Characterization and Process Development of Zinc Oxide-based Light-emitting Diodes PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Characterization and Process Development of Zinc Oxide-based Light-emitting Diodes PDF full book. Access full book title Characterization and Process Development of Zinc Oxide-based Light-emitting Diodes by Jau-Jiun Chen. Download full books in PDF and EPUB format.
Author: Jau-Jiun Chen
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
ABSTRACT: ZnO-based materials have great potential for UV light-emitting diodes (LEDs) and transparent electronics because of the high exciton binding energy of ZnO relative to GaN. Fabricating an effective LED from novel materials requires a detailed knowledge of the band offset, etch, and contact behavior of the material. This work determined the valence and conduction band offsets for Zn095Cd0.05O/ZnO (0.17 eV, 0.30 eV) and related materials using x-ray photoelectron spectroscopy (XPS) and photoluminescence (PL). These methods were also used to study carrier confinement in two promising passivation materials: MgO/GaN (1.06 eV, 3.30 eV) and Sc2O3/GaN (0.42 eV, 2.14 eV). To form an LED mesa, it is critical to understand the etch rate of ZnO-based materials. In this work, HCl and H3PO4 were used as etchants for ZnCdO/ZnO (~50 nm·1-min−1 HCl/~15 nm·min−1 H3PO4) and ZnMgO/ZnO (300-1100 nm·min−1 HCl/120-300 nm·min−1H3PO4). A high degree of selectivity was sought using these etchants on ZnCdO/ZnO (~50 HCl/~15 H3PO4) and ZnMgO/ZnO (~300-400 HCl/~25 H3PO4). Alloyed Ti/Au and Ti/Al/Pt/Au contacts were deposited on n-type Zn095Cd0.05O, with excellent contact resistivities of and 2.3x10−4 and 1.6x10−4 ohm-cm2, respectively. Alloyed Ti/Au and indium-tin-oxide (ITO)/Ti/Au metallization of n-type Al-doped ZnO was used to create ohmic metal contacts with excellent contact resistivities of 6x10−8 and 4.6x10−6ohm-cm2. Using SiLENSe Software, the optimum active layer thickness was found to be 200 nm.
Author: Jau-Jiun Chen
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
ABSTRACT: ZnO-based materials have great potential for UV light-emitting diodes (LEDs) and transparent electronics because of the high exciton binding energy of ZnO relative to GaN. Fabricating an effective LED from novel materials requires a detailed knowledge of the band offset, etch, and contact behavior of the material. This work determined the valence and conduction band offsets for Zn095Cd0.05O/ZnO (0.17 eV, 0.30 eV) and related materials using x-ray photoelectron spectroscopy (XPS) and photoluminescence (PL). These methods were also used to study carrier confinement in two promising passivation materials: MgO/GaN (1.06 eV, 3.30 eV) and Sc2O3/GaN (0.42 eV, 2.14 eV). To form an LED mesa, it is critical to understand the etch rate of ZnO-based materials. In this work, HCl and H3PO4 were used as etchants for ZnCdO/ZnO (~50 nm·1-min−1 HCl/~15 nm·min−1 H3PO4) and ZnMgO/ZnO (300-1100 nm·min−1 HCl/120-300 nm·min−1H3PO4). A high degree of selectivity was sought using these etchants on ZnCdO/ZnO (~50 HCl/~15 H3PO4) and ZnMgO/ZnO (~300-400 HCl/~25 H3PO4). Alloyed Ti/Au and Ti/Al/Pt/Au contacts were deposited on n-type Zn095Cd0.05O, with excellent contact resistivities of and 2.3x10−4 and 1.6x10−4 ohm-cm2, respectively. Alloyed Ti/Au and indium-tin-oxide (ITO)/Ti/Au metallization of n-type Al-doped ZnO was used to create ohmic metal contacts with excellent contact resistivities of 6x10−8 and 4.6x10−6ohm-cm2. Using SiLENSe Software, the optimum active layer thickness was found to be 200 nm.
