Optical, Electrical and Microstructural Properties of Tin Doped Indium Oxide Films Made from Sintered Nanoparticles

Optical, Electrical and Microstructural Properties of Tin Doped Indium Oxide Films Made from Sintered Nanoparticles PDF Author: Annette Hultaker
Publisher:
ISBN:
Category :
Languages : en
Pages : 5

Get Book Here

Book Description
Thin transparent and electrically conductive films of tin doped indium oxide (ITO) were made by sintering of nanoparticle dispersions. The resistivity decreased to 1 - 10(exp -2) Omega cm upon treatment at 800 deg C, while the luminous transmittance remained high. The property evolution was connected with sintering and densification as studied by Scanning Electron Microscopy, X-ray Diffraction, X-ray Fluorescence and Elastic Recoil Detection Analysis.

Optical, Electrical and Microstructural Properties of Tin Doped Indium Oxide Films Made from Sintered Nanoparticles

Optical, Electrical and Microstructural Properties of Tin Doped Indium Oxide Films Made from Sintered Nanoparticles PDF Author: Annette Hultaker
Publisher:
ISBN:
Category :
Languages : en
Pages : 5

Get Book Here

Book Description
Thin transparent and electrically conductive films of tin doped indium oxide (ITO) were made by sintering of nanoparticle dispersions. The resistivity decreased to 1 - 10(exp -2) Omega cm upon treatment at 800 deg C, while the luminous transmittance remained high. The property evolution was connected with sintering and densification as studied by Scanning Electron Microscopy, X-ray Diffraction, X-ray Fluorescence and Elastic Recoil Detection Analysis.

Transparent Conducting Pure and Tin Doped Indium Oxide Films - Preparation and Characterization

Transparent Conducting Pure and Tin Doped Indium Oxide Films - Preparation and Characterization PDF Author: Dr. B. Radhakrishna
Publisher: Lulu.com
ISBN: 0359510280
Category : Education
Languages : en
Pages : 132

Get Book Here

Book Description
Badeker in 1907 observed that some materials are optically transparent in the visible light and electrically conducting [1]. Because of the increasing interest in electrically and electronically active materials, the search for materials and the techniques for producing semi-transparent electrically conducting films have gained much importance. In an intrinsic stoichiometric material, it is not possible to have simultaneously high transparency (>80%%) in the visible region and high electrical conductivity (>103 Ω cm-1). A variety of metals in thin film form (

Nanophase and Nanocomposite Materials IV: Volume 703

Nanophase and Nanocomposite Materials IV: Volume 703 PDF Author: Sridhar Komarneni
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 624

Get Book Here

Book Description
The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.

Preparation and Post-Annealing Effects on the Optical Properties of Indium Tin Oxide Thin Films

Preparation and Post-Annealing Effects on the Optical Properties of Indium Tin Oxide Thin Films PDF Author: Rongxin Wang
Publisher: Open Dissertation Press
ISBN: 9781361207796
Category :
Languages : en
Pages :

Get Book Here

Book Description
This dissertation, "Preparation and Post-annealing Effects on the Optical Properties of Indium Tin Oxide Thin Films" by Rongxin, Wang, 王榮新, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Abstract of thesis entitled PREPARATION AND POST-ANNEALING EFFECTS ON THE OPTICAL PROPERTIES OF INDIUM TIN OXIDE THIN FILMS Submitted by WANG Rong Xin for the degree of Doctor of Philosophy at The University of Hong Kong in April 2005 Many opto-electronic devices, such as III-V compound devices, liquid crystal displays, solar cells, organic and inorganic light emitting devices, and ultraviolet photodetectors, demand transparent electrode materials simultaneously having high electrical conductance. To meet the requirements for particular applications, a great deal of basic research and studies have been carried out on the electrical and optical properties of these materials. As a most promising candidate for such materials, indium tin oxide (ITO) has attracted interest in recent years. Furthermore, ITO has many unique properties such as excellent adhesion on the substrate, thermal stability and ease of patterning. The deposition of high-quality ITO thin films is a key step for successful application of ITO thin films as transparent electrode materials. To obtain optimal electrical and optical properties of ITO films, the growth parameters and conditions must be determined. Moreover, the optical and electrical properties of ITO contact layers, which can either be on the top side or the bottom side of a device, are influenced by various post-deposition treatments. For the present work, ITO thin films were deposited on glass and quartz substrates using e-beam evaporation with different deposition rates. The influence of substrate material, deposition rate, deposition gas environment and post-deposition annealing on the optical properties of the films was investigated in detail. Atomic force microscopy, X-ray diffraction and X-ray photoemission spectroscopy was employed to obtain information on the chemical state and crystallization of the films. Analysis of these data suggests that the substrate material, deposition rate, deposition gas environment and post-deposition annealing conditions strongly affect the chemical composition and the microstructure of the ITO films and these in turn influence the optical properties of the film. Oxygen incorporation transfers the In O phase to the In O phase and removes metallic In to form both indium oxide 2 3-x 2 3 phases. Both of these reactions are beneficial for the optical transmittance of ITO thin films. Moreover, it was found that the incorporation and decomposition reactions of oxygen can be controlled so as to change the optical properties of the ITO thin films reversibly. DOI: 10.5353/th_b3154617 Subjects: Thin films - Optical properties Indium compounds Annealing of metals

