Simulations of Longitudinal Beam Dynamics of Space-charge Dominated Beams for Heavy Ion Fusion PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Simulations of Longitudinal Beam Dynamics of Space-charge Dominated Beams for Heavy Ion Fusion PDF full book. Access full book title Simulations of Longitudinal Beam Dynamics of Space-charge Dominated Beams for Heavy Ion Fusion by Debra Ann Callahan Miller. Download full books in PDF and EPUB format.
Author: Debra Ann Callahan Miller
Publisher:
ISBN:
Category :
Languages : en
Pages : 252
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 114
Get Book Here
Book Description
The longitudinal instability has potentially disastrous effects on the ion beams used for heavy ion driven inertial confinement fusion. This instability is a {open_quotes}resistive wall{close_quotes} instability with the impedance coining from the induction modules in the accelerator used as a driver. This instability can greatly amplify perturbations launched from the beam head and can prevent focusing of the beam onto the small spot necessary for fusion. This instability has been studied using the WARPrz particle-in-cell code. WARPrz is a 2 1/2 dimensional electrostatic axisymmetric code. This code includes a model for the impedance of the induction modules. Simulations with resistances similar to that expected in a driver show moderate amounts of growth from the instability as a perturbation travels from beam head to tail as predicted by cold beam fluid theory. The perturbation reflects off the beam tail and decays as it travels toward the beam head. Nonlinear effects cause the perturbation to steepen during reflection. Including the capacitive component of the, module impedance. has a partially stabilizing effect on the longitudinal instability. This reduction in the growth rate is seen in both cold beam fluid theory and in simulations with WARPrz. Instability growth rates for warm beams measured from WARPrz are lower than cold beam fluid theory predicts. Longitudinal thermal spread cannot account for this decrease in the growth rate. A mechanism for coupling the transverse thermal spread to decay of the longitudinal waves is presented. The longitudinal instability is no longer a threat to the heavy ion fusion program. The simulations in this thesis have shown that the growth rate for this instability will not be as large as earlier calculations predicted.
Author: Debra Ann Callahan Miller
Publisher:
ISBN:
Category :
Languages : en
Pages : 252
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 129
Get Book Here
Book Description
Heavy ion fusion requires injection, transport and acceleration of high current beams. Detailed simulation of such beams requires fully self-consistent space charge fields and three dimensions. WARP3D, developed for this purpose, is a particle-in-cell plasma simulation code optimized to work within the framework of an accelerator's lattice of accelerating, focusing, and bending elements. The code has been used to study several test problems and for simulations and design of experiments. Two applications are drift compression experiments on the MBE-4 facility at LBL and design of the electrostatic quadrupole injector for the proposed ILSE facility. With aggressive drift compression on MBE-4, anomalous emittance growth was observed. Simulations carried out to examine possible causes showed that essentially all the emittance growth is result of external forces on the beam and not of internal beam space-charge fields. Dominant external forces are the dodecapole component of focusing fields, the image forces on the surrounding pipe and conductors, and the octopole fields that result from the structure of the quadrupole focusing elements. Goal of the design of the electrostatic quadrupole injector is to produce a beam of as low emittance as possible. The simulations show that the dominant effects that increase the emittance are the nonlinear octopole fields and the energy effect (fields in the axial direction that are off-axis). Injectors were designed that minimized the beam envelope in order to reduce the effect of the nonlinear fields. Alterations to the quadrupole structure that reduce the nonlinear fields further were examined. Comparisons were done with a scaled experiment resulted in very good agreement.
Author: David Peter Grote
Publisher:
ISBN:
Category : Inertial confinement fusion
Languages : en
Pages : 284
Get Book Here
Book Description
Author: Yuri K. Batygin
Publisher: American Institute of Physics
ISBN:
Category : Medical
Languages : en
Pages : 242
Get Book Here
Book Description
Fusion is a combining of atoms to form other atoms, which occurs when their nuclei get close enough to each other. The energy that powers the sun actually comes from nuclear fusion. The realization of fusion in laboratory conditions requires 1000 trillion watts of a charged particle beam over a period of approx. 10 billionth of a second (10 nanoseconds) to ignite a target of thermonuclear fuel. Due to natural repulsion of particles via Coulomb forces, beam space charge effects remain the key problem for designers of high intensity accelerators for heavy ion fusion. The subject of the RIKEN Symposium was to review the present understanding of space charge phenomena and to discuss possible solutions for unresolved problems.
