National Program for Inspection of Non-Federal Dams. Stub Pond Dam (CT 00265), Connecticut River Basin, Avon, Connecticut. Phase I Inspection Report PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download National Program for Inspection of Non-Federal Dams. Stub Pond Dam (CT 00265), Connecticut River Basin, Avon, Connecticut. Phase I Inspection Report PDF full book. Access full book title National Program for Inspection of Non-Federal Dams. Stub Pond Dam (CT 00265), Connecticut River Basin, Avon, Connecticut. Phase I Inspection Report by CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.. Download full books in PDF and EPUB format.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 91
Get Book Here
Book Description
This dam consists of an earth embankment, and a concrete wall which extends from the embankments to the spillway on each end of the spillway. The earth embankment is 500 feet long, 8 feet wide at the top and 6.7 feet high, with a downstream slope of 2H:1V. The concrete spillway is located at the western end of the dam and is 40 feet long with 15 inch high permanently attached timber flashboards. Based on the visual inspection, and past operational performance, the dam is judged to be in POOR condition. There are large trees growing on the embankment. The concrete wall is severely cracked and spalled and has been exposed on the downstream side by erosion. Seepage is occurring through the wall and all along the downstream toe of the embankment. The test flood for this dam is the 100 year flood. The test flood has an inflow equal to 1810 cfs and an outflow discharge equal to 1800 cfs at a stillwater elevation of 233.1 which will overtop the dam by 1.0 foot. The maximum outflow capacity of the spillway with the water level at the top of the dam is 53 cfs, which is 3 percent of the test flood outflow.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 91
Get Book Here
Book Description
This dam consists of an earth embankment, and a concrete wall which extends from the embankments to the spillway on each end of the spillway. The earth embankment is 500 feet long, 8 feet wide at the top and 6.7 feet high, with a downstream slope of 2H:1V. The concrete spillway is located at the western end of the dam and is 40 feet long with 15 inch high permanently attached timber flashboards. Based on the visual inspection, and past operational performance, the dam is judged to be in POOR condition. There are large trees growing on the embankment. The concrete wall is severely cracked and spalled and has been exposed on the downstream side by erosion. Seepage is occurring through the wall and all along the downstream toe of the embankment. The test flood for this dam is the 100 year flood. The test flood has an inflow equal to 1810 cfs and an outflow discharge equal to 1800 cfs at a stillwater elevation of 233.1 which will overtop the dam by 1.0 foot. The maximum outflow capacity of the spillway with the water level at the top of the dam is 53 cfs, which is 3 percent of the test flood outflow.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 78
Get Book Here
Book Description
Upper Pond Dam is an earth embankment dam with a maximum height of 17 feet and a length of 390 feet. The dam embankment left of the spillway is approximately 10 feet in width, with 2 horizontal to 1 vertical upstream and downstream embankment slopes. The centrally located spillway is 72 feet in length and is a stone masonry structure. Stone masonry training walls approximately 5 feet in height are located at each side of the spillway. The outlet works consist of a concrete gate structure and an outlet channel. Based on the visual inspection, the Upper Pond Dam appears to be in poor condition. There was no movement or settlement of the crest observed. The horizontal alignment is good. The top of the outlet gate structure, however, is lower than the embankment crest. Some erosion was noted at the abutments, adjacent to the spillway section and adjacent to the outlet works. Trespassing on the slopes was not significant. Erosion scarps on the upstream slope extending 1-2 feet above waterline were noted. Several areas of broad shallow erosion on the upstream slope and upstream side of abutments were observed. Brush and many large trees (up to 2.5-ft.-dia.) with extensive root systems were noted on the slopes and crest of the dam. Standing water was observed in an area 35 feet downstream of the toe on the right side of the dam. The capacity of the spillway is inadequate to pass the 1/2 PMF test flood outflow of 5,195 CFS and would overtop the dam by about 0.9 feet. The spillway can pass about 33 percent of the test flood.
