Radiation Safety Aspects of the Linac Coherent Light Source Project At SLAC.

Radiation Safety Aspects of the Linac Coherent Light Source Project At SLAC. PDF Author: A. Fasso
Publisher:
ISBN:
Category :
Languages : en
Pages : 18

Get Book Here

Book Description
The Linac Coherent Light Source (LCLS) is a Self-Amplified Spontaneous Emission based Free Electron Laser (FEL) that is being designed and built at the Stanford Linear Accelerator Center (SLAC) by a multilaboratory collaboration. This facility will provide ultra-short pulses of coherent x-ray radiation with the fundamental harmonic energy tunable over the energy range of 0.82 to 8.2 keV. One-third of the existing SLAC LINAC will compress and accelerate the electron beam to energies ranging from 4.5 GeV to 14.35 GeV. The beam will then be transported through a 130-meter long undulator, emit FEL and spontaneous radiation. After passing through the undulator, the electron beam is bent to the main electron dump. The LCLS will have two experiment halls as well as x-ray optics and infrastructure necessary to make use of the FEL for research and development in a variety of scientific fields. The facility design will incorporate features that would make it possible to expand in future such that up to 6 independent undulators can be used. While some of the radiation protection issues for the LCLS are similar to those encountered at both high-energy electron linacs and synchrotron radiation facilities, LCLS poses new challenges as well. Some of these new issues include: the length of the facility and of the undulator, the experimental floor in line with the electron beam and the occupancy near zero degrees, and the very high instantaneous intensity of the FEL. The shielding design criteria, methodology, and results from Monte Carlo and analytical calculations are presented.

Radiation Safety Analysis for the Experimental Hutches at the Linac Coherent Light Source at SLAC.

Radiation Safety Analysis for the Experimental Hutches at the Linac Coherent Light Source at SLAC. PDF Author: S. H. Rokni
Publisher:
ISBN:
Category :
Languages : en
Pages : 4

Get Book Here

Book Description
The LCLS, the world's first x-ray free electron laser, will be constructed at the Stanford Linear Accelerator Center and is expected to be completed in 2009. A two-mirror system will be used in order to reduce background radiation in near and far experimental hutches. This paper describes the layout of the two-mirror system and also reports on the shielding requirements for the experimental hutches. Two beam loss scenarios for radiation sources are discussed: losses from the high energy electron beam hitting beam components and x-rays produced in the 130 m long undulator and scattered on x-ray mirrors. The FLUKA Monte-Carlo particle transport code was used for the shielding design and for the determination of the radiation levels around the experimental hutches.

Radiation Safety Aspects of the LCLS-II Accelerator at SLAC.

Radiation Safety Aspects of the LCLS-II Accelerator at SLAC. PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 6

Get Book Here

Book Description


Radiation Protection Aspects in the Design of the Linac Coherent Light Source II.

Radiation Protection Aspects in the Design of the Linac Coherent Light Source II. PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 4

Get Book Here

Book Description


The Linac Coherent Light Source at SLAC. Radiological Considerations and Shielding Calculations

The Linac Coherent Light Source at SLAC. Radiological Considerations and Shielding Calculations PDF Author: A. Fasso
Publisher:
ISBN:
Category :
Languages : en
Pages : 4

Get Book Here

Book Description
The Linac Coherent Light Source (LCLS) at SLAC will be the world's first X-ray free electron laser when it becomes operational in 2009. Pulses of X-ray laser light from LCLS will be many orders of magnitude brighter and several orders of magnitude shorter than what can be produced by other X-ray sources available in the world. These characteristics will enable frontier new science in many areas. This paper describes the LCLS beam parameters and its lay-out. Results of the Monte Carlo calculations for the shielding design of the electron dump line, radiation damage to undulator, the residual radiation and the soil activation around the electron dump are presented.

Radiation Protection Aspects of the Linac Coherent Light Source Front End

Radiation Protection Aspects of the Linac Coherent Light Source Front End PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
The Front End Enclosure (FEE) of the Linac Coherent Light Source (LCLS) is a shielding housing located between the electron dump area and the first experimental hutch. The upstream part of the FEE hosts the commissioning diagnostics for the FEL beam. In the downstream part of the FEE, two sets of grazing incidence mirror and several collimators are used to direct the beam to one of the experimental stations and reduce the bremsstrahlung background and the hard component of the spontaneous radiation spectrum. This paper addresses the beam loss assumptions and radiation sources entering the FEE used for the design of the FEE shielding using the Monte-Carlo code FLUKA. The beam containment system prevents abnormal levels of radiations inside the FEE and ensures that the beam remains in its intended path is also described.