Optical and Electrical Properties of Indium Tin Oxide Films

Optical and Electrical Properties of Indium Tin Oxide Films PDF Author: Dennis V. Savitskij
Publisher:
ISBN:
Category : Semiconductors
Languages : en
Pages : 110

Get Book Here

Book Description


Nanophase and Nanocomposite Materials

Nanophase and Nanocomposite Materials PDF Author:
Publisher:
ISBN:
Category : Composite materials
Languages : en
Pages : 624

Get Book Here

Book Description


Optical and Mechanical Properties of Thin Films of Indium Oxide Doped with Tin

Optical and Mechanical Properties of Thin Films of Indium Oxide Doped with Tin PDF Author: V. Stetsenko
Publisher:
ISBN:
Category :
Languages : en
Pages : 5

Get Book Here

Book Description


Optical and Electrical Properties of Indium Tin Oxide Films Near Their Laser Damage Threshold [Electrical and Optical Properties of Indium Tin Oxide Films Under Multi-pulse Laser Irradiation at 1064 Nm].

Optical and Electrical Properties of Indium Tin Oxide Films Near Their Laser Damage Threshold [Electrical and Optical Properties of Indium Tin Oxide Films Under Multi-pulse Laser Irradiation at 1064 Nm]. PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 10

Get Book Here

Book Description
In this paper, we investigated whether the optical and electrical properties of indium tin oxide (ITO) films are degraded under laser irradiation below their laser ablation threshold. While performing multi-pulse laser damage experiments on a single ITO film (4.7 ns, 1064 nm, 10 Hz), we examined the optical and electrical properties in situ. A decrease in reflectance was observed prior to laser damage initiation. However, under sub-damage threshold irradiation, conductivity and reflectance of the film were maintained without measurable degradation. This indicates that ITO films in optoelectronic devices may be operated below their lifetime laser damage threshold without noticeable performance degradation.

Optical and Electrical Properties of Indium Oxide Thin Films Prepared by a Pyrolitic Method

Optical and Electrical Properties of Indium Oxide Thin Films Prepared by a Pyrolitic Method PDF Author: Ibrahim Abu Talib
Publisher:
ISBN:
Category : Films
Languages : en
Pages : 7

Get Book Here

Book Description
Indium oxide thin films have been prepared by a pyrolitic method in which solution of 1 mol/litre indium (111) chloride in butylacetate has been sprayed onto a heated substrate of glass, using nitrogen as the carrier gas. The films show variation in the optical transmission and electrical sheet resistance with substrate temperature. A sheet resistance greater than 173 / and an average optical transmission in the visible range exceeding 80% were obtained. [Authors' abstract].

Structural, Electrical and Optical Characterization of Indium Tin Oxide Films After Degradation Under Various Conditions

Structural, Electrical and Optical Characterization of Indium Tin Oxide Films After Degradation Under Various Conditions PDF Author: Meizhen Gao
Publisher:
ISBN:
Category :
Languages : en
Pages : 119

Get Book Here

Book Description