Author:
Publisher:
ISBN:
Category : Government reports announcements & index
Languages : en
Pages : 1316
Get Book Here
Book Description
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 102
Get Book Here
Book Description
The dam consists of a 400 foot long concrete spillway across the Farmington River with an adjacent hydroelectric generating powerhouse, and a 100 foot long butressed concrete transition dam spanning from the 70 foot long powerhouse to a 1050 foot long earth dike running along the pond shoreline. There are two low level sluices through the spillway section which are operated by hydraulic lifts in a chamber above the sluices. The sluices have an inlet elevation approximately 44.5 feet below the crest of the spillway. The 4 inlets to the turbines are approximately 34.5 feet below the crest of the spillway; the discharge flows to a tailrace channel cut into bedrock to the left of the spillway discharge channel. A fish ladder with an inlet about 1.5 feet below the spillway crest also discharges into the tailrace channel. All inlet gates are well maintained and operable. Based upon the visual inspection and past performance, the dam is judged to be in fair condition. No evidence of instability was observed in the dam or its appurtenances. The condition of the earth dike is good, however there are areas requiring attention. Based upon our hydraulics computations, the spillway capacity is 101,000 (cfs), which is equivalent to 51% of the routed Test Flood outflow.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 34
Get Book Here
Book Description
Moulsons Pond Dam is a stone masonry dam approximately 80 feet long and 23 feet high. The spillway is L shaped with a concrete cap that extends almost the total length of the dam. A bridge spans over the river immediately downstream of the spillway. The top of road is the dam crest and the west bridge abutment is the west spillway abutment. There is a 2-foot high concrete abutment at the east end that is 8 feet below the top of the dam. At the west end of the dam there is a 6-foot diameter pipe that passes beneath the roadway into a sluiceway that goes to an old mill. There is no control for this sluiceway which is always open and the water discharges into the downstream channel. There is no low-level discharge pipe.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 75
Get Book Here
Book Description
The project, substantially reconstructed in 1967, has a total length of approximately 320 feet, consisting of an approximately 300 foot long embankment and a 20 foot long concrete spillway. The dam is approximately 23.5 feet in height above the streambed of Long Hill Brook and, with the pond level to the top of the dam, impounds approximately 250 acre-feet of water. The upstream slope is protected to the top of the dam by dumped rock riprap. The spillway is a concrete chute and is located near the right end of the dam. The low-level outlet facility is a 24 inch reinforced concrete pipe at the central portion of the embankment and is controlled from a concrete gatehouse on the dam. Based upon visual inspection and past performance, the project is judged to be in fair condition. No evidence of instability of the embankment or spillway was observed. However, there are items which require monitoring and/or maintenance, such as erosion of the spillway discharge channel and a stagnant water condition in the low-level outlet channel which does not allow a free flow of water from the toe drain pipes. Peak inflow to the reservoir at the 1/2 PMF is 850 cubic feet per second (cfs); peak outflow is 580 cfs with the lowest point along the top of the dam overtopped by 0.4 feet. The spillway capacity, with the reservoir level to the low point of the top of the dam, is 380 cfs, which is equivalent to 66% of the routed test flood outflow.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 67
Get Book Here
Book Description
The drainage area is 2.0 square miles and the reservoir has 825 acre-feet of storage capacity. The assessment of the dam is based on a visual inspection, past operational performance and hydraulic/hydrologic computations. The dam is judged to be in FAIR condition with several areas that require attention. These areas include seepage through the dam in the vicinity of the low-level discharge pipes and wet spots along the toe of the dam, vegetation on the embankments as well as along the toe of the dam and the inoperable status of the low-level discharge pipe. The test flood outflow will not overtop the dam and will leave 0.4 feet of freeboard.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 56
Get Book Here
Book Description
Mill Pond Dam is an earth-covered, irregular natural rock formation 600 ft. long, with a top width varying from 10 to 20 ft. and a maximum height of 19 ft. The outlet for the dam is a natural rock weir spillway approximately 35 ft. wide, which is overpassed by a footbridge. The crest of the spillway is about 3 ft. below the lowest point on the dam crest. Based on visual inspection, the Mill Pond Dam is judged to be in good condition; however, during the inspection, there was a light snow cover of approximately 2 inches which may have obscured problems, such as erosion or seepage. A test flood of a 100 year frequency was selected in accordance with the Corps of Engineers' Guidelines. The calculated test flood inflow of 1,000 cfs results in a routed outflow of 990 cfs. With the water level at the top of the dam the spillway capacity is 575 cfs which is 58% of the outflow flood. The storage capacity of the Mill Pond is 52 ac.-ft. at the top of the dam.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 68
Get Book Here
Book Description
Black Pond Dam is a stone masonry and earth embankment structure approximately 100 feet long and 26 feet high with a 25-foot wide paved road (Birdsey Avenue) on the crest. A majority of the downstream embankment consists of a vertical stone masonry face. The 14-foot wide spillway is a 14-foot by 3-foot concrete culvert under the road at approximately the center of the dam. There is a mortared stone gate inlet structure that controls a 20-inch cast iron water main that passes through the base of the dam. The water main connects into the City's distribution network, and is used only for emergencies. There is no low-level discharge. The pond is presently used for recreation. The drainage area is 1.2 square miles and the reservoir has approximately 353 acre-feet of storage capacity. The assessment of the dam is based on the visual inspection, past operational performance and hydraulic/hydrologic computations. The dam is judged to be in fair condition with several areas that require attention. These areas include seepage through the dam, missing mortar in the downstream face, trees on the embankments as well as along the toe of the dam and the lack of a low-level discharge pipe. The test flood for this dam is 1/2 the PMF and is calculated to be 560 cfs. The spillway capacity at the top of the dam is 250 or 45 percent of the test flood outflow. The test flood outflow will overtop the dam by 1.1 feet.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 31
Get Book Here
Book Description
Upper Mill Pond Dam is a stone masonry dam approximately 100 feet long and 15 feet high. The spillway is 92 feet long, 9 feet wide and consists of a masonry broad crested weir. The water level is at the spillway crest and can be lowered by opening the low-level discharge gate which was recently made operable by the Middletown Water Department. In general, the overall condition of the dam is FAIR. The structural stability of the dam is good as evidenced by its vertical, horizontal and lateral alignment. The stone masonry is in good condition although moss and weeds are growing from the joints. The spillway weir and east abutment are in good condition. The west abutment is badly spalled at its base. The discharge gate inlet structure is badly spalled and the bar rack is cluttered with debris. There is some seepage at the east end of the dam where the stone masonry meets the abutment/ledge interface. Vegetation is growing around this area as well. The ledge continues along the downstream channel bank and there is minor seepage. A drainage pipe outlets above the west abutment. There is presently a scour hole at this location. This scour hole has caused the last section of the drainage pipe to collapse into the hole and is undermining the west spillway abutment. At the spillway elevation, the water surface area and storage capacity is 5 acres and 31 acre-feet respectively. The spillway capacity when the water level in the pond is at the top of the dam is 250 cfs. The test flood will overtop the dam by 1.8 feet.