Author: R. C. Davidson
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Over the past two years noteworthy experimental and theoretical progress has been made towards the top-level scientific question for the U.S. program in Heavy Ion Fusion Science and High Energy Density Physics: ''How can heavy ion beams be compressed to the high intensity required to create high energy density matter and fusion conditions''? [1]. New results in transverse and longitudinal beam compression, beam-target interaction, high-brightness transport, beam production, as well as a new scheme in beam acceleration will be reported. Longitudinal and Transverse Beam Compression: The Neutralized Transport Experiment (NTX) demonstrated transverse beam density enhancement by a factor greater than 100 when an otherwise space-charge dominated ion beam was neutralized by a plasma source [2]. This experiment was followed by the Neutralized Drift Compression Experiment (NDCX) in which an ion beam was longitudinally compressed by a factor of 50 [3]. This was accomplished by applying a linear head-to-tail velocity ''tilt'' to the beam, and then allowing the beam to drift through a meter-long neutralizing plasma. In both the transverse and longitudinal experiments, extensive 3-D simulations, using LSP, were carried out, and the agreement with experiments was excellent [4]. A three-dimensional kinetic model for longitudinal compression was developed, and it was shown that the Vlasov equation possesses a class of exact solutions for the problem [5]. Beam-Target Interaction: We have also made significant progress in identifying the unique role ion beams can play in heating material to warm dense matter (WDM) conditions. We have identified promising accelerator, beam, and target configurations, as well as new experiments on material properties. It is shown that the target temperature uniformity can be maximized if the ion energy at target corresponds to the maximum in the energy loss rate dE/dX [6]. Ions of moderate energy (a few to tens of MeV) may be used. The energy must be deposited in times much shorter than the hydrodynamic expansion time (ns for metallic foams at 0.01 to 0.1 times solid density). Hydrodynamic simulations [7] have confirmed that uniform conditions with temperature variations of less than a few per cent can be achieved. High-Brightness Transport: Unwanted electrons can lead to deleterious effects for high-brightness ion beam transport. We are studying electron accumulation in quadrupole and solenoid beam transport systems. Electrons can originate from background gas ionization, from beam-tubes struck by ions near grazing incidence, and from end-walls struck by ions near normal incidence [8]. In parallel with the experimental campaign, we have developed and implemented in WARP 3D a new approach to large time-step advancement of electron orbits, as well as a comprehensive suite of models for electrons, gas, and wall interactions [9]. If sufficient electrons are accumulated within the beam, severe distortion of the beam phase space can result. Simulations of this effect have reproduced the key features observed in the experiments. Beam Production: The merging-beamlet injector experiment recently completed demonstrates the feasibility of a compact, high-current injector for heavy ion fusion drivers. In our experiment, 119 argon ion beamlets at 400 keV beam energy were merged into an electrostatic quadrupole channel to form a single beam of 70 mA. The measured unnormalized transverse emittance (phase space area) of 200-250 mm-mrad for the merged beam met fusion driver requirement. These measurements are in good agreement with our particle-in-cell simulations using WARP3D [10]. We have also completed the physics design of a short-pulse injector suitable for WDM studies. Beam Acceleration: A new concept for acceleration, the Pulse Line Ion Accelerator PLIA [11], offers the potential of a very low cost accelerator for WDM studies. It is based on a traveling wave structure, using a simple geometry with a helical conductor. We have obtained experimental verification of the predicted PLIA beam dynamics. Measured energy gain, longitudinal phase space, and beam bunching are in good agreement with WARP3D simulations. Computational Models and Simulator Experiments: The pioneering merger of Adaptive Mesh Refinement and particle-in-cell methods [12] underlies much of the recent success of WARP3D. BEST, the Beam Equilibrium Stability and Transport code was optimized for massively parallel computers and applied to studies of the collective effects of 3D bunched beams [13] and the temperature-anisotropy instability [14]. Space-charge-dominated beam physics experiments relevant to long-path accelerators were carried out on the recently completed University of Maryland Electron Ring, and on the Paul Trap Simulator Experiment at PPPL.
Author: Martin Reiser
Publisher: John Wiley & Sons
ISBN: 3527622055
Category : Science
Languages : en
Pages : 674
Get Book Here
Book Description
This indispensable work offers a broad synoptic description of beams, applicable to a wide range of other devices, such as low-energy focusing and transport systems and high-power microwave sources. The monograph develops the material from the basic principles in a systematic way and discusses the underlying physics and validity of theoretical relationships, design formulas and scaling laws. Assumptions and approximations are clearly indicated throughout. This new, revised and updated edition has 10% additional content, and features, among others, a new chapter on beam physics research from 1993 to 2007, significant enhancement of chapter 6 on emittance variation, updated references and color image plates.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
This report describes modeling of intense electron and ion beams in the space charge dominated regime. Space charge collective modes play an important role in the transport of intense beams over long distances. These modes were first observed in particle-in-cell simulations. The work presented here is closely tied to the University of Maryland Electron Ring (UMER) experiment and has application to accelerators for heavy ion beam fusion.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 8
Get Book Here
Book Description
The development of a high current, heavy-ion beam for inertial confinement fusion requires a detailed understanding of the behavior of the beam, including effects of the large self-fields. This necessity makes particle-in-cell (PIC) simulation the appropriate tool, and for this reason, the three-dimensional PIC/accelerator code WARP3d is being developed. WARP3d has been used extensively to study the creation and propagation of ion beams both to support experiments and for the understanding of basic beam physics. An overview of the structure of the code is presented along with a discussion of features that make the code an effective tool in the understanding of space-charge dominated beam behavior. A number of applications where WARP3d has played an important role is discussed, emphasizing the need of three-dimensional, first principles simulations. Results and comparisons with experiment are presented.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 8
Get Book Here
Book Description
