Author: Tom Proulx
Publisher: Springer Science & Business Media
ISBN: 1461402166
Category : Technology & Engineering
Languages : en
Pages : 455
Book Description
Dynamic Behavior of Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Dynamic Behavior of Materials, Volume 1
Author: Tom Proulx
Publisher: Springer Science & Business Media
ISBN: 1461402166
Category : Technology & Engineering
Languages : en
Pages : 455
Book Description
Dynamic Behavior of Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Publisher: Springer Science & Business Media
ISBN: 1461402166
Category : Technology & Engineering
Languages : en
Pages : 455
Book Description
Dynamic Behavior of Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Energetic Materials
Author: Mark J. Mezger
Publisher: CRC Press
ISBN: 1351681257
Category : Technology & Engineering
Languages : en
Pages : 317
Book Description
This book will take an in-depth look at the technologies, processes, and capabilities to develop and produce "next generation" energetic materials for both commercial and defense applications, including military, mining operations, oil production and well perforation, and construction demolition. It will serve to highlight the critical technologies, latest developments, and the current capability gaps that serve as barriers to military fielding or transition to the commercial marketplace. It will also explain how the processing technologies can be spun out for use in other non-energetics related industries.
Publisher: CRC Press
ISBN: 1351681257
Category : Technology & Engineering
Languages : en
Pages : 317
Book Description
This book will take an in-depth look at the technologies, processes, and capabilities to develop and produce "next generation" energetic materials for both commercial and defense applications, including military, mining operations, oil production and well perforation, and construction demolition. It will serve to highlight the critical technologies, latest developments, and the current capability gaps that serve as barriers to military fielding or transition to the commercial marketplace. It will also explain how the processing technologies can be spun out for use in other non-energetics related industries.
Dynamic Behavior of Materials, Volume 1
Author: Bo Song
Publisher: Springer Science & Business Media
ISBN: 3319007718
Category : Technology & Engineering
Languages : en
Pages : 477
Book Description
Dynamic Behavior of Materials, Volume 1: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the first volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: General Dynamic Material Properties Novel Dynamic Testing Techniques Dynamic Fracture and Failure Novel Testing Techniques Dynamic Behavior of Geo-materials Dynamic Behavior of Biological and Biomimetic Materials Dynamic Behavior of Composites and Multifunctional Materials Dynamic Behavior of Low-Impedance materials Multi-scale Modeling of Dynamic Behavior of Materials Quantitative Visualization of Dynamic Behavior of Materials Shock/Blast Loading of Materials
Publisher: Springer Science & Business Media
ISBN: 3319007718
Category : Technology & Engineering
Languages : en
Pages : 477
Book Description
Dynamic Behavior of Materials, Volume 1: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the first volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: General Dynamic Material Properties Novel Dynamic Testing Techniques Dynamic Fracture and Failure Novel Testing Techniques Dynamic Behavior of Geo-materials Dynamic Behavior of Biological and Biomimetic Materials Dynamic Behavior of Composites and Multifunctional Materials Dynamic Behavior of Low-Impedance materials Multi-scale Modeling of Dynamic Behavior of Materials Quantitative Visualization of Dynamic Behavior of Materials Shock/Blast Loading of Materials
2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials
Author: Alon Gany
Publisher: Springer Nature
ISBN: 9811917744
Category : Science
Languages : en
Pages : 640
Book Description
This book features selected papers presented at the 2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials. It discusses the latest progress in the field of advance carbon nanomaterials in energetic materials; including the structural design, theoretical calculation, synthesis, properties, and applications of carbon materials. It also presents the new technology and applications of advanced carbon nanomaterials in energetic materials. It can be used as a reference book for researchers in energetic materials and related fields. It is also be useful for undergraduates and postgraduates studying these topics.
Publisher: Springer Nature
ISBN: 9811917744
Category : Science
Languages : en
Pages : 640
Book Description
This book features selected papers presented at the 2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials. It discusses the latest progress in the field of advance carbon nanomaterials in energetic materials; including the structural design, theoretical calculation, synthesis, properties, and applications of carbon materials. It also presents the new technology and applications of advanced carbon nanomaterials in energetic materials. It can be used as a reference book for researchers in energetic materials and related fields. It is also be useful for undergraduates and postgraduates studying these topics.
Proceedings
Author:
Publisher:
ISBN:
Category : Electronic journals
Languages : en
Pages : 884
Book Description
Publisher:
ISBN:
Category : Electronic journals
Languages : en
Pages : 884
Book Description
Shock Wave Science and Technology Reference Library, Vol. 5
Author: Blaine Asay
Publisher: Springer Science & Business Media
ISBN: 3540879536
Category : Technology & Engineering
Languages : en
Pages : 630
Book Description
Los Alamos National Laboratory is an incredible place. It was conceived and born amidst the most desperate of circumstances. It attracted some of the most brilliant minds, the most innovative entrepreneurs, and the most c- ative tinkerers of that generation. Out of that milieu emerged physics and engineering that beforehand was either unimagined, or thought to be f- tasy. One of the ?elds essentially invented during those years was the science of precision high explosives. Before 1942, explosives were used in munitions and commercial pursuits that demanded proper chemistry and con?nement for the necessary e?ect, but little else. The needs and requirements of the Manhattan project were of a much more precise and speci?c nature. Spatial and temporal speci?cations were reduced from centimeters and milliseconds to micrometers and nanoseconds. New theory and computational tools were required along with a raft of new experimental techniques and novel ways of interpreting the results. Over the next 40 years, the emphasis was on higher energy in smaller packages, more precise initiation schemes, better and safer formulations, and greater accuracy in forecasting performance. Researchers from many institutions began working in the emerging and expanding ?eld. In the midst of all of the work and progress in precision initiation and scienti?c study, in the early 1960s, papers began to appear detailing the ?rst quantitative studies of the transition from de?agration to detonation (DDT), ?rst in cast, then in pressed explosives, and ?nally in propellants.
