Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 202
Book Description
This report describes the work conducted on a program to optimize the hardware and software of a computer automated ultrasonic inspection system which was developed under a previous Air Force Contract F33615-72-C-1828. The hardware modifications included improvements of the scan drive mechanism to increase inspection speed and development of improved ultrasonic circuitry to perform zone scanning inspections. Software developments included: (1) implementation of the zone scanning inspection method, (2) programs for signal processing to enhance random flaw detection, and (3) development of a Computer Aided Design Data Control (CADDC) method to interface the inspection system with data generated by Computer Aided Design (CAD) approach to component design.
Optimization of Computer Automated Ultrasonic Inspection System. For Complex Air-Frame Components
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 202
Book Description
This report describes the work conducted on a program to optimize the hardware and software of a computer automated ultrasonic inspection system which was developed under a previous Air Force Contract F33615-72-C-1828. The hardware modifications included improvements of the scan drive mechanism to increase inspection speed and development of improved ultrasonic circuitry to perform zone scanning inspections. Software developments included: (1) implementation of the zone scanning inspection method, (2) programs for signal processing to enhance random flaw detection, and (3) development of a Computer Aided Design Data Control (CADDC) method to interface the inspection system with data generated by Computer Aided Design (CAD) approach to component design.
Publisher:
ISBN:
Category :
Languages : en
Pages : 202
Book Description
This report describes the work conducted on a program to optimize the hardware and software of a computer automated ultrasonic inspection system which was developed under a previous Air Force Contract F33615-72-C-1828. The hardware modifications included improvements of the scan drive mechanism to increase inspection speed and development of improved ultrasonic circuitry to perform zone scanning inspections. Software developments included: (1) implementation of the zone scanning inspection method, (2) programs for signal processing to enhance random flaw detection, and (3) development of a Computer Aided Design Data Control (CADDC) method to interface the inspection system with data generated by Computer Aided Design (CAD) approach to component design.
Optimization of Computer Automated Ultrasonic Inspection System
Author: Bill G. W. Yee
Publisher:
ISBN:
Category :
Languages : en
Pages : 180
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 180
Book Description
Computer-automated Ultrasonic Inspection System for Aircraft Forgings
Author: B. G. W. Yee
Publisher:
ISBN:
Category : Nondestructive testing
Languages : en
Pages : 120
Book Description
The work includes the preliminary design of the overall system operation shown by block diagrams of the subsystem functions and operations and timing diagrams for the three modes of ultrasonic inspection: reflection, transmission, and Delta-Scan. Progress to date includes the completion of the design of the X-Y scanner, the purchase of a 4 x 6 x 3-ft tank, and the purchase of the mechanical components, electromechanical controls, and displays necessary for the fabrication of an X-Y scanner capable of operating in the manual or computer controlled mode. The design for the gimbal control is essentially complete with some of the components already in fabrication. A Convair-owned Automation Model UM 771 reflectoscope has been modified to accept programmable gain control from the computer. The electronic circuitries for the gating and computer interfacing have been designed and several have been fabricated. (Modified author abstract)
Publisher:
ISBN:
Category : Nondestructive testing
Languages : en
Pages : 120
Book Description
The work includes the preliminary design of the overall system operation shown by block diagrams of the subsystem functions and operations and timing diagrams for the three modes of ultrasonic inspection: reflection, transmission, and Delta-Scan. Progress to date includes the completion of the design of the X-Y scanner, the purchase of a 4 x 6 x 3-ft tank, and the purchase of the mechanical components, electromechanical controls, and displays necessary for the fabrication of an X-Y scanner capable of operating in the manual or computer controlled mode. The design for the gimbal control is essentially complete with some of the components already in fabrication. A Convair-owned Automation Model UM 771 reflectoscope has been modified to accept programmable gain control from the computer. The electronic circuitries for the gating and computer interfacing have been designed and several have been fabricated. (Modified author abstract)
Computer-Automated Ultrasonic Inspection System for Aircraft Forging
Author: B. G. W. Yee
Publisher:
ISBN:
Category :
Languages : en
Pages : 210
Book Description
This report describes the work conducted on a program to design, fabricate and evaluate a prototype Computer Automated Ultrasonic Inspection System for inspecting complex aircraft forgings. This report documents the modification required to off-the-shelf ultrasonic equipment to provide all the ultrasonic flaw data for the computer and provide computer control of receiver gain and flaw-gate width. Also the design and fabrication of a multiple flaw gate system is described and evaluated.
Publisher:
ISBN:
Category :
Languages : en
Pages : 210
Book Description
This report describes the work conducted on a program to design, fabricate and evaluate a prototype Computer Automated Ultrasonic Inspection System for inspecting complex aircraft forgings. This report documents the modification required to off-the-shelf ultrasonic equipment to provide all the ultrasonic flaw data for the computer and provide computer control of receiver gain and flaw-gate width. Also the design and fabrication of a multiple flaw gate system is described and evaluated.
Computer Automated Ultrasonic Inspection System
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 155
Book Description
Standard ultrasonic inspection techniques used in industry today can involve tedious manual or semiautomated operations that make them incompatible with high-rate industrial production inspection requirements. But with advanced indigital computer technology and the rapid integration of this technology into both laboratory and production environments, the development of computer-aided ultrasonic inspection has become a reality. By reducing inspection costs through reduced inspection time, decreased inspector interaction, as well as providing more efficient inspection record storage and retrieval, these automated systems are proving their value and indispensability in the manufacturing environment. Computer-automated ultrasonic inspection has the potential to increase inspection reliability, provide permanent inspection records which can be used to track part integrity during the life of the aircraft, and can establish a structured data base for statistical analysis of inspection results.
Publisher:
ISBN:
Category :
Languages : en
Pages : 155
Book Description
Standard ultrasonic inspection techniques used in industry today can involve tedious manual or semiautomated operations that make them incompatible with high-rate industrial production inspection requirements. But with advanced indigital computer technology and the rapid integration of this technology into both laboratory and production environments, the development of computer-aided ultrasonic inspection has become a reality. By reducing inspection costs through reduced inspection time, decreased inspector interaction, as well as providing more efficient inspection record storage and retrieval, these automated systems are proving their value and indispensability in the manufacturing environment. Computer-automated ultrasonic inspection has the potential to increase inspection reliability, provide permanent inspection records which can be used to track part integrity during the life of the aircraft, and can establish a structured data base for statistical analysis of inspection results.
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 994
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 994
Book Description
International Aerospace Abstracts
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 974
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 974
Book Description
Probability of Detection (POD) for Nondestructive Evaluation (NDE)
Author: George A. Matzkanin
Publisher:
ISBN: 9781890596200
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN: 9781890596200
Category :
Languages : en
Pages :
Book Description
NASA SP.
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 654
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 654
Book Description
Automotive Engineering International
Author:
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 1204
Book Description
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 1204
Book Description