Physics Design of a Cold Neutron Source for KIPT Neutron Source Facility

Physics Design of a Cold Neutron Source for KIPT Neutron Source Facility PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
Argonne National Laboratory (ANL) of USA and Kharkov Institute of Physics and Technology (KIPT) of Ukraine have been collaborating on the conceptual design development of a neutron source facility. It is based on the use of an electron accelerator driven subcritical (ADS) facility with low enriched uranium fuel, using the existing electron accelerators at KIPT of Ukraine [1]. The neutron source of the subcritical assembly is generated from the interaction of 100-KW electron beam, which has a uniform spatial distribution and the electron energy in the range of 100 to 200 MeV, with a natural uranium target [2]. The main functions of the facility are the production of medical isotopes and the support of the Ukraine nuclear power industry. Neutron beam experiments and material studies are also included. Over the past two-three decades, structures with characteristic lengths of 100 Å and correspondingly smaller vibrational energies have become increasingly important for both science and technology [3]. The characteristic dimensions of the microstructures can be well matched by neutrons with longer vibrational wavelength and lower energy. In the accelerator-driven subcritical facility, most of the neutrons are generated from fission reactions with energy in the MeV range. They are slowed down to the meV energy range through scattering reactions in the moderator and reflector materials. However, the fraction of neutrons with energies less than 5 meV in a normal moderator spectrum is very low because of up-scattering caused by the thermal motion of moderator or reflector molecules. In order to obtain neutrons with energy less than 5 meV, cryogenically cooled moderators 'cold neutron sources' should be used to slow down the neutrons. These cold moderators shift the neutron energy spectrum down because the thermal motion of moderator molecules as well as the up-scattering is very small, which provides large gains in intensity of low energy neutrons, E

Physics Design of a Cold Neutron Source for KIPT Neutron Source Facility

Physics Design of a Cold Neutron Source for KIPT Neutron Source Facility PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
Argonne National Laboratory (ANL) of USA and Kharkov Institute of Physics and Technology (KIPT) of Ukraine have been collaborating on the conceptual design development of a neutron source facility. It is based on the use of an electron accelerator driven subcritical (ADS) facility with low enriched uranium fuel, using the existing electron accelerators at KIPT of Ukraine [1]. The neutron source of the subcritical assembly is generated from the interaction of 100-KW electron beam, which has a uniform spatial distribution and the electron energy in the range of 100 to 200 MeV, with a natural uranium target [2]. The main functions of the facility are the production of medical isotopes and the support of the Ukraine nuclear power industry. Neutron beam experiments and material studies are also included. Over the past two-three decades, structures with characteristic lengths of 100 Å and correspondingly smaller vibrational energies have become increasingly important for both science and technology [3]. The characteristic dimensions of the microstructures can be well matched by neutrons with longer vibrational wavelength and lower energy. In the accelerator-driven subcritical facility, most of the neutrons are generated from fission reactions with energy in the MeV range. They are slowed down to the meV energy range through scattering reactions in the moderator and reflector materials. However, the fraction of neutrons with energies less than 5 meV in a normal moderator spectrum is very low because of up-scattering caused by the thermal motion of moderator or reflector molecules. In order to obtain neutrons with energy less than 5 meV, cryogenically cooled moderators 'cold neutron sources' should be used to slow down the neutrons. These cold moderators shift the neutron energy spectrum down because the thermal motion of moderator molecules as well as the up-scattering is very small, which provides large gains in intensity of low energy neutrons, E

Physics Analyses in the Design of the HFIR Cold Neutron Source

Physics Analyses in the Design of the HFIR Cold Neutron Source PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 5

Get Book Here

Book Description
Physics analyses have been performed to characterize the performance of the cold neutron source to be installed in the High Flux Isotope Reactor at the Oak Ridge National Laboratory in the near future. This paper provides a description of the physics models developed, and the resulting analyses that have been performed to support the design of the cold source. These analyses have provided important parametric performance information, such as cold neutron brightness down the beam tube and the various component heat loads, that have been used to develop the reference cold source concept.

