Author: G. W. Harruff
Publisher:
ISBN:
Category :
Languages : en
Pages : 81
Book Description
This report provides the results of qualification tests of in-place fusion-welded fittings for a Type III hydraulic system ( -65 F to 450 F). It describes welding equipment and inspection methods, which include the evaluation of an isotope camera. The fitting material was titanium alloy (Ti) 6Al-4V annealed and the tubing Ti-3Al-2.5V cold worked and stress relieved (CWSR). The tests conducted on the welded joints were tensile, pressure impulse, and burst pressure. The tensile and burst pressure tests were conducted at room temperature and the pressure impulse tests at -65 F and 450 F. Fitting standards for 4150-psi pressure lines and 2075-psi return lines are included. Detail procedures for welding and radiographic inspection are included or referred to. (Author).
Welded Permanent Fittings for Titanium Hydraulic Tubing
Author: G. W. Harruff
Publisher:
ISBN:
Category :
Languages : en
Pages : 81
Book Description
This report provides the results of qualification tests of in-place fusion-welded fittings for a Type III hydraulic system ( -65 F to 450 F). It describes welding equipment and inspection methods, which include the evaluation of an isotope camera. The fitting material was titanium alloy (Ti) 6Al-4V annealed and the tubing Ti-3Al-2.5V cold worked and stress relieved (CWSR). The tests conducted on the welded joints were tensile, pressure impulse, and burst pressure. The tensile and burst pressure tests were conducted at room temperature and the pressure impulse tests at -65 F and 450 F. Fitting standards for 4150-psi pressure lines and 2075-psi return lines are included. Detail procedures for welding and radiographic inspection are included or referred to. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 81
Book Description
This report provides the results of qualification tests of in-place fusion-welded fittings for a Type III hydraulic system ( -65 F to 450 F). It describes welding equipment and inspection methods, which include the evaluation of an isotope camera. The fitting material was titanium alloy (Ti) 6Al-4V annealed and the tubing Ti-3Al-2.5V cold worked and stress relieved (CWSR). The tests conducted on the welded joints were tensile, pressure impulse, and burst pressure. The tensile and burst pressure tests were conducted at room temperature and the pressure impulse tests at -65 F and 450 F. Fitting standards for 4150-psi pressure lines and 2075-psi return lines are included. Detail procedures for welding and radiographic inspection are included or referred to. (Author).
Fittings, Welded, Hydraulic, Titanium, Corrosion Resistant Steel and Nickel, 3000 Psi Hydraulic
Author: G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This document defines the requirements for weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3Al-2.5V titanium, 21Cr-6Ni-9Mn CRES, and 718 nickel alloy tubing. Fitting standards covered by this specification include non-separable welded elbow, tee, and reducer fittings, and reconnectable 24 degree cone fittings such as sleeves and unions. This document was revised to add AMS4945, AMS4946 with min CSR rating for titanium tubing material specification, and removed AS5620.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This document defines the requirements for weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3Al-2.5V titanium, 21Cr-6Ni-9Mn CRES, and 718 nickel alloy tubing. Fitting standards covered by this specification include non-separable welded elbow, tee, and reducer fittings, and reconnectable 24 degree cone fittings such as sleeves and unions. This document was revised to add AMS4945, AMS4946 with min CSR rating for titanium tubing material specification, and removed AS5620.
FITTINGS, WELDED, HYDRAULIC, TITANIUM AND CORROSION RESISTANT STEEL, 3000 PSI HYDRAULIC
Author: G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This specification defines the requirements for weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3A1-2.5V titanium and 21Cr-6Ni-9Mn CRES tubing.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This specification defines the requirements for weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3A1-2.5V titanium and 21Cr-6Ni-9Mn CRES tubing.
Titanium Science and Technology
Author: H. Burte
Publisher: Springer Science & Business Media
ISBN: 1475713460
Category : Technology & Engineering
Languages : en
Pages : 758
Book Description
Publisher: Springer Science & Business Media
ISBN: 1475713460
Category : Technology & Engineering
Languages : en
Pages : 758
Book Description
Reconnectable Titanium Fittings with Weld-Attached Sleeves for the Hydraulic System
Author: G. W. Harruff
Publisher:
ISBN:
Category :
Languages : en
Pages : 55
Book Description
This report covers the results of qualification tests on titanium flareless reconnectable fittings with weld-attached sleeves for a Type III 4150-psi hydraulic system ( -65 F to 450 F). The fitting material was titanium alloy (Ti) 6Al-4V annealed and the tubing Ti-3Al-2.5V cold worked and stress relieved. The tests conducted were tensile, repeated assembly, pressure impulse, flexure, and burst. The tensile, repeated assembly, and burst tests were conducted at room temperature, the pressure impulse tests at -65 F and 450 F, and the flexure test at 450 F. The titanium fitting standards and specification data for fabrication and installation of weld-attached sleeves and fittings are included. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 55
Book Description
This report covers the results of qualification tests on titanium flareless reconnectable fittings with weld-attached sleeves for a Type III 4150-psi hydraulic system ( -65 F to 450 F). The fitting material was titanium alloy (Ti) 6Al-4V annealed and the tubing Ti-3Al-2.5V cold worked and stress relieved. The tests conducted were tensile, repeated assembly, pressure impulse, flexure, and burst. The tensile, repeated assembly, and burst tests were conducted at room temperature, the pressure impulse tests at -65 F and 450 F, and the flexure test at 450 F. The titanium fitting standards and specification data for fabrication and installation of weld-attached sleeves and fittings are included. (Author).
Fittings, Welded, Hydraulic, Titanium and Corrosion Resistant Steel, 21 000 KPa, Metric
Author: G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This aerospace specification defines the requirements for metric weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3A1-2.5V titanium and 21Cr-6Ni-9Mn CRES tubing and associated fittings.This specification is equivalent to AS1576 except for metric dimensions and standards.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This aerospace specification defines the requirements for metric weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3A1-2.5V titanium and 21Cr-6Ni-9Mn CRES tubing and associated fittings.This specification is equivalent to AS1576 except for metric dimensions and standards.
FITTINGS, WELDED, HYDRAULIC, TITANIUM AND CORROSION RESISTANT STEEL, 20000 KPa, METRIC
Author: G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This specification defines the requirements for metric weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3Al-2.5V titanium and 21Cr-6Ni-9Mn CRES tubing and associated fittings.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
This specification defines the requirements for metric weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3Al-2.5V titanium and 21Cr-6Ni-9Mn CRES tubing and associated fittings.
Aerospace Hydraulic Systems
Author: Wayne Stout, Phd
Publisher: DesignAerospace LLC
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 395
Book Description
The book addresses hydraulic system operation and design from an aerospace perspective. The book covers issues of fluids and fluid flow, component operation and system design. Component sizing methods, mathematical relationships and modeling equations are presented for each component. A methodology for system level modeling and simulation is also presented. Numerous examples and worked sample problems are included.
Publisher: DesignAerospace LLC
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 395
Book Description
The book addresses hydraulic system operation and design from an aerospace perspective. The book covers issues of fluids and fluid flow, component operation and system design. Component sizing methods, mathematical relationships and modeling equations are presented for each component. A methodology for system level modeling and simulation is also presented. Numerous examples and worked sample problems are included.
Notices of Changes in Classification, Distribution and Availability
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 428
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 428
Book Description
RING, TUBE WELD, 3000 PSI HYDRAULIC, TITANIUM
Author: G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description