Alternate Methods of Ironmaking PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Alternate Methods of Ironmaking PDF full book. Access full book title Alternate Methods of Ironmaking by Sujay Kumar Dutta | Rameshwar Sah. Download full books in PDF and EPUB format.
Author: Sujay Kumar Dutta | Rameshwar Sah
Publisher: S. Chand Publishing
ISBN: 8121940583
Category : Technology & Engineering
Languages : en
Pages : 136
Get Book Here
Book Description
This book has been prepared primarily for use by Students studying Ferrous Metallurgy (i.e., Iron and Steelmaking) at UG and PG level of Metallurgical and Materials Engineering, Research workers engaged in obtaining fundamental information in this field, and for Process Metallurgists to understand the processes in general and Sponge Iron Producers in particular. ; It also helps the practicing engineers who wish to apply the theoretical knowledge to the process they are operating. ;The book may very well be introduced as a Textbook for Elective subject in Third/Fourth year of UG programme in Metallurgical & Materials Engineering. ;The book consists of nine chapters in two parts; five chapters in Part-I: Direct Reduction Processes and four chapters in Part-II: Smelting Reduction Processes. In Part-I, the Chapter 1 deals with a brief introduction of the sponge iron and classification of the direct reduction processes with their advantages and limitations. Chapter 2 deals with the raw materials involved in direct reduced ironmaking and their characteristics. In Chapter 3, the physico-chemical principles and thermodynamics of reduction are highlighted. The details of different direct reduction (DR) processes are discussed in Chapter 4. The characteristics and uses of DRI as well as its effect on Electric Arc Furnace performance is discussed in Chapter 5.
Author: Sujay Kumar Dutta | Rameshwar Sah
Publisher: S. Chand Publishing
ISBN: 8121940583
Category : Technology & Engineering
Languages : en
Pages : 136
Get Book Here
Book Description
This book has been prepared primarily for use by Students studying Ferrous Metallurgy (i.e., Iron and Steelmaking) at UG and PG level of Metallurgical and Materials Engineering, Research workers engaged in obtaining fundamental information in this field, and for Process Metallurgists to understand the processes in general and Sponge Iron Producers in particular. ; It also helps the practicing engineers who wish to apply the theoretical knowledge to the process they are operating. ;The book may very well be introduced as a Textbook for Elective subject in Third/Fourth year of UG programme in Metallurgical & Materials Engineering. ;The book consists of nine chapters in two parts; five chapters in Part-I: Direct Reduction Processes and four chapters in Part-II: Smelting Reduction Processes. In Part-I, the Chapter 1 deals with a brief introduction of the sponge iron and classification of the direct reduction processes with their advantages and limitations. Chapter 2 deals with the raw materials involved in direct reduced ironmaking and their characteristics. In Chapter 3, the physico-chemical principles and thermodynamics of reduction are highlighted. The details of different direct reduction (DR) processes are discussed in Chapter 4. The characteristics and uses of DRI as well as its effect on Electric Arc Furnace performance is discussed in Chapter 5.
Author: SARANGI, ARABINDA
Publisher: PHI Learning Pvt. Ltd.
ISBN: 8120351193
Category : Technology & Engineering
Languages : en
Pages : 346
Get Book Here
Book Description
With a boom in the steel industry all over the world today, the demand of sponge iron has considerably increased as a feed (raw) material to steel making. The increase in the demand of sponge iron is also due to the fact that it is used for replacing coke making required for blast furnace processing. The primary objective of this book is to provide the basis, principles, fundamentals and theory of sponge iron production. This book, earlier titled as Sponge Iron Production in Rotary Kiln, is revised as per the feedback from students, faculty members and professionals. It, now, covers broad spectrum of alternative routes of iron making, therefore, the book is renamed as Alternative Routes to Iron Making. In this revised edition of the book, three new chapters have been added to fulfil the requirement of a textbook for various universities. NEW TO THIS EDITION • New chapters on: o Utilization of Sponge Iron o Environmental Pollution and Control in Sponge Iron Industries o Smelting Reduction Process • Inclusion of principle of fluidisation in fluidised bed processes • Description of Hyl III process with recent development of the process Primarily intended for undergraduate and postgraduate students of metal-lurgical engineering, this book is equally beneficial for researchers, and professionals engaged in DR processes and steel industries.