Materials Research Using Cold Neutrons At Pulsed Neutron Sources

Materials Research Using Cold Neutrons At Pulsed Neutron Sources PDF Author: Chun Keung Loong
Publisher: World Scientific
ISBN: 9814544035
Category : Science
Languages : en
Pages : 245

Get Book Here

Book Description
The applications of the use of cold neutrons for condensed matter research at accelerator-based spallation sources are less well-known than that of the use of cold neutrons at reactor sources. This book represents the outcome of the first international workshop on “Materials Research Using Cold Neutrons at Pulsed Sources”. It consists of overviews of the present status and future trends in research opportunities using cold neutrons, as well as topical papers focusing on the areas of small-angle neutron scattering, reflectivity and spectroscopic studies of a rich variety of materials, from adsorbed molecules to thin films to coal to metallic glasses. These papers will benefit researchers who are interested in the characterization of microscopic properties of advanced materials.

Design of a Cold Neutron Source

Design of a Cold Neutron Source PDF Author: Edward Adelson
Publisher:
ISBN:
Category : Neutrons
Languages : en
Pages : 152

Get Book Here

Book Description


Cold Neutron Sources: Practical Considerations and Modern Research

Cold Neutron Sources: Practical Considerations and Modern Research PDF Author: International Atomic Energy Agency
Publisher: International Atomic Energy Agency
ISBN: 9789201394231
Category : Technology & Engineering
Languages : en
Pages : 0

Get Book Here

Book Description
This Safety Report provides guidance, targeted towards States newly embarking upon a nuclear power plant programme, on the licensing process and associated procedures needed during for the construction, commissioning and operation stages of a nuclear power plant, so that the applicant complies with national regulations in line with the internationally recognized safety principles and requirements throughout these stages. The publication elaborates on the generic guidance provided in IAEA Safety Standards Series No. SSG-12, Licensing Process for Nuclear Installations, and gives supplementary practical guidance for nuclear power plants.

Design of a Cold Neutron Source for the MIT Reactor

Design of a Cold Neutron Source for the MIT Reactor PDF Author: Robert Charles Sanders
Publisher:
ISBN:
Category : Cold neutrons
Languages : en
Pages : 424

Get Book Here

Book Description


Advanced Neutron Source

Advanced Neutron Source PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 504

Get Book Here

Book Description
The Advanced Neutron Source will be a new world-class facility for research using hot, thermal, cold, and ultra-cold neutrons. The heart of the facility will be a 330-MW (fission), heavy-water cooled and heavy-water moderated reactor. The reactor will be housed in a central reactor building, with supporting equipment located in an adjoining reactor support building. An array of cold neutron guides will fan out into a large guide hall, housing about 30 neutron research stations. Appropriate office, laboratory, and shop facilities will be included to provide a complete facility for users. The ANS is scheduled to begin operation at the Oak Ridge National Laboratory early in the next decade. This PDR document defines the plant-level requirements for the design, construction, and operation of ANS. It also defines and provides input to the individual System Design Description (SDD) documents. Together, this PDR document and the set of SDD documents will define and control the baseline configuration of ANS.

Advanced Neutron Source

Advanced Neutron Source PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 504

Get Book Here

Book Description
The Advanced Neutron Source will be a new world-class facility for research using hot, thermal, cold, and ultra-cold neutrons. The heart of the facility will be a 330-MW (fission), heavy-water cooled and heavy-water moderated reactor. The reactor will be housed in a central reactor building, with supporting equipment located in an adjoining reactor support building. An array of cold neutron guides will fan out into a large guide hall, housing about 30 neutron research stations. Appropriate office, laboratory, and shop facilities will be included to provide a complete facility for users. The ANS is scheduled to begin operation at the Oak Ridge National Laboratory early in the next decade. This PDR document defines the plant-level requirements for the design, construction, and operation of ANS. It also defines and provides input to the individual System Design Description (SDD) documents. Together, this PDR document and the set of SDD documents will define and control the baseline configuration of ANS.

The Design and Construction of a Cold Neutron Source for Use in the Cornell University Triga Reactor

The Design and Construction of a Cold Neutron Source for Use in the Cornell University Triga Reactor PDF Author: Lydia Jane Young
Publisher:
ISBN:
Category : Neutron sources
Languages : en
Pages : 282

Get Book Here

Book Description


Design of a Cold Neutron Source for the MITR--a Follow-up Study

Design of a Cold Neutron Source for the MITR--a Follow-up Study PDF Author: Ronald Joseph Chin
Publisher:
ISBN:
Category :
Languages : en
Pages : 296

Get Book Here

Book Description