Estimation of the Seismic Response of Buildings and the Effect of Different Scaling Methods for Ground Motion

Estimation of the Seismic Response of Buildings and the Effect of Different Scaling Methods for Ground Motion PDF Author: Sundar Ram Krishna Murthy Mohan Ram
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description

Estimation of the Seismic Response of Buildings and the Effect of Different Scaling Methods for Ground Motion

Estimation of the Seismic Response of Buildings and the Effect of Different Scaling Methods for Ground Motion PDF Author: Sundar Ram Krishna Murthy Mohan Ram
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description


Selection and Scaling of Ground Motions for Nonlinear Response History Analysis of Buildings in Performance-based Earthquake Engineering

Selection and Scaling of Ground Motions for Nonlinear Response History Analysis of Buildings in Performance-based Earthquake Engineering PDF Author: Neal Simon Kwong
Publisher:
ISBN:
Category :
Languages : en
Pages : 195

Get Book Here

Book Description
This dissertation investigates the issue of selecting and scaling ground motions as input excitations for response history analyses of buildings in performance-based earthquake engineering. Many ground motion selection and modication (GMSM) procedures have been developed to select ground motions for a wide variety of objectives. In this research, we focus on the selection and scaling of single, horizontal components of ground motion for estimating seismic demand hazard curves (SDHCs) of multistory frames at a given site. In Chapter 2, a framework is developed for evaluating GMSM procedures in their ability to provide accurate estimates of the SDHC. The notion of a benchmark SDHC is introduced, enabling biases caused by GMSM procedures to be isolated from other sources of bias. More importantly, the ability to quantify bias facilitates the identication of intensity measures (IMs) that are sufficient. However, this approach is limited by the availability of recorded ground motions and of prediction models for engineering demand parameters (EDPs) of structures. The framework developed in Chapter 2 is applied to synthetic ground motions in Chapter 3, where biases in estimates of SDHCs caused by GMSM procedures can be estimated for any structural system and any EDP. However, the use of synthetic ground motions gives rise to the issue of developing benchmark-consistent ground motion prediction models. Based on the results from Chapters 2-3, it is hypothesised that the potential bias in any SDHC estimate is caused directly by two important properties of the particular selection of ground motions: (i) hazard consistency, and (ii) IM sufficiency. A novel ground motion selection procedure, rooted in the theory of Importance Sampling, is developed in Chapter 4 that allows: (i) hazard consistency of the selected motions to be directly enforced for a user-specified collection of IMs, and (ii) SDHCs of a structure to be estimated from a single ensemble of ground motions, with the option of avoiding record scaling altogether. This procedure, together with two other contemporary GMSM procedures -- (i) "exact" Conditional Spectrum and (ii) Generalized Conditional Intensity Measure -- are evaluated in Chapters 5-6 for a variety of structural systems and EDPs at a specified site. In these chapters, the amount of effort involved in implementing these procedures for estimating SDHCs is summarized in a step-by-step form, and the magnitude of biases caused by these procedures are documented.

Measuring, Modeling and Predicting the Seismic Site Effect

Measuring, Modeling and Predicting the Seismic Site Effect PDF Author: Yefei Ren
Publisher: Frontiers Media SA
ISBN: 2832540090
Category : Science
Languages : en
Pages : 297

Get Book Here

Book Description
As recognized universally by both seismology and earthquake engineering communities, the amplitude and frequency content of ground motions are influenced by local site effects, including the effects of near-surface geologic materials, surface topographic and basin effects, and so on. Strong linkage between seismic site effect and earthquake damage has been commonly demonstrated from many past earthquakes. Therefore, quantitative and reliable evaluation of the seismic site effect is one of the crucial aspects in seismic hazard assessment and risk mitigation. With the significant advancement of modern seismic monitoring networks and arrays, huge amounts of high-quality seismic records are now being accumulated. This encourages us to measure the site responses and its associated uncertainty for selected seismic stations by some record-dependent approaches, such as horizontal-to-vertical spectral ratio (HVSR) measurements, generalized spectral inversion (GIT) methods, etc. Machine learning techniques also show significant promise in characterization of the near-surface geologic properties and prediction of site response. These data-driven approaches help us to better understand the physics of spatial and temporal variabilities of ground motions. Due to more and more site-specific data being captured, invoking non-ergodic assumptions in seismic response analysis has recently been a topic of great interest in the community. For specific site response analysis, numerical simulations are carried out to model the dynamic process of seismic waves propagating and scattering in the subsurface strata. With development of modeling capacity, great efforts have been taken to evaluate quantitatively the complex 2D and 3D effects on seismic site response.