Radiation Protection Aspects of the Linac Coherent Light Source Front End Enclosure

Radiation Protection Aspects of the Linac Coherent Light Source Front End Enclosure PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 4

Get Book Here

Book Description
The Front End Enclosure (FEE) of the Linac Coherent Light Source (LCLS) is a shielding housing located between the electron dump area and the first experimental hutch. The upstream part of the FEE hosts the commissioning diagnostics for the FEL beam. In the downstream part of the FEE, two sets of grazing incidence mirror and several collimators are used to direct the beam to one of the experimental stations and reduce the bremsstrahlung background and the hard component of the spontaneous radiation spectrum. This paper addresses the beam loss assumptions and radiation sources entering the FEE used for the design of the FEE shielding using the Monte-Carlo code FLUKA. The beam containment system prevents abnormal levels of radiations inside the FEE and ensures that the beam remains in its intended path is also described.

Commissioning of the Electron Line of the Linac Coherent Light Source. Dose Rate Measurements and Simulations

Commissioning of the Electron Line of the Linac Coherent Light Source. Dose Rate Measurements and Simulations PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 9

Get Book Here

Book Description
The Linac Coherent Light Source at the SLAC National Accelerator Laboratory (operated by Stanford University for the US Department of Energy) is the world's first hard X-ray Free Electron Laser machine. It uses high energy electrons delivered by a linac to create ultrafast and brilliant X-ray pulses that can be used as a 'high-speed' camera to obtain images of atoms and molecules. LCLS is a pioneer machine and, as such, its design has encountered unprecedented challenges, the solutions to which will benefit future facilities of its kind across the globe. This article describes the radiation protection aspects of LCLS electron beamlines. Special emphasis is put on the successful commissioning of the LCLS electron line, where, for all examined loss sources, the measured prompt and residual dose rates are in agreement with or below the values predicted through detailed Monte Carlo simulations, used earlier to design the shielding.

The LINAC Coherent Light Source and Radiological Issues During the Commissioning

The LINAC Coherent Light Source and Radiological Issues During the Commissioning PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
The Linac Coherent Light Source (LCLS) at SLAC National Accelerator Laboratory is the world's first X-ray free electron laser (XFEL). Pulses of x-ray laser light from LCLS will be many orders of magnitude brighter and several orders of magnitude shorter than what can be produced by other x-ray sources available in the world. These characteristics will enable frontier new science in many areas. This paper describes the LCLS beam parameters and lay-out. The general radiological issues during commissioning are presented, such as radiation dose rates and integrated doses outside the enclosure. Also, specific radiological issues related to X-ray free electron lasers are discussed. XFEL with high peak power will burn through high-Z materials. The X-ray beam needs to be blocked by stoppers when the downstream areas are occupied. LCLS stoppers feature a piece of boron carbide (B4C), 10 mm thick. B4C is one of the best materials since it has a low absorption coefficient for X-rays and a high melting temperature. Theoretical calculations indicate that the unfocused fluence of the LCLS XFEL beam should be about one order of magnitude below the damage threshold for bulk B4C, for 830 eV FEL radiation. However, these calculations have not been tested experimentally and cannot be validated until LCLS begins providing 830 eV XFEL pulses. This paper describes the test plan for using the initial LCLS radiation to evaluate the survivability of B4C and reports the preliminary results. Another major issue for LCLS is the potential radiation damage to the LCLS undulator magnets during operation. TLD dosimeters were installed along the LCLS undulators for each period of two or three weeks. This paper reports the integrated doses along the undulators with and without XFEL generation.

Linac Coherent Light Source (LCLS) Design Study Report

Linac Coherent Light Source (LCLS) Design Study Report PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 300

Get Book Here

Book Description
The Stanford Linear Accelerator Center (SLAC), in collaboration with Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and the University of California at Los Angeles, is proposing to build a Free-Electron-Laser (FEL) R and D facility operating in the self-amplified spontaneous emission (SASE) mode in the wavelength range 1.5--15 Å. This FEL, called Linac Coherent Light Source (LCLS), utilizes the SLAC linac and produces sub-picosecond pulses of short wavelength x-rays with very high peak brightness and full transverse coherence. In this report, the Design Team has established performance parameters for all the major components of the LCLS and developed a layout of the entire system. Chapter 1 is the Executive Summary. Chapter 2 (Overview) provides a brief description of each of the major sections of the LCLS, from the rf photocathode gun, through the experimental stations and electron beam dump. Chapter 3 describes the scientific case for the LCLS. Chapter 4 provides a review of the principles of the FEL physics that the LCLS is based on, and Chapter 5 discusses the choice of the system's physical parameters. Chapters 6 through 10 describe in detail each major element of the system. Chapters 11 through 13 respectively cover undulator controls, mechanical alignment, and radiation issues.