists in environmental consultancy, government agencies or regulated industries will also value this critical assessment of the state of practice in water quality modelling. Key Features presents a unique new technical approach to river water quality modelling provides a detailed technical presentation of the RWQM1 water quality process model gives an informative critical evaluation of the state of the practice in water quality modelling, and problems with those practices provides a step by step procedure to develop a water quality model Scientific & Technical Report No. 12
Author: Michael H. Gerardi
Publisher: Chemical Publishing Company
ISBN: 082060416X
Category : Technology & Engineering
Languages : en
Pages : 176
Get Book Here
Book Description
Contents - List of Tables - List of Figures - PART ONE: NITRIFICATION - Chapter 1 Introduction - Chapter 2 Nitrogenous and Phosphorous Compounds - Chapter 3 Nitrification: The Basics - Chapter 4 Nitrifying Bacteria - Chapter 5 Nitrification and Limiting Factors - Chapter 6 Promoting Nitrification - PART TWO: DENITRIFICATION - Chapter 7 Denitrification: The Basics - Chapter 8 Denitrifying Bacteria - Chapter 9 Denitrification and Limiting Factors - PART THREE: BIOLOGICAL PHOSPHORUS REMOVAL - Chapter 10 Biological Phosphorus Removal: The Basics - Chapter 11 EBPR: Process Control - Abbreviations and Acronyms - Glossary - Bibliography - Biological nutrient removal (BNR), the removal of nitrogen and phosphorus from wastewater, is a complex process. Although the activated sludge process is an efficient technology for the removal of biochemical oxygen demand (BOD) and total suspended solids (TSS), it provides less-than-optimal conditions for the removal of nitrogen and phosphorus, and presents numerous challenges to the operator trying to satisfy the many requirements for several different groups of bacteria. In addition to satisfying the requirements there are numerous, highly variable operational conditions that impact BNR. These conditions include: changes in strength and composition of the wastewater, alkalinity and pH, temperature, and presence of inhibitory and toxic wastes. Even fluctuations in flows, especially from inflow and infiltration, can adversely impact the aerobic, anoxic, and anaerobic conditions needed for successful BNR. Of the three treatment processes, nitrification, denitrification, and enhanced biological removal, nitrification is often the most difficult to achieve. Therefore, a large portion of this book reviews nitrification. Operators of the activated sludge process need to understand the basic biological, chemical, and physical requirements for BNR in order to improve the performance of these treatment processes. An Operator's Guide to Biological Nutrient Removal (BNR) in the Activated Sludge Process is intended to help operators in the monitoring, troubleshooting, and process control of BNR. Numerous tables and figures are included in the book to help the operator understand the biological and chemical reactions that are involved in BNR processes and how the reactions can be monitored for process control. Design of BNR processes is not addressed in this book. Design is addressed in numerous engineering publications. The book serves to help operators achieve permit compliance for nitrogen and phosphorus discharge limits and obtain cost-effective operation. -
Author: Eldon R. Rene
Publisher: IWA Publishing
ISBN: 1789061016
Category : Technology & Engineering
Languages : en
Pages : 230
Get Book Here
Book Description
This book highlights the impacts of emerging pollutants (both organic and inorganic) in water bodies and the role and performances of different water and wastewater treatment approaches that are presently being employed in the field of environmental engineering. Some of these approaches are focused on ‘end-of-pipe’ treatment, while most of these approaches are focused on the application of novel physic-chemical and biological techniques for wastewater treatment and reuse. The goal of this book is to present the emerging technologies and trends in the field of water and wastewater treatment. The papers in this book provide clear proof that environmentally friendly (bio)technologies are becoming more and more important and playing a critical role in removing a wide variety of organic and inorganic pollutants from water. In Focus – a book series that showcases the latest accomplishments in water research. Each book focuses on a specialist area with papers from top experts in the field. It aims to be a vehicle for in-depth understanding and inspire further conversations in the sector.
Author:
Publisher:
ISBN:
Category : Sewage
Languages : en
Pages : 118
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Dissertations, Academic
Languages : en
Pages : 772
Get Book Here
Book Description
