Optimization of Industrial Unit Processes

Optimization of Industrial Unit Processes PDF Author: Bela G. Liptak
Publisher: CRC Press
ISBN: 0429611692
Category : Technology & Engineering
Languages : en
Pages : 431

Get Book Here

Book Description
In Optimization of Industrial Unit Processes, the term "optimization" means the maximizing of productivity and safety while minimizing operating costs. In a fully optimized plant, efficiency and productivity are continuously maximized while levels, temperatures, pressures, or flows float within their allowable limits. This control philosophy differs from earlier approaches - where levels and temperatures were controlled at constant values, and plant productivity was only an accidental, uncontrolled consequence of those controlled variables. With this approach, the sides of a multivariable control envelope are the various constraints while inside the envelope the process is continuously moved to maximize efficiency and productivity. Because one must understand a process before one can control it (let alone optimize it), Optimization of Industrial Unit Processes discusses the "personality" and characteristics of each process in term of its time constants, gains, and other unique features. This book provides information for engineers who design or operate industrial plants and who seek to increase the profitability of their plants. It recognizes that all industrial processes involve operations such as material transportation, heat transfer, and reactions. Therefore each plant consists of a combination of basic unit operations and can be optimized by maximizing the efficiency, and minimizing the operating cost, of the individual unit operations from which it is composed. Optimization of Industrial Unit Processes discusses real world processes - where pipes leak, sensors plug, and pumps cavitate - offering practical solutions to real problems. Each control system described in the book works, illustrating the state of the art in controlling a particular unit operation. This second edition reflects the continual improvement and evolution of control systems as well as anticipates future advances. Bela G. Liptak speaks on Post-Oil Energy Technology on the AT&T Tech Channel.

Optimization of Industrial Unit Processes

Optimization of Industrial Unit Processes PDF Author: Bela G. Liptak
Publisher: CRC Press
ISBN: 0429611692
Category : Technology & Engineering
Languages : en
Pages : 431

Get Book Here

Book Description
In Optimization of Industrial Unit Processes, the term "optimization" means the maximizing of productivity and safety while minimizing operating costs. In a fully optimized plant, efficiency and productivity are continuously maximized while levels, temperatures, pressures, or flows float within their allowable limits. This control philosophy differs from earlier approaches - where levels and temperatures were controlled at constant values, and plant productivity was only an accidental, uncontrolled consequence of those controlled variables. With this approach, the sides of a multivariable control envelope are the various constraints while inside the envelope the process is continuously moved to maximize efficiency and productivity. Because one must understand a process before one can control it (let alone optimize it), Optimization of Industrial Unit Processes discusses the "personality" and characteristics of each process in term of its time constants, gains, and other unique features. This book provides information for engineers who design or operate industrial plants and who seek to increase the profitability of their plants. It recognizes that all industrial processes involve operations such as material transportation, heat transfer, and reactions. Therefore each plant consists of a combination of basic unit operations and can be optimized by maximizing the efficiency, and minimizing the operating cost, of the individual unit operations from which it is composed. Optimization of Industrial Unit Processes discusses real world processes - where pipes leak, sensors plug, and pumps cavitate - offering practical solutions to real problems. Each control system described in the book works, illustrating the state of the art in controlling a particular unit operation. This second edition reflects the continual improvement and evolution of control systems as well as anticipates future advances. Bela G. Liptak speaks on Post-Oil Energy Technology on the AT&T Tech Channel.

Optimization of Industrial Unit Processes, Second Edition

Optimization of Industrial Unit Processes, Second Edition PDF Author: Bela G. Liptak
Publisher: CRC Press
ISBN: 9780849398735
Category : Technology & Engineering
Languages : en
Pages : 440