Seismic Assessment and Rehabilitation of Existing Buildings

Seismic Assessment and Rehabilitation of Existing Buildings PDF Author: S. Tanvir Wasti
Publisher: Springer Science & Business Media
ISBN: 9401000212
Category : Technology & Engineering
Languages : en
Pages : 562

Get Book Here

Book Description
The present volume contains a total of 23 papers centred on the research area of Seismic Assessment and Rehabilitation of Existing Buildings. This subject also forms the core of Project SfP977231, sponsored by the NATO Science for Peace Office and supported by the Scientific and Technical Research Council of Turkey [ TUBIT AK ]. Most of these papers were presented by the authors at a NATO Science for Peace Workshop held in Izmir on 13 - 14 May, 2003 and reflect a part of their latest work conducted within the general confines of the title of the NATO Project. Middle East Technical University, Ankara, Turkey serves as the hub of Project SfP977231 and coordinates research under the project with universities within Turkey, e. g. Istanbul Technical University and Kocaeli University, and with partner institutions in Greece and the Former Yugoslav Republic of Macedonia: A few articles have also been contributed by invited experts, who are all noted researchers in the field. Altogether, the contents of the volume deal with a vast array of problems in Seismic Assessment and Rehabilitation and cover a wide range of possible solutions, techniques and proposals. It is intended to touch upon many of these aspects separately below. Earthquakes constitute possibly the most widely spread and also the most feared of natural hazards. Recent earthquakes within the first six months of 2003, such as the Bingol Earthquake in Turkey and the Algerian earthquake, have caused both loss of life and severe damage to property.

Ground Motion Simulation Validation Based on Loss Metrics

Ground Motion Simulation Validation Based on Loss Metrics PDF Author: Poojitha Shashi
Publisher:
ISBN: 9780355066098
Category :
Languages : en
Pages : 59

Get Book Here

Book Description
The effect of the earthquake ground motion parameters on the probabilistic loss estimation of buildings is the major interest of this study. For the seismic performance assessment, real ground motion records from the past earthquakes are required. Estimation of repair costs in future earthquakes is the major component for seismic loss analysis. This study addresses the sensitivity of the statistical characteristics of ground motions contributing to the building loss. Among these characteristics are the ground-shaking intensity (Arias Intensity), duration, and frequency at the middle of strong-shaking phase of the ground motion. These parameters are vital in determining the seismic response of the building structure. A fine study on the sensitivity of the seismic response and corresponding loss of the building structure to ground motions model parameters is carried out using Performance-based Earth- quake Engineering and Performance Assessment Computational Tool, respectively. But due to the scarcity of moderate to large earthquakes, the real records fail to match the required characteristics of motions, as there are insufficient set of data available for analysis to be carried out. Even, the of technique scaling ground motions results in overall unrealistic properties. This has led to the simulation of ground motions which will provide the additional and hopefully accurate predicted information on characteristics of the moderate to large earthquakes. Hence, a fully non-stationary stochastic model for strong earthquake ground motion model is considered which employs the statistical characteristics (waveform parameters) as model parameters matched with those of identified for a large sample of recorded ground motions for specified earthquake and site characteristics, to deliver simulated ground motions to examine the building loss metrics, which depends on the uncertainties in various analysis process starting from obtaining Intensity Measure (IM), Demand parameters (EDPs) to the repair cost estimates. From the predictive equations, specified earthquake and site characteristics results in the model parameters.Further, the validity of simulated ground motion time series representing the real ground shaking during future earthquakes is a crucial step. This study employs the hybrid broad- band ground motion simulation applied simulations to validate against the real records. With the help of hybrid approach, making use of wave propagation phenomena and site response characterization, effort has been taken for validation of these simulated ground motions is conducted for the sensitivity of seismic response and loss for these simulated ground motions.

Performance of Innovative Controlled Buildings Under Resonant and Critical Earthquake Ground Motions

Performance of Innovative Controlled Buildings Under Resonant and Critical Earthquake Ground Motions PDF Author: Izuru Takewaki
Publisher: Frontiers Media SA
ISBN: 2889456366
Category :
Languages : en
Pages : 87