Author: R. D. Walker
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 164
Get Book Here
Book Description
Author: Sujay Kumar Dutta
Publisher: Springer Nature
ISBN: 9811524378
Category : Technology & Engineering
Languages : en
Pages : 644
Get Book Here
Book Description
This book presents the fundamentals of iron and steel making, including the physical chemistry, thermodynamics and key concepts, while also discussing associated problems and solutions. It guides the reader through the production process from start to finish, covers the raw materials, and addresses the types of processes and reactions involved in both conventional and alternative methods. Though primarily intended as a textbook for students of metallurgical engineering, the book will also prove a useful reference for professionals and researchers working in this area.
Author: José Ignacio Verdeja González
Publisher: Springer Nature
ISBN: 3030546063
Category : Technology & Engineering
Languages : en
Pages : 323
Get Book Here
Book Description
This textbook explores the production of pig iron, covering the first part of the steel production process, known as ironmaking. Divided into seven chapters, it discusses the following topics: raw materials for steel production (coking coal, iron ore, slag-forming agents and fluxes, scrap, ferroalloys and pre-reduced materials), the sintering process (used to prepare the burden for the blast furnace), the pelletizing process (used to agglomerate the fine iron ores), the production of coke (the main reductant in the ironmaking process), the production of iron by reduction with gas (an alternative to the blast furnace) and the production of pig iron in the blast furnace (which is used in more than 65% of steel production worldwide). Specially conceived for graduate and undergraduate courses, this book is based on more than 30 years of teaching experience in courses for undergraduates, graduates (master and Ph.D.) and industry professionals (technicians). It explores the recent trends in the iron- and steelmaking process (which might used in the future production of steel), and features 55 worked exercises and real-world problems to complement of the theoretical sections of the text.
Author: AHINDRA GHOSH
Publisher: PHI Learning Pvt. Ltd.
ISBN: 812033289X
Category : Technology & Engineering
Languages : en
Pages : 482
Get Book Here
Book Description
This authoritative account covers the entire spectrum from iron ore to finished steel. It begins by tracing the history of iron and steel production, right from the earlier days to today’s world of oxygen steelmaking, electric steelmaking, secondary steelmaking and continuous casting. The physicochemical fundamental concepts of chemical equilibrium, activity-composition relationships, and structure-properties of molten metals are introduced before going into details of transport phenomena, i.e. kinetics, mixing and mass transfer in ironmaking and steelmaking pro-cesses. Particular emphasis is laid on the understanding of the fundamental principles of the processes and their application to the optimisation of actual processes. Modern developments in blast furnaces, including modelling and process control are discussed along with an introduction to the alternative methods of ironmaking. In the area of steelmaking, BOF plant practice including pre-treatment of hot metal, metallurgical features of oxygen steelmaking processes, and their control form part of the book. It also covers basic open hearth, electric arc furnace and stainless steelmaking, before discussing the area of casting of liquid steel—ingot casting, continuous casting and near net shape casting. The book concludes with a chapter on the status of the ironmaking and steelmaking in India. In line with the application of theoretical principles, several worked-out examples dealing with fundamental principles as applied to actual plant situations are presented. The book is primarily intended for undergraduate and postgraduate students of metallurgical engineering. It would also be immensely useful to researchers in the area of iron and steel.