Get Book Here

Book Description
In Optimization of Industrial Unit Processes, the term "optimization" means the maximizing of productivity and safety while minimizing operating costs. In a fully optimized plant, efficiency and productivity are continuously maximized while levels, temperatures, pressures, or flows float within their allowable limits. This control philosophy differs from earlier approaches - where levels and temperatures were controlled at constant values, and plant productivity was only an accidental, uncontrolled consequence of those controlled variables. With this approach, the sides of a multivariable control envelope are the various constraints while inside the envelope the process is continuously moved to maximize efficiency and productivity. Because one must understand a process before one can control it (let alone optimize it), Optimization of Industrial Unit Processes discusses the "personality" and characteristics of each process in term of its time constants, gains, and other unique features. This book provides information for engineers who design or operate industrial plants and who seek to increase the profitability of their plants. It recognizes that all industrial processes involve operations such as material transportation, heat transfer, and reactions. Therefore each plant consists of a combination of basic unit operations and can be optimized by maximizing the efficiency, and minimizing the operating cost, of the individual unit operations from which it is composed. Optimization of Industrial Unit Processes discusses real world processes - where pipes leak, sensors plug, and pumps cavitate - offering practical solutions to real problems. Each control system described in the book works, illustrating the state of the art in controlling a particular unit operation. This second edition reflects the continual improvement and evolution of control systems as well as anticipates future advances. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.

Measurement and Safety

Measurement and Safety PDF Author: Béla G. Lipták
Publisher: CRC Press
ISBN: 1498727662
Category : Science
Languages : en
Pages : 2226

Get Book Here

Book Description
This handbook is dedicated to the next generation of automation engineers working in the fields of measurement, control, and safety, describing the sensors and detectors used in the measurement of process variables.

Instrument and Automation Engineers' Handbook

Instrument and Automation Engineers' Handbook PDF Author: Bela G. Liptak
Publisher: CRC Press
ISBN: 1000820629
Category : Technology & Engineering
Languages : en
Pages : 3560

Get Book Here

Book Description
The Instrument and Automation Engineers’ Handbook (IAEH) is the Number 1 process automation handbook in the world. The two volumes in this greatly expanded Fifth Edition deal with measurement devices and analyzers. Volume one, Measurement and Safety, covers safety sensors and the detectors of physical properties, while volume two, Analysis and Analysis, describes the measurement of such analytical properties as composition. Complete with 245 alphabetized chapters and a thorough index for quick access to specific information, the IAEH, Fifth Edition is a must-have reference for instrument and automation engineers working in the chemical, oil/gas, pharmaceutical, pollution, energy, plastics, paper, wastewater, food, etc. industries.

Industrial Heat Pump-Assisted Wood Drying

Industrial Heat Pump-Assisted Wood Drying PDF Author: Vasile Minea
Publisher: CRC Press
ISBN: 0429874057
Category : Science
Languages : en
Pages : 1079

Get Book Here

Book Description
This book discusses conventional as well as unconventional wood drying technologies. It covers fundamental thermophysical and energetic aspects and integrates two complex thermodynamic systems, conventional kilns and heat pumps, aimed at improving the energy performance of dryers and the final quality of dried lumber. It discusses advanced components, kiln energy requirements, modeling, and software and emphasizes dryer/heat pump optimum coupling, control, and energy efficiency. Problems are included in most chapters as practical, numerical examples for process and system/components calculation and design. The book presents promising advancements and R&D challenges and future requirements.

Handbook of Industrial Drying, Fourth Edition

Handbook of Industrial Drying, Fourth Edition PDF Author: Arun S. Mujumdar
Publisher: CRC Press
ISBN: 1466596651
Category : Technology & Engineering
Languages : en
Pages : 1350

Get Book Here

Book Description
By far the most commonly encountered and energy-intensive unit operation in almost all industrial sectors, industrial drying continues to attract the interest of scientists, researchers, and engineers. The Handbook of Industrial Drying, Fourth Edition not only delivers a comprehensive treatment of the current state of the art, but also serves as a consultative reference for streamlining industrial drying operations. New to the Fourth Edition: Computational fluid dynamic simulation Solar, impingement, and pulse combustion drying Drying of fruits, vegetables, sugar, biomass, and coal Physicochemical aspects of sludge drying Life-cycle assessment of drying systems Covering commonly encountered dryers as well as innovative dryers with future potential, the Handbook of Industrial Drying, Fourth Edition not only details the latest developments in the field, but also explains how improvements in dryer design and operation can increase energy efficiency and cost-effectiveness.

