Author: Norman Bailey
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 36

Get Book Here

Book Description

Author: Norman Bailey
Publisher: Elsevier
ISBN: 1845698932
Category : Technology & Engineering
Languages : en
Pages : 299

Get Book Here

Book Description
This book is chiefly concerned with the conventional fusion welding processes and their problems and will be of value to practical welding engineers, inspectors and metallurgists. The author also has inmind the needs of those concerned with design and specification, recognising the importance of dealing with problems at the design stage.

Author: Norman Bailey
Publisher: Woodhead Publishing
ISBN: 9781855730144
Category : Technology & Engineering
Languages : en
Pages : 306

Get Book Here

Book Description
A comprehensive guide to avoiding hydrogen cracking which serves as an essential problem-solver for anyone involved in the welding of ferritic steels. The authors provide a lucid and thorough explanation of the theoretical background to the subject but the main emphasis throughout is firmly on practice.

Author: J. G. Garland
Publisher:
ISBN:
Category : Fracture mechanics
Languages : en
Pages :

Get Book Here

Book Description

Author: J. G. Garland
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

Get Book Here

Book Description
The effects of C,S,P and Mn on the solidification cracking of submerged-arc welds have been examined in a full factorial experiment using the Transvare-straint test.

Author: Thomas Böllinghaus
Publisher: Springer Science & Business Media
ISBN: 3540786287
Category : Technology & Engineering
Languages : en
Pages : 458

Get Book Here

Book Description
Failure of welded components can occur during service as well as during fabrication. Most common, analyses of the resistance of welded components against failure are targeted at crack avoidance. Such evaluations are increasingly carried out by modern weldability studies, i. e. considering interactions between the selected base and filler materials, structural design and welding process. Such weldability investigations are particularly targeted to prevent hot cracking, as one of the most common cracking phenomena occurring during weld fabrication. To provide an international information and discussion platform to combat hot cracking, an international workshop on Hot Cracking Phenomena in Welds has been created, based on an initiative of the Institute for Materials and Joining Technology at the Otto-von-Guericke University in Magdeburg and the Division V. 5 – Safety of Joined Components at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany. The first workshop was organized in Berlin under the topics mechanisms and phenomena, metallurgy and materials, modelling and simulations as well as testing and standardization. It consisted of 20 individual contributions from eight countries, which were compiled in a book that found a very ready market, not only in the welding community. As a consequence of increasing interest, it has been decided to establish the Workshop on Hot Cracking Phenomena in Welds as a regular event every three years embedded in the International Institute of Welding (IIW). Attached to the IIW Commission IX and II Spring intermediate meetings, the second workshop was organized in March 2007.

Author: J. G. Garland
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

Get Book Here

Book Description
The resistance to solidification cracking during the submerged arc welding of eight commercial steels has been assessed by means of the Transvarestraint test using the same welding consumables and conditions as were used to develop.

Author: J. G. Garland
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

Get Book Here

Book Description
The effects of C, S, P, Mn, A1, Nb and Si at two levels on the susceptibility to solidification cracking of submerged arc welds have been assessed in a quarter factorial experiment using the Transvarestraint test.

Author: Thomas Böllinghaus
Publisher: Springer
ISBN: 3319284347
Category : Technology & Engineering
Languages : en
Pages : 502

Get Book Here

Book Description
This is the fourth volume in the well-established series of compendiums devoted to the subject of weld hot cracking. It contains the papers presented at the 4th International Cracking Workshop held in Berlin in April 2014. In the context of this workshop, the term “cracking” refers to hot cracking in the classical and previous sense, but also to cold cracking, stress-corrosion cracking and elevated temp. solid-state cracking. A variety of different cracking subjects are discussed, including test standards, crack prediction, weldability determination, crack mitigation, stress states, numerical modelling, and cracking mechanisms. Likewise, many different alloys were investigated such as aluminum alloys, copper-aluminum dissimilar metal, austenitic stainless steel, nickel base alloys, duplex stainless steel, creep resistant steel, and high strength steel.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 36

Get Book Here

Book Description
Solidification cracking in submerged arc welding is influenced mainly bycomposition, and it is particularly pronounced with high levels of impurityelements. This study reviews the mechanisms responsible for crack formation,the influence of alloying elements on solidification cracking, and discussesways in which cracking can be prevented in practice. As an example of anexperimental approach used to address solidification cracking, this work alsoincludes results of Transvarestraint tests conducted using several flux/wirecombinations recommended for welding low-ally, CMn steels.