Measurements of Flows in the DIII-D Divertor by Mach Probes PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Measurements of Flows in the DIII-D Divertor by Mach Probes PDF full book. Access full book title Measurements of Flows in the DIII-D Divertor by Mach Probes by . Download full books in PDF and EPUB format.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 16
Get Book Here
Book Description
First measurements of Mach number of background plasma in the DIII-D divertor are presented in conjunction with temperature T{sub e} and density n{sub e} using a fast scanning probe array. To validate the probe measurements, the authors compared the T{sub e}, n{sub e} and J{sub sat} data to Thomson scattering data and find good overall agreement in attached discharges and some discrepancy for T{sub e} and n{sub e} in detached discharges. The discrepancy is mostly due to the effect of large fluctuations present during detached plasmas on the probe characteristic; the particle flux is accurately measured in every case. A composite 2-D map of measured flows is presented for an ELMing H-mode discharge and they focus on some of the details. They have also documented the temperature, density and Mach number in the private flux region of the divertor and the vicinity of the X-point, which are important transition regions that have been little studied or modeled. Background parallel plasma flows and electric fields in the divertor region show a complex structure.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 16
Get Book Here
Book Description
First measurements of Mach number of background plasma in the DIII-D divertor are presented in conjunction with temperature T{sub e} and density n{sub e} using a fast scanning probe array. To validate the probe measurements, the authors compared the T{sub e}, n{sub e} and J{sub sat} data to Thomson scattering data and find good overall agreement in attached discharges and some discrepancy for T{sub e} and n{sub e} in detached discharges. The discrepancy is mostly due to the effect of large fluctuations present during detached plasmas on the probe characteristic; the particle flux is accurately measured in every case. A composite 2-D map of measured flows is presented for an ELMing H-mode discharge and they focus on some of the details. They have also documented the temperature, density and Mach number in the private flux region of the divertor and the vicinity of the X-point, which are important transition regions that have been little studied or modeled. Background parallel plasma flows and electric fields in the divertor region show a complex structure.
Author: Peter E. Stott
Publisher: Springer Science & Business Media
ISBN: 1441986960
Category : Science
Languages : en
Pages : 449
Get Book Here
Book Description
Proceedings of the International Conference on Advanced Diagnostics for Magnetic and Inertial Fusion, held September 3-7, 2001 at Villa Monastero, Varenna, Italy. This volume focuses on future diagnostic requirements for fusion energy research emphasizing advanced diagnostics, new techniques and areas where further progress is required.
Author: Cedric Kar-Wai Tsui
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 6
Get Book Here
Book Description
The scrape-off layer (SOL) and divertor plasma in the DEEI-D tokamak has been modeled using the 2-D fluid code UEDGE. The resulting simulated plasmas are compared in detail with the numerous diagnostics available on the device. Good agreement is obtained between the experimental measurements and the simulations when relatively small values of the assumed anomalous perpendicular transport coefficients are used. We use a purely diffusive model for perpendicular transport, with transport coefficients which are constant in space. The value of each of these transport coefficients is varied in the simulation to match the measured upstream density and temperature profiles. The resulting plasma parameters are then compared with all other diagnostics which measure parameters at various poloidal locations in the SOL.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 20
Get Book Here
Book Description
Impurity ion temperatures and parallel flow velocities in the DIII-D divertor have been measured from the shapes and shifts of visible spectral lines of C II, C III, and B II. Spectral multiplet patterns are analyzed by fitting them to theoretical profiles that incorporate exact calculations for the Zeeman/Paschen-Back effect. Ion temperatures range from 4--20 eV. Both normal flows toward the target plate and reversed flows away from the target plate are observed in the outer divertor leg; only flows toward the plate are detected in the inner leg.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 20
Get Book Here
Book Description
A new reciprocating Langmuir probe has been used to measure density and temperature profiles, ion flow, and potential fluctuation levels from the lower divertor floor up to the X-point on the DIII-D tokamak. This probe is designed to make fast (2 kHz swept, 20 kHz Mach, 500 kHz Vfloat) measurements with 2 mm spatial resolution in the region where the largest gradients on the plasma open flux tubes are found and therefore provide the best benchmarks for SOL and divertor numerical models. Profiles are constructed using the 300 ms time history of the probe measurements during the 25 cm reciprocating stroke. Both single and double null plasmas can be measured and compared with a 20 Hz divertor Thomson scattering system. The probe head is constructed of four different kinds of graphite to optimize the electrical and thermal characteristics. Electrically insulated pyrolytic graphite rings act as a heat shield to absorb the plasma heat flux on the probe shaft and are mounted on a carbon/carbon composite core for mechanical strength. The Langmuir probe sampling tips are made of a linear carbon fiber composite. The mechanical, electrical, data acquisition and power supply systems design will be described. Initial measurements will also be presented.
Author:
Publisher:
ISBN:
Category : Electronic journals
Languages : en
Pages : 530
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 5
Get Book Here
Book Description
Indications that flows in the divertor can exhibit complex behavior have been obtained from 2-D modeling but so far remain mostly unconfirmed by experiment. An important feature of flow physics is that of flow reversal. Flow reversal has been predicted analytically and it is expected when the ionization source arising from neutral or impurity ionization in the divertor region is large, creating a high pressure zone. Plasma flows arise to equilibrate the pressure. A radiative divertor regime has been proposed in order to reduce the heat and particle fluxes to the divertor target plates. In this regime, the energy and momentum of the plasma are dissipated into neutral gas introduced in the divertor region, cooling the plasma by collisional, radiative and other atomic processes so that the plasma becomes detached from the target plates. These regimes have been the subject of extensive studies in DIII-D to evaluate their energy and particle transport properties, but only recently it has been proposed that the energy transport over large regions of the divertor must be dominated by convection instead of conduction. It is therefore important to understand the role of the plasma conditions and geometry on determining the region of convection-dominated plasma in order to properly control the heat and particle fluxes to the target plates and hence, divertor performance. The authors have observed complex structures in the deuterium ion flows in the DIII-D divertor. Features observed include reverse flow, convective flow over a large volume of the divertor and stagnant flow. They have measured large gradients in the plasma potential across the separatrix in the divertor and determined that these gradients induce poloidal flows that can potentially affect the particle balance in the divertor.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 13
Get Book Here
Book Description
This paper describes divertor density and temperature measurements using both a new reciprocating Langmuir probe (XPT-RCP) which plunges vertically above the divertor floor up to the X-point height and swept, single, Langmuir probes fixed horizontally across the divertor floor. These types of measurements are important for testing models of the SOL and divertor which then are used to design plasma facing components in reactor size tokamaks. This paper presents an overview of the new divertor probe measurements and how they compare with the new divertor Thomson scattering system. The fast time response of the probe measurements allows detailed study of ELMs.
Author: P. Stangeby
Publisher:
ISBN:
Category :
Languages : en
Pages : 8
Get Book Here
Book Description
For some divertor aspects, such as detached plasmas or the private flux zone, it is not clear that the controlling physics has been fully identified. This is a particular concern when the details of the plasma are likely to be important in modeling the problem--for example, modeling co-deposition in detached inner divertors. An empirical method of ''reconstructing'' the plasma based on direct experimental measurements may be useful in such situations. It is shown that a detached plasma in the outer divertor leg of DIII-D can be reconstructed reasonably well using spectroscopic and probe data as input to a simple onion-skin model and the Monte Carlo hydrogenic code, EIRENE. The calculated 2D distributions of n{sub e} and T{sub e} in the detached divertor were compared with direct measurements from the divertor Thomson scattering system, a diagnostic capability unique to DIII-D.