Optimization of Industrial Unit Processes

Optimization of Industrial Unit Processes PDF Author: Bela G. Liptak
Publisher: CRC Press
ISBN: 0429606176
Category : Technology & Engineering
Languages : en
Pages : 440

Get Book Here

Book Description
In Optimization of Industrial Unit Processes, the term "optimization" means the maximizing of productivity and safety while minimizing operating costs. In a fully optimized plant, efficiency and productivity are continuously maximized while levels, temperatures, pressures, or flows float within their allowable limits. This control philosophy differs from earlier approaches - where levels and temperatures were controlled at constant values, and plant productivity was only an accidental, uncontrolled consequence of those controlled variables. With this approach, the sides of a multivariable control envelope are the various constraints while inside the envelope the process is continuously moved to maximize efficiency and productivity. Because one must understand a process before one can control it (let alone optimize it), Optimization of Industrial Unit Processes discusses the "personality" and characteristics of each process in term of its time constants, gains, and other unique features. This book provides information for engineers who design or operate industrial plants and who seek to increase the profitability of their plants. It recognizes that all industrial processes involve operations such as material transportation, heat transfer, and reactions. Therefore each plant consists of a combination of basic unit operations and can be optimized by maximizing the efficiency, and minimizing the operating cost, of the individual unit operations from which it is composed. Optimization of Industrial Unit Processes discusses real world processes - where pipes leak, sensors plug, and pumps cavitate - offering practical solutions to real problems. Each control system described in the book works, illustrating the state of the art in controlling a particular unit operation. This second edition reflects the continual improvement and evolution of control systems as well as anticipates future advances. Bela G. Liptak speaks on Post-Oil Energy Technology on the AT&T Tech Channel.

Improving Compressed Air System Performance

Improving Compressed Air System Performance PDF Author:
Publisher: U.S. Department of Energy
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 128

Get Book Here

Book Description


Optimization of Unit Operations

Optimization of Unit Operations PDF Author: Bela G. Liptak
Publisher: CRC Press
ISBN: 1000110044
Category : Technology & Engineering
Languages : en
Pages : 431

Get Book Here

Book Description
This comprehensive book examines the technology and practical applications of plant multivariable envelope control. Optimize plant productivity, including air handlers, boilers, chemical reactors, chillers, clean-rooms, compressors and fans, cooling towers, heat exchangers, and pumping stations. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.

Introduction to Software for Chemical Engineers, Second Edition

Introduction to Software for Chemical Engineers, Second Edition PDF Author: Mariano Martín Martín
Publisher: CRC Press
ISBN: 0429835426
Category : Computers
Languages : en
Pages : 959

Get Book Here

Book Description
The field of Chemical Engineering and its link to computer science is in constant evolution and new engineers have a variety of tools at their disposal to tackle their everyday problems. Introduction to Software for Chemical Engineers, Second Edition provides a quick guide to the use of various computer packages for chemical engineering applications. It covers a range of software applications from Excel and general mathematical packages such as MATLAB and MathCAD to process simulators, CHEMCAD and ASPEN, equation-based modeling languages, gProms, optimization software such as GAMS and AIMS, and specialized software like CFD or DEM codes. The different packages are introduced and applied to solve typical problems in fluid mechanics, heat and mass transfer, mass and energy balances, unit operations, reactor engineering, process and equipment design and control. This new edition offers a wider view of packages including open source software such as R, Python and Julia. It also includes complete examples in ASPEN Plus, adds ANSYS Fluent to CFD codes, Lingo to the optimization packages, and discusses Engineering Equation Solver. It offers a global idea of the capabilities of the software used in the chemical engineering field and provides examples for solving real-world problems. Written by leading experts, this book is a must-have reference for chemical engineers looking to grow in their careers through the use of new and improving computer software. Its user-friendly approach to simulation and optimization as well as its example-based presentation of the software, makes it a perfect teaching tool for both undergraduate and master levels.