Author: Jieying Kong
Publisher:
ISBN:
Category : Light emitting diodes
Languages : en
Pages : 113
Get Book Here
Book Description
Author: Hyun-Sik Kim
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
ZnO-based light emitting diodes were fabricated on c-plane sapphire using ZnO:P/ Zn[subscript 0.9]Mg[subscript 0.1]O/ZnO/ Zn[subscript 0.9]Mg[subscript 0.1]O/ZnO:Ga p-i-n heterostructures. The p-i-n heterojunction diodes are rectifying and show light emission under forward bias. The electroluminescence spectra shows deep level emission at low bias, but near band edge ultraviolet emission at high voltage bias. A decrease in leakage currents in as-fabricated structures was achieved via low temperature oxygen annealing.
Author: Yu-Lin Wang
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
ABSTRACT: Hydrogen effects on the electrical and optical properties of p-i-n ZnO light emitting diodes (LEDs) were investigated. There were no diode characteristics or light emission observed from p-i-n ZnO LEDs unless the LEDs were annealed at 350 °C after fabrication. Annealed diodes showed band-edge electroluminescence at 385nm and a broad defect band with a peak at 930nm at room temperature. The effects of hydrogen plasma, moisture, water, and phosphoric acid solution on the annealed diode characteristics were investigated and significant degradation of electrical and optical properties were observed in all cases. The plasma-enhanced chemical vapor-deposited (PECVD) SiO2 and SiN[subscript x] passivation effects on p-i-n ZnO LEDs were also investigated.
Author: Chi-man Luk
Publisher:
ISBN:
Category : Semiconductors
Languages : en
Pages : 190
Get Book Here
Book Description
With the optimized growth parameters, n-ZnO:Al/i-ZnO/p-GaN:Mg heterojunction LEDs were fabricated. The electrical characteristics of the diodes were investigated. The ultraviolet (UV) electroluminescence (EL) from the device was detected at room temperature. The emission is attributed to the electron-hole radiative recombination in the ZnO region and is explained in detail by an energy band diagram. ZnO nanostructures are expected to have improved optical and electronic properties because of the quantum confinement effect. Using low-temperature aqueous chemical method, the ZnO nanorods arrays were grown on the buffer layers prepared at various temperatures. The nanorods were grown along [0001] direction. The PL measurement indicated that the emission spectrum covered a UV peak at ~ 380 nm and a broad visible band at ~ 560 nm. The PL spectra of the ZnO nanorods are independent on the growth temperature of the buffer layer. Moreover, the buffer-layer-thickness-dependent structural and optical properties were studied. The as-grown ZnO nanorods were utilized to fabricate hybrid LED with an organic semiconductor, N, N'-diphenyl-N, N'-bis(1-naphthyl)-1, 1'-biphenyl-4, 4'-diamine (?NPD), which is one of the most widely used hole transport and blue-emitting organic semiconductors. Current-voltage characteristics of the devices exhibited nonlinear rectifying behaviour. The EL spectra of the hybrid LEDs reveal a blue and broad yellowish green emission originated from the?NPD layer and the defect levels of the ZnO respectively. The origin of the emission bands from the hybrid structures will be examined.
Author: Nik Nur Atiqah Saidi
Publisher:
ISBN:
Category :
Languages : en
Pages : 182
Get Book Here
Book Description
The main purpose of this work is to design different structural dimensions of LED chip by using ZnO. Instead of using a typical rectangular or square structure, cylindrical and conical like structures are used to fulfill the main objective. Besides that, there are also several specific objectives in order to improve the quality of studies and to ensure this research is parallel with the theories of LED. The objectives are to investigate the effect of doping layer thickness in cylindrical and conical like structures of LED chip; to examine the effect of bias voltage supply in cylindrical and conical like structures of LED chip; to explore the characteristic of ZnO LED by analyzing the I-V characteristic curves, two-dimensional (2D) emission rate, relation of total emission rate and current, and internal quantum efficiency (IQE) with current variation; to evaluate the drift and diffusion process of carrier flows in cylindrical and conical like structures.
