Design and Construction of a Small Scale Water Tunnel PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Design and Construction of a Small Scale Water Tunnel PDF full book. Access full book title Design and Construction of a Small Scale Water Tunnel by Vince Bilotta. Download full books in PDF and EPUB format.
Author: Vince Bilotta
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Author: Vince Bilotta
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Author: Oriol Brascó Garcés
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
This document covers the study, design and construction of a low cost Water Tunnel to perform practical studies and lab work at EETAC (UPC Castelldefels). This project has been divided in three principal phases: Study, Design and Construction. In the first phase of the project, a theoretical study regarding the fluid dynamics of water tunnels has been done. This study is essential in order to get an optimal design of the Water Tunnel and also fulfil the initial design requirements. The main design requirements are to achieve a homogeneous velocity at the test region and the capacity to work with Reynolds numbers comprised between 500 and 1000. Once these requirements were established, the design phase started. SolidWorks was used to create the design. Once the design was created, it needs to be validated. For this purpose, three different simulations were performed in order to validate the design with a Computational Fluid Dynamics (CFD) software. The chosen software was ANSYS. The objective of the first simulation was to validate the property of symmetry inside the Water Tunnel. The symmetry inside the Water Tunnel was proved and a second simulation with half the control volume and a finer mesh was realized. Finally, in order to prove the mesh convergence, one last simulation was done. All these simulations proved that the Water Tunnel design fulfilled all the initial design requirements. The construction procedure begun once the design was validated. This last phase is still ongoing; the tunnel is being built by Metalvent S.A company. This Water Tunnel has been designed with the objective of reducing costs when compared it with other water tunnels build globally. Also, the size of the Water Tunnel is also minimized so it can be a part of the laboratory equipment in EETAC. This Water Tunnel will be an interesting contribution to the University equipment, and thanks to it, other projects will be done, from implementing new systems that improve the Water tunnel to experiments that uses the Water Tunnel as the main tool.
Author: Pietro Lunardi
Publisher: Springer Science & Business Media
ISBN: 3540738754
Category : Science
Languages : en
Pages : 580
Get Book Here
Book Description
This work illustrates how the Analysis of Controlled Deformation in Rocks and Soils (ADECO-RS) is used in the design and the construction of tunnels. This is a very new and effective way of tunnel construction. The ADECO-RS approach makes a clear distinction between the design and the construction stages and allows reliable forecasts of construction times and costs to be made. It uses the advance core (the core of ground ahead of the face) as a structural tool for the long and short term stabilisation of tunnels, after its rigidity has first been regulated using conservation techniques.
Author:
Publisher:
ISBN:
Category : Weights and measures
Languages : en
Pages : 298
Get Book Here
Book Description
Author: Sanket Kalgutkar
Publisher: Grin Publishing
ISBN: 9783668298514
Category :
Languages : en
Pages : 92
Get Book Here
Book Description
Project Report from the year 2016 in the subject Engineering - Civil Engineering, grade: AA, Priyadarshini College of Engineering, Nagpur, course: B.E AERONAUTICAL ENGINEERING, language: English, abstract: This text depicts how a low speed water tunnel was designed and fabricated, as well as tested and analysed. The low speed recirculating type water tunnel was successfully designed and fabricated. The designing was done by taking into consideration of the Reynolds no. flow velocity, boundary layer formation, cavitation number and Froude's number. Theoretical and computational studies were made to decide the shape and the size of the various components of the low speed water tunnel. Uniformity in the setup of main objective and was successfully achieved. The setup consists of an inlet plenum with baffle to reduce turbulence or splashing, honeycomb structure, converging section, test section and wide angle diffuser and outlet module suitable low power single phase motor was selected for continuous flow of water in the setup. The water was recirculated using this motor and appropriate plumbing system. All the components were designed, analyzed, constructed and installed successfully .General purpose polymer was used as a ground material for the fabrication purpose. Necessary up gradations were made during various stages of the project. Flow visualization over the test bodies was successfully visualized using a dye injection system.
Author: United States. National Bureau of Standards
Publisher:
ISBN:
Category : Hydraulic engineering
Languages : en
Pages : 206
Get Book Here
Book Description
Author: United States. National Bureau of Standards
Publisher:
ISBN:
Category : Weights and measures
Languages : en
Pages : 216
Get Book Here
Book Description
Author: Roger Lincoln Steele
Publisher:
ISBN:
Category : Water tunnels
Languages : en
Pages :
Get Book Here
Book Description
Author: Emilio Bilotta
Publisher: CRC Press
ISBN: 1000538737
Category : Technology & Engineering
Languages : en
Pages : 484
Get Book Here
Book Description
The book provides a new, global, updated, thorough, clear and practical risk-based approach to tunnelling design and construction methods, and discusses detailed examples of solutions applied to relevant case histories. It is organized in three sequential and integrated volumes: Volume 1: Concept – Basic Principles of Design Volume 2: Construction – Methods, Equipment, Tools and Materials Volume 3: Case Histories and Best Practices The book covers all aspects of tunnelling, giving useful and practical information about design (Volume 1), construction (Volume 2) and best practices (Volume 3). It provides the following features and benefits: updated vision on tunnelling design, tools, materials and construction balanced mix of theory, technology and applied experience different and harmonized points of view from academics, professionals and contractors easy consultation in the form of a handbook risk-oriented approach to tunnelling problems. The tunnelling industry is amazingly widespread and increasingly important all over the world, particularly in developing countries. The possible audience of the book are engineers, geologists, designers, constructors, providers, contractors, public and private customers, and, in general, technicians involved in the tunnelling and underground works industry. It is also a suitable source of information for industry professionals, senior undergraduate and graduate students, researchers and academics.
Author: Pierre Bely
Publisher: Springer Science & Business Media
ISBN: 0387226060
Category : Science
Languages : en
Pages : 527
Get Book Here
Book Description
There is no dearth of books on telescope optics and, indeed, optics is clearly a keyelementinthedesignandconstructionoftelescopes.Butitisbynomeans the only important element. As telescopes become larger and more costly, other aspects such as structures, pointing, wavefront control, enclosures, and project management become just as critical. Although most of the technical knowledge required for all these ?elds is available in various specialized books, journal articles, and technical reports, they are not necessarily written with application to telescopes in mind. This bookisa?rstattemptatassemblinginasingletextthebasicastronomicaland engineering principles used in the design and construction of large telescopes. Itsaimistobroadlycoverallmajoraspectsofthe?eld,fromthefundamentals ofastronomicalobservationto optics, controlsystems,structural,mechanical, andthermalengineering,aswellasspecializedtopicssuchassiteselectionand program management. This subject is so vast that an in-depth treatment is obviously imprac- cal. Our intent is therefore only to provide a comprehensive introduction to the essential aspects of telescope design and construction. This book will not replace specialized scienti?c and technical texts. But we hope that it will be useful for astronomers, managers, and systems engineers who seek a basic understanding of the underlying principles of telescope making, and for s- cialists who wish to acquaint themselves with the fundamental requirements and approaches of their colleagues in other disciplines.