Get Book Here

Book Description
This eBook is the fourth in a series of books on the critical earthquake response of elastic or elastic-plastic structures under near-fault or long-duration ground motions, and includes six original research papers which were published in the specialty section Earthquake Engineering in ‘Frontiers in Built Environment’. Several extensions of the first eBook, the second eBook and the third eBook are included here. The first article is on the comparison of earthquake resilience of various building structures including innovative base-isolation systems and control systems. Pulse-type ground motions and resonant harmonic ground motions are used for investigating the earthquake resilience of those innovative building structures. The second article is concerned with the performance of an innovative seismic response controlled system with shear walls and concentrated dampers in lower stories. The resonant one-cycle sine waves and resonant harmonic waves are used as the input ground motions. The third article is related to the robustness evaluation of a base-isolation building-connection hybrid controlled building structure under the critical long-period and long-duration ground motion. The multi impulse is used as a substitute for a long-period and long-duration ground motion and the model reduction to a single-degree-of-freedom (SDOF) system is conducted to propose a simple response evaluation method. The fourth article is an extension of the previously proposed energy balance approach to a damped bilinear hysteretic SDOF system under a double impulse as a substitute for a near-fault ground motion. The energy absorption through viscous damping is incorporated appropriately in the energy balance and the application of the proposed method to actual recorded ground motions is presented. The fifth article is on the robustness evaluation of base-isolation building-connection hybrid controlled building structures considering uncertainties in deep ground. The earthquake ground motion amplitude at the earthquake bedrock is evaluated by the Boore’s stochastic method in 1983 including the fault rupture and the wave propagation into the earthquake bedrock. Then the phase angle property at the earthquake bedrock is investigated by introducing the concept of phase difference which is defined for each earthquake type. A wave at the ground surface nearly resonant to the base-isolation building-connection hybrid controlled building structure is produced by considering uncertainties in deep ground. The sixth article is concerned with the critical response of nonlinear base-isolated buildings considering soil-structure interaction under a double impulse as a substitute for a near-fault ground motion. The complicated model of a nonlinear base-isolated building on ground is modeled into an SDOF system after a few model reduction processes. The approach presented in this eBook, together with the previous eBooks, is an epoch-making accomplishment to open the door for simpler and deeper understanding of structural reliability and resilience of built environments in the elastic-plastic and nonlinear range.

Estimating the Seismic Response of Base-isolated Buildings Including Torsion, Rocking, and Axial-load Effects

Estimating the Seismic Response of Base-isolated Buildings Including Torsion, Rocking, and Axial-load Effects PDF Author: Keri Lynn Ryan
Publisher:
ISBN:
Category : Axial loads
Languages : en
Pages : 506

Get Book Here

Book Description


Publications of the Geological Survey

Publications of the Geological Survey PDF Author: Geological Survey (U.S.)
Publisher:
ISBN:
Category : Geology
Languages : en
Pages : 392

Get Book Here

Book Description


Utilization of Physics-based Simulated Earthquake Ground Motions for Performance Assessment of Tall Buildings