Author: Nargis Bano
Publisher:
ISBN: 9789173930543
Category :
Languages : en
Pages : 68
Get Book Here
Book Description
Author: Michelle Anne Myers
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Applications of zinc oxide (ZnO) for optoelectronic devices, including light emitting diodes, semiconductor lasers, and solar cells have not yet been realized due to the lack of high-quality p-type ZnO. In the research presented herein, pulsed laser deposition is employed to grow Ag-doped ZnO thin films, which are characterized in an attempt to understand the ability of Ag to act as a p-type dopant. By correlating the effects of the substrate temperature, oxygen pressure, and laser energy on the electrical and microstructural properties of Ag-doped ZnO films grown on c-cut sapphire substrates, p-type conductivity is achieved under elevated substrate temperatures. Characteristic stacking fault features have been continuously observed by transmission electron microscopy in all of the p-type films. Photoluminescence studies on n-type and p-type Ag-doped ZnO thin films demonstrate the role of stacking faults in determining the conductivity of the films. Exciton emission attributed to basal plane stacking faults suggests that the acceptor impurities are localized nearby the stacking faults in the n-type films. The photoluminescence investigation provides a correlation between microstructural characteristics and electrical properties of Ag- doped ZnO thin films; a link that enables further understanding of the doping nature of Ag impurities in ZnO. Under optimized deposition conditions, various substrates are investigated as potential candidates for ZnO thin film growth, including r -cut sapphire, quartz, and amorphous glass. Electrical results indicated that despite narrow conditions for obtaining p-type conductivity at a given substrate temperature, flexibility in substrate choice enables improved electrical properties. In parallel, N+-ion implantation at elevated temperatures is explored as an alternative approach to achieve p-type ZnO. The ion implantation fluence and temperature have been optimized to achieve p-type conductivity. Transmission electron microscopy reveals that characteristic stacking fault features are present throughout the p-type films, however in n-type N-doped films high-density defect clusters are observed. These results suggest that the temperature under which ion implantation is performed plays a critical role in determining the amount of dynamic defect re- combination that can take place, as well as defect cluster formation processes. Ion implantation at elevated temperatures is shown to be an effective method to introduce increased concentrations of p-type N dopants while reducing the amount of stable post-implantation disorder. Finally, the fabrication and properties of p-type Ag-doped ZnO/n-type ZnO and p-type N-doped ZnO/n-type ZnO thin film junctions were reported. For the N-doped sample, a rectifying behavior was observed in the I-V curve, consistent with N-doped ZnO being p-type and forming a p-n junction. The turn-on voltage of the device was -2.3 V under forward bias. The Ag-doped samples did not result in rectifying behavior as a result of conversion of the p-type layer to n-type behavior under the n- type layer deposition conditions. The systematic studies in this dissertation provide possible routes to grow p-type Ag-doped ZnO films and in-situ thermal activation of N-implanted dopant ions, to overcome the growth temperature limits, and to push one step closer to the future integration of ZnO-based devices. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/149354
Author: Chennupati Jagadish
Publisher: Elsevier
ISBN: 0080464033
Category : Science
Languages : en
Pages : 600
Get Book Here
Book Description
With an in-depth exploration of the following topics, this book covers the broad uses of zinc oxide within the fields of materials science and engineering: - Recent advances in bulk , thin film and nanowire growth of ZnO (including MBE, MOCVD and PLD), - The characterization of the resulting material (including the related ternary systems ZgMgO and ZnCdO), - Improvements in device processing modules (including ion implantation for doping and isolation ,Ohmic and Schottky contacts , wet and dry etching), - The role of impurities and defects on materials properties - Applications of ZnO in UV light emitters/detectors, gas, biological and chemical-sensing, transparent electronics, spintronics and thin film
Author: Kamlendra Awasthi
Publisher: Elsevier
ISBN: 0128189010
Category : Technology & Engineering
Languages : en
Pages : 781
Get Book Here
Book Description
Nanostructured Zinc Oxide covers the various routes for the synthesis of different types of nanostructured zinc oxide including; 1D (nanorods, nanowires etc.), 2D and 3D (nanosheets, nanoparticles, nanospheres etc.). This comprehensive overview provides readers with a clear understanding of the various parameters controlling morphologies. The book also reviews key properties of ZnO including optical, electronic, thermal, piezoelectric and surface properties and techniques in order to tailor key properties. There is a large emphasis in the book on ZnO nanostructures and their role in optoelectronics. ZnO is very interesting and widely investigated material for a number of applications. This book presents up-to-date information about the ZnO nanostructures-based applications such as gas sensing, pH sensing, photocatalysis, antibacterial activity, drug delivery, and electrodes for optoelectronics. Reviews methods to synthesize, tailor, and characterize 1D, 2D, and 3D zinc oxide nanostructured materials Discusses key properties of zinc oxide nanostructured materials including optical, electronic, thermal, piezoelectric, and surface properties Addresses most relevant zinc oxide applications in optoelectronics such as light-emitting diodes, solar cells, and sensors
