Author: W. H. Jens
Publisher:
ISBN:
Category : Heat exchangers
Languages : en
Pages : 146
Book Description
Analysis of Heat Transfer, Burnout, Pressure Drop and Density Data for High-pressure Water
Author: W. H. Jens
Publisher:
ISBN:
Category : Heat exchangers
Languages : en
Pages : 146
Book Description
Publisher:
ISBN:
Category : Heat exchangers
Languages : en
Pages : 146
Book Description
Heat Transfer, Burnout, and Pressure Drop for Water in Swirl Flow Through Tubes with Internal Twisted Tapes
Author: W. R. Gambill
Publisher:
ISBN:
Category : Fluid dynamics
Languages : en
Pages : 118
Book Description
Publisher:
ISBN:
Category : Fluid dynamics
Languages : en
Pages : 118
Book Description
Forced-convection Heat Transfer Burnout Studies for Water in Rectangular Channels and Round Tubes at Pressures Above 500 PSIA
Author: R. A. DeBortoli
Publisher:
ISBN:
Category :
Languages : en
Pages : 192
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 192
Book Description
HFIR Heat-transfer Studies of Turbulent Water Flow in Thin Rectangular Channels
Author: W. R. Gambill
Publisher:
ISBN:
Category : Channels (Hydraulic engineering)
Languages : en
Pages : 80
Book Description
Publisher:
ISBN:
Category : Channels (Hydraulic engineering)
Languages : en
Pages : 80
Book Description
Heat Transfer Equipment Design
Author: R. K. Shah
Publisher: CRC Press
ISBN: 9780891167297
Category : Science
Languages : en
Pages : 1104
Book Description
Publisher: CRC Press
ISBN: 9780891167297
Category : Science
Languages : en
Pages : 1104
Book Description
Influence of Airfoil Trailing-edge Angle and Trailing-edge Thickness Variation on the Effectiveness of a Plain Flap at High Subsonic Mach Numbers
Author: Albert D. Hemenover
Publisher:
ISBN:
Category : Aerofoils
Languages : en
Pages : 764
Book Description
The effects of variation of trailing-edge angle and trailing-edge thickness on the lift characteristics of a 10-percent-chord thick symmetrical NACA airfoil section with a 25-percent-chord plain flap are appraised from wind-tunnel tests at Mach numbers from 0.3 to 0.9 and Reynolds numbers varying correspondingly from 1 to 2 million. The airfoil trailing-edge angle was varied from approximately 18 to 6 degrees, and the trailing-edge thickness from zero to the thickness at the flap hinge line.
Publisher:
ISBN:
Category : Aerofoils
Languages : en
Pages : 764
Book Description
The effects of variation of trailing-edge angle and trailing-edge thickness on the lift characteristics of a 10-percent-chord thick symmetrical NACA airfoil section with a 25-percent-chord plain flap are appraised from wind-tunnel tests at Mach numbers from 0.3 to 0.9 and Reynolds numbers varying correspondingly from 1 to 2 million. The airfoil trailing-edge angle was varied from approximately 18 to 6 degrees, and the trailing-edge thickness from zero to the thickness at the flap hinge line.
Technical Note - National Advisory Committee for Aeronautics
Author: United States. National Advisory Committee for Aeronautics
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 442
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 442
Book Description
Numerical Simulation of Power Plants and Firing Systems
Author: Heimo Walter
Publisher: Springer
ISBN: 3709148553
Category : Technology & Engineering
Languages : en
Pages : 851
Book Description
The book comprises the fundamentals of the numerical simulation of fluid flows as well as the modelling of a power plant and plant components. The fundamental equations for heat and mass transfer will be prepared for the application in the numerical simulation. Selected numerical methods will be discussed in detail. The book will deal with the gas as well as with the water/steam flow. Regulation and controller, simplified models and hybrid models as well as the validation of measurement data are also included in the book.
Publisher: Springer
ISBN: 3709148553
Category : Technology & Engineering
Languages : en
Pages : 851
Book Description
The book comprises the fundamentals of the numerical simulation of fluid flows as well as the modelling of a power plant and plant components. The fundamental equations for heat and mass transfer will be prepared for the application in the numerical simulation. Selected numerical methods will be discussed in detail. The book will deal with the gas as well as with the water/steam flow. Regulation and controller, simplified models and hybrid models as well as the validation of measurement data are also included in the book.
List
Author:
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 564
Book Description
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 564
Book Description
Bettis Technical Review
Author:
Publisher:
ISBN:
Category : Nuclear reactors
Languages : en
Pages : 120
Book Description
Publisher:
ISBN:
Category : Nuclear reactors
Languages : en
Pages : 120
Book Description