Author: . Lockwood Greene
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Iron in the United States is largely produced from iron ore mined in the United States or imported from Canada or South America. The iron ore is typically smelted in Blast Furnaces that use primarily iron ore, iron concentrate pellets metallurgical coke, limestone and lime as the raw materials. Under current operating scenarios, the iron produced from these Blast Furnaces is relatively inexpensive as compared to current alternative iron sources, e.g. direct iron reduction, imported pig iron, etc. The primary problem the Blast Furnace Ironmaking approach is that many of these Blast furnaces are relatively small, as compared to the newer, larger Blast Furnaces; thus are relatively costly and inefficient to operate. An additional problem is also that supplies of high-grade metallurgical grade coke are becoming increasingly in short supply and costs are also increasing. In part this is due to the short supply and costs of high-grade metallurgical coals, but also this is due to the increasing necessity for environmental controls for coke production. After year 2003 new regulations for coke product environmental requirement will likely be promulgated. It is likely that this also will either increase the cost of high-quality coke production or will reduce the available domestic U.S. supply. Therefore, iron production in the United States utilizing the current, predominant Blast Furnace process will be more costly and would likely be curtailed due to a coke shortage. Therefore, there is a significant need to develop or extend the economic viability of Alternate Ironmaking Processes to at least partially replace current and declining blast furnace iron sources and to provide incentives for new capacity expansion. The primary conclusions of this comparative Study of Alternative Ironmaking Process scenarios are: (1) The processes with the best combined economics (CAPEX and OPEX impacts in the I.R.R. calculation) can be grouped into those Fine Ore based processes with no scrap charge and those producing Hot Metal for charge to the EAF. (2) A pronounced sensitivity to Steel Scrap Cost was felt less by the Hot Metal Processes and the Fine Ore Processes that typically do not utilize much purchased scrap. (3) In terms of evolving processes, the Tecnored Process (and in particular, the lower-operating cost process with integral co-generation of electrical power) was in the most favorable groupings at all scrap cost sensitivities. (4) It should be noted also that the Conventional Blast Furnace process utilizing Non-Recovery coke (from a continuous coking process with integral co-generation of electrical power) and the lower-capital cost Mini Blast Furnace also showed favorable Relative Economics for the low and median Scrap Cost sensitivities. (5) The lower-cost, more efficient MauMee Rotary Hearth Process that uses a Briquetted Iron Unit Feed (instead of a dried or indurated iron ore pellet) also was in the most favorable process groupings. Those processes with lower-cost raw materials (i.e. fine ore and/or nonmetallurgical coal as the reductant) had favorable combined economics. In addition, the hot metal processes (in part due to the sensible heat impacts in the EAF and due to their inherently lower costs) also had favorable combined economics.
Author:
Publisher: Allied Publishers
ISBN: 9788177641042
Category : Environmental management
Languages : en
Pages : 422
Get Book Here
Book Description
Author: AMIT CHATTERJEE
Publisher: PHI Learning Pvt. Ltd.
ISBN: 8120349474
Category : Technology & Engineering
Languages : en
Pages : 285
Get Book Here
Book Description
This book, in its second edition, continues to offer a comprehensive treatise on smelting reduction of iron oxide—an emerging alternative method of producing hot metal without using coke. This technique is being increasingly used for hot metal production, which has till date, been dominated by the traditional blast furnace method. Shortage of coking coal, high cost of coke and the recent enforcement of stricter environmental regulations have resulted in the advent of smelting reduction as a supplementary method of hot metal production. The book covers the details of this rapidly emerging method that holds particular relevance for countries like India, endowed with relatively large reserves of high grade iron ore but unfortunately, not matched by the availability of coking coal. The book offers an in-depth analysis of the theoretical as well as the practical aspects of smelting reduction. It begins by acquainting the readers with the current worldwide status of ironmaking, followed by the classification of the various smelting reduction processes. It then focuses on explaining the fundamentals of smelting reduction before proceeding with a critical appraisal of the various smelting reduction processes that are currently available. The future of this methodology in India and in the rest of the world is discussed in the concluding chapter. The book contains numerous illustrations to provide a clear understanding of the different processes, equipment and quality parameters relevant to smelting reduction-based ironmaking. The book is intended mainly for undergraduate and postgraduate engineering (particularly metallurgical engineering) students seeking an insight into this emerging ironmaking technology. It would also be of immense interest to researchers and technologists engaged in the subject of smelting reduction of iron oxide. A variety of chapter-end references would enable teachers and students to get acquainted with the extensive knowledge already available in this field. HIGHLIGHTS OF SECOND EDITION • Two new sections on HIsarna process and Circosmelt process have been incorporated. • New figures and tables have been used in some sections to illustrate the concepts with better clarity and give the up-to-date information. • Some references have also been added, making the text suitable for further study.
Author: Rafael Colás
Publisher: CRC Press
ISBN: 1000031675
Category : Technology & Engineering
Languages : en
Pages : 3918
Get Book Here
Book Description
The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail)
[email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail)
[email protected]