Publisher: Springer Science & Business Media
ISBN: 3540879536
Category : Technology & Engineering
Languages : en
Pages : 630
Book Description
Los Alamos National Laboratory is an incredible place. It was conceived and born amidst the most desperate of circumstances. It attracted some of the most brilliant minds, the most innovative entrepreneurs, and the most c- ative tinkerers of that generation. Out of that milieu emerged physics and engineering that beforehand was either unimagined, or thought to be f- tasy. One of the ?elds essentially invented during those years was the science of precision high explosives. Before 1942, explosives were used in munitions and commercial pursuits that demanded proper chemistry and con?nement for the necessary e?ect, but little else. The needs and requirements of the Manhattan project were of a much more precise and speci?c nature. Spatial and temporal speci?cations were reduced from centimeters and milliseconds to micrometers and nanoseconds. New theory and computational tools were required along with a raft of new experimental techniques and novel ways of interpreting the results. Over the next 40 years, the emphasis was on higher energy in smaller packages, more precise initiation schemes, better and safer formulations, and greater accuracy in forecasting performance. Researchers from many institutions began working in the emerging and expanding ?eld. In the midst of all of the work and progress in precision initiation and scienti?c study, in the early 1960s, papers began to appear detailing the ?rst quantitative studies of the transition from de?agration to detonation (DDT), ?rst in cast, then in pressed explosives, and ?nally in propellants.
Energetic Materials
Author: Ulrich Teipel
Publisher: John Wiley & Sons
ISBN: 3527604936
Category : Science
Languages : en
Pages : 643
Book Description
Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.
Publisher: John Wiley & Sons
ISBN: 3527604936
Category : Science
Languages : en
Pages : 643
Book Description
Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.
Shock Compression of Condensed Matter--2003
Author: Michael D. Furnish
Publisher:
ISBN:
Category : Condensed matter
Languages : en
Pages : 820
Book Description
Two volumes contain 350 papers presented at the 13th Biennial International Conference of the APS Topical Group on Shock Compression of Condensed Matter (Portland, Oregon, July 2003). One of the three plenary lectures was given by James Asay (Institute for Shock Physics, Washington State U., Pullman, Washington) on wave structure studies in condensed matter physics. The papers in v.1 address nonenergetic materials; energetic materials; phase transitions; the modeling, simulation, theory, and molecular dynamics modeling of nonreactive and reactive materials; spall, fracture, and fragmentation; constitutive and microstructural properties of metals; mechanical properties of polymers and composites; and mechanical properties of ceramics, glasses, ionic solids, and liquids. The largest number of papers in v.2 are under the headings mechanical properties of reactive materials; detonation and burn phenomena; explosive and initiation studies; experimental techniques; and geophysics, structures, and medical applications. The contributors represent 14 countries, where they work in state and private industry and academic settings. Indexed by both author and subject. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).
Publisher:
ISBN:
Category : Condensed matter
Languages : en
Pages : 820
Book Description
Two volumes contain 350 papers presented at the 13th Biennial International Conference of the APS Topical Group on Shock Compression of Condensed Matter (Portland, Oregon, July 2003). One of the three plenary lectures was given by James Asay (Institute for Shock Physics, Washington State U., Pullman, Washington) on wave structure studies in condensed matter physics. The papers in v.1 address nonenergetic materials; energetic materials; phase transitions; the modeling, simulation, theory, and molecular dynamics modeling of nonreactive and reactive materials; spall, fracture, and fragmentation; constitutive and microstructural properties of metals; mechanical properties of polymers and composites; and mechanical properties of ceramics, glasses, ionic solids, and liquids. The largest number of papers in v.2 are under the headings mechanical properties of reactive materials; detonation and burn phenomena; explosive and initiation studies; experimental techniques; and geophysics, structures, and medical applications. The contributors represent 14 countries, where they work in state and private industry and academic settings. Indexed by both author and subject. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).
Shock Compression of Condensed Matter - 2001
Author: Michael D. Furnish
Publisher: American Institute of Physics
ISBN:
Category : Science
Languages : en
Pages : 766
Book Description
This collection of 336 papers discusses recent research on the response of inert and energetic materials to high-pressure environments produced by rapid loading phenomena. This includes theoretical, computational (modeling/simulation) and experimental studies of inert and energetic materials, as well as ballistic and material synthesis studies and advances in experimental techniques. All papers have been peer-reviewed.
Publisher: American Institute of Physics
ISBN:
Category : Science
Languages : en
Pages : 766
Book Description
This collection of 336 papers discusses recent research on the response of inert and energetic materials to high-pressure environments produced by rapid loading phenomena. This includes theoretical, computational (modeling/simulation) and experimental studies of inert and energetic materials, as well as ballistic and material synthesis studies and advances in experimental techniques. All papers have been peer-reviewed.
Shock Compression of Condensed Matter--1999
Author: Michael D. Furnish
Publisher:
ISBN:
Category : Condensed matter
Languages : en
Pages : 732
Book Description
Publisher:
ISBN:
Category : Condensed matter
Languages : en
Pages : 732
Book Description