Utilization of Physics-based Simulated Earthquake Ground Motions for Performance Assessment of Tall Buildings PDF Author: Nenad Bijelić
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
Databases of recorded motion are limited despite the increasing amount of data collected through strong motion instrumentation programs. Particular lack of data exists for large magnitude events and at close distances as well as on earthquakes in deep sedimentary basins. Additionally, databases of recorded motions are also limited in representation of energy at long periods due to the useable frequencies of recording instruments. This lack of data is currently partially addressed through assumption of ergodicity in development of empirical ground motion prediction equations (GMPEs). Nevertheless, challenges remain for calibration of empirical GMPEs as used in conventional approaches for probabilistic estimation of seismic hazard. At the same time, limited data on strong earthquakes and their effect on structures poses challenges for making reliable risk assessments particularly for tall buildings. For instance, while the collapse safety of tall buildings is likely controlled by large magnitude earthquakes with long du- rations and high long-period content, there are few available recorded ground motions to evaluate these issues. The influence of geologic basins on amplifying ground motion effects raises additional questions. Absent recorded motions from past large magnitude earthquakes, physics-based ground motion simulations provide a viable alternative due to the ability to consider extreme ground motions while being inherently site-specific and explicitly considering instances not well constrained by limited empirical data. This thesis focuses on utilization of physics-based simulated earthquake ground motions for performance assessment of tall buildings with three main goals: (1) developing confidence in the use of simulated ground motions through comparative assessments of recorded and simulated motions; (2) identifying important characteristics of extreme ground motions for col- lapse safety of tall buildings; (3) exploring areas where simulated ground motions provide significant advantages over recorded motions for performance-based engineering. To gain confidence in the use of simulated motions for full performance assessment of tall buildings, a 'similar intensity measure' validation study was performed. Structural responses to ground motions simulated with different methods on the Southern California Earthquake Center (SCEC) Broadband Platform (BBP) are contrasted to recorded motions from PEER NGA database with similar spectral shape and significant durations. Two tall buildings, a 20-story concrete frame and a 42-story concrete core wall building, are analyzed at increasing levels of ground motion intensity, up to structural collapse, to check for statistically significant differences between the responses to simulated and recorded motions. Considered demands include story drift ratios, floor accelerations and collapse response. These comparisons yield similar results in most cases but also reveal instances where certain simulated ground motions can result in biased responses. The source of bias is traced to differences in correlations of spectral values in some of the stochastic ground motion simulations. When the differences in correlations are removed, simulated and recorded motions yield comparable results. Moving beyond validation, the thesis also explored areas where the use of simulated motions provides advantages over approaches based on limited databases of recorded motions for performance-based engineering. One such area is seismic risk in deep sedimentary basins which is studied by examining collapse risk and drift demands of a 20-story archetype tall building utilizing ground motions at four sites in the Los Angeles basin. Seismic demands of the building are calculated form nonlinear structural analyses using large datasets (~500,000 ground motions per site) of unscaled, site-specific simulated seismograms. Seismic hazard and building performance from direct analysis of SCEC CyberShake motions are contrasted with values obtained based on 'conventional' approaches that rely on recorded motions coupled with probabilistic seismic hazard assessments. The analysis shows that, depending on the location of the site within the basin, the two approaches can yield drastically different results. For instance, at a deep basin site the CyberShake-based analysis yields around seven times larger mean annual frequency of collapse ( c) and significantly higher drift demands (e.g. drift demand of 1% is exceeded around three times more frequently) compared to the conventional approach. Both the hazard as well as the spectral shapes of the motions are shown to drive the differences in responses. Deaggregation of collapse risk is performed to identify the relative contributions of earthquake fault ruptures, linking building responses with specific seismograms and contrasting collapse risk with hazard. The effect of earthquake ground motions in deep sedimentary basins on structural collapse risk is further studied through the use of CyberShake earthquake simulations in the Los Angeles basin. Distinctive waveform characteristics of deep basin seismograms are used to classify the ground motions into several archetype groups, and the damaging influence of the basin effects are evaluated by comparing nonlinear structural responses under comparable basin and non-basin ground motions. The deep basin ground motions are observed to have larger durations and spectral intensities than non-basin motions for vibration periods longer than about 1.5 seconds, which can increase the relative structural collapse risk by up to 20 percent between ground motions with otherwise comparable spectral accelerations and significant durations. Two new metrics, termed sustained amplitude response spectra (RSx spectra) and significant duration spectra (Da spectra), are proposed to quantify period-dependent duration effects that are not otherwise captured by conventional ground motion intensity measures. The proposed sustained amplitude response spectra and significant duration spectra show promise for characterizing the damaging effects of long duration features of basin ground motions on buildings and other structures. The large database of CyberShake simulations is utilized to re-examine the relationships between engineering demand parameters and input ground motions on structural response. Focusing on collapse response, machine learning techniques are applied to results of about two million nonlinear time history analyses of an archetype 20-story tall building performed using CyberShake ground motions. The resulting feature selection (based on regularized logistic regression) generally confirms existing understanding of collapse predictors as gained from scaled recorded motions but also reveals the benefit of some novel intensity measures (IMs), in particular the RSx spectral features. In addition, the statistical interrogations of the large collection of hazard-consistent simulations demonstrate the utility of different IMs for collapse predictions in a way that is not possible with recorded motions. A small subset of robust IMs is identified and used in development of an efficient collapse classification algorithm, which is tested on benchmark results from other CyberShake sites. The classification algorithm yields promising results for application to regional risk assessment of building performance.

Measurements and Evaluation of Building Response to Ground Motion at Various Stages of Construction

Measurements and Evaluation of Building Response to Ground Motion at Various Stages of Construction PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
Architectural elements contribute significantly to the total seismic response of high-rise frame buildings. Although the characteristics of ground motion have considerable effect on the response of buildings, architectural elements increase the stiffness of the total system and reduce its period. The measurements also showed that partition influence is reduced over a period of time, as indicated by the lengthening of periods. At low levels of motion where the partitions contribute lateral stiffness to the system, they carry a proportional amount of the total lateral load and add sizable energy-absorbing capacity to the system. However, when the partitions are removed, the load formerly carried by the partitions is again transferred to the structural system. Because of the different response mode shapes of the models, the interstory drift at the first floor for the same roof displacement can vary significantly among models. In the models studied, the building without partitions at the first floor had the largest interstory drift.