Simulation Techniques and Solutions for Mixed-Signal Coupling in Integrated Circuits PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Simulation Techniques and Solutions for Mixed-Signal Coupling in Integrated Circuits PDF full book. Access full book title Simulation Techniques and Solutions for Mixed-Signal Coupling in Integrated Circuits by Nishath K. Verghese. Download full books in PDF and EPUB format.
Author: Nishath K. Verghese
Publisher: Springer Science & Business Media
ISBN: 1461522390
Category : Technology & Engineering
Languages : en
Pages : 297
Get Book
Book Description
The goal of putting `systems on a chip' has been a difficult challenge that is only recently being met. Since the world is `analog', putting systems on a chip requires putting analog interfaces on the same chip as digital processing functions. Since some processing functions are accomplished more efficiently in analog circuitry, chips with a large amount of analog and digital circuitry are being designed. Whether a small amount of analog circuitry is combined with varying amounts of digital circuitry or the other way around, the problem encountered in marrying analog and digital circuitry are the same but with different scope. Some of the most prevalent problems are chip/package capacitive and inductive coupling, ringing on the RLC tuned circuits that form the chip/package power supply rails and off-chip drivers and receivers, coupling between circuits through the chip substrate bulk, and radiated emissions from the chip/package interconnects. To aggravate the problems of designers who have to deal with the complexity of mixed-signal coupling there is a lack of verification techniques to simulate the problem. In addition to considering RLC models for the various chip/package/board level parasitics, mixed-signal circuit designers must also model coupling through the common substrate when simulating ICs to obtain an accurate estimate of coupled noise in their designs. Unfortunately, accurate simulation of substrate coupling has only recently begun to receive attention, and techniques for the same are not widely known. Simulation Techniques and Solutions for Mixed-Signal Coupling in Integrated Circuits addresses two major issues of the mixed-signal coupling problem -- how to simulate it and how to overcome it. It identifies some of the problems that will be encountered, gives examples of actual hardware experiences, offers simulation techniques, and suggests possible solutions. Readers of this book should come away with a clear directive to simulate their design for interactions prior to building the design, versus a `build it and see' mentality.
Author: Nishath K. Verghese
Publisher: Springer Science & Business Media
ISBN: 1461522390
Category : Technology & Engineering
Languages : en
Pages : 297
Get Book
Book Description
The goal of putting `systems on a chip' has been a difficult challenge that is only recently being met. Since the world is `analog', putting systems on a chip requires putting analog interfaces on the same chip as digital processing functions. Since some processing functions are accomplished more efficiently in analog circuitry, chips with a large amount of analog and digital circuitry are being designed. Whether a small amount of analog circuitry is combined with varying amounts of digital circuitry or the other way around, the problem encountered in marrying analog and digital circuitry are the same but with different scope. Some of the most prevalent problems are chip/package capacitive and inductive coupling, ringing on the RLC tuned circuits that form the chip/package power supply rails and off-chip drivers and receivers, coupling between circuits through the chip substrate bulk, and radiated emissions from the chip/package interconnects. To aggravate the problems of designers who have to deal with the complexity of mixed-signal coupling there is a lack of verification techniques to simulate the problem. In addition to considering RLC models for the various chip/package/board level parasitics, mixed-signal circuit designers must also model coupling through the common substrate when simulating ICs to obtain an accurate estimate of coupled noise in their designs. Unfortunately, accurate simulation of substrate coupling has only recently begun to receive attention, and techniques for the same are not widely known. Simulation Techniques and Solutions for Mixed-Signal Coupling in Integrated Circuits addresses two major issues of the mixed-signal coupling problem -- how to simulate it and how to overcome it. It identifies some of the problems that will be encountered, gives examples of actual hardware experiences, offers simulation techniques, and suggests possible solutions. Readers of this book should come away with a clear directive to simulate their design for interactions prior to building the design, versus a `build it and see' mentality.
Author: Stéphane Donnay
Publisher: Springer Science & Business Media
ISBN: 0306481707
Category : Technology & Engineering
Languages : en
Pages : 311
Get Book
Book Description
This book is the first in a series of three dedicated to advanced topics in Mixed-Signal IC design methodologies. It is one of the results achieved by the Mixed-Signal Design Cluster, an initiative launched in 1998 as part of the TARDIS project, funded by the European Commission within the ESPRIT-IV Framework. This initiative aims to promote the development of new design and test methodologies for Mixed-Signal ICs, and to accelerate their adoption by industrial users. As Microelectronics evolves, Mixed-Signal techniques are gaining a significant importance due to the wide spread of applications where an analog front-end is needed to drive a complex digital-processing subsystem. In this sense, Analog and Mixed-Signal circuits are recognized as a bottleneck for the market acceptance of Systems-On-Chip, because of the inherent difficulties involved in the design and test of these circuits. Specially, problems arising from the use of a common substrate for analog and digital components are a main limiting factor. The Mixed-Signal Cluster has been formed by a group of 11 Research and Development projects, plus a specific action to promote the dissemination of design methodologies, techniques, and supporting tools developed within the Cluster projects. The whole action, ending in July 2002, has been assigned an overall budget of more than 8 million EURO.
Author: Ahmed Helmy
Publisher: Springer Science & Business Media
ISBN: 1402081669
Category : Technology & Engineering
Languages : en
Pages : 129
Get Book
Book Description
The book reports modeling and simulation techniques for substrate noise coupling effects in RFICs and introduces isolation structures and design guides to mitigate such effects with the ultimate goal of enhancing the yield of RF and mixed signal SoCs. The book further reports silicon measurements, and new test and noise isolation structures. To the authors’ knowledge, this is the first title devoted to the topic of substrate noise coupling in RFICs as part of a large SoC.
Author: Balsha R. Stanisic
Publisher: Springer Science & Business Media
ISBN: 9780792397342
Category : Computers
Languages : en
Pages : 240
Get Book
Book Description
The move to higher levels of integration has increased the fraction of application-specific integrated circuit (ASIC) designs containing both analog and digital circuits. While the die area for the analog portion of these chips is modest, the design time is often significant. This has motivated the development of automated analog physical design tools for cell-level place-and-route and system-level signal-integrity-routing. To date, there is no tool that has specifically addressed the critical design task of synthesizing the power distribution for the analog portion of an analog or mixed-signal ASIC. Synthesis of Power Distribution to Manage Signal Integrity in Mixed-Signal ICs describes algorithms for analog power distribution synthesis and demonstrates their effectiveness. Existing digital power bus synthesis algorithms have failed to address critical concerns for analog circuitry, thus yielding unacceptable results. These tools synthesize only the bus component of power distribution networks and only consider simplified DC aspects of macros and busses. Readers of the companion book in this series, Simulation Techniques and Solutions for Mixed-Signal Coupling in Integrated Circuits (Kluwer Academic Publishers), already recognize the inadequacy of this simplified view of the noise and power distribution problem in mixed-signal integrated circuits. Synthesis of Power Distribution to Manage Signal Integrity in Mixed-Signal ICs addresses power distribution synthesis for mixed-signal integrated circuits. Several key challenges in power distribution design are identified and automated methods to overcome them are described. This book presents a new formulation for the analog power distribution synthesis problem which synthesizes both the power busses power I/O cell assignment by evaluating DC, AC, and transient interaction between the macros, busses, chip substrate, and package. Furthermore, algorithms are introduced which simultaneously optimize power I/O cell assignment, macro cell substrate coupling, power bus topology selection and power bus sizing. Synthesis of Power Distribution to Manage Signal Integrity in Mixed-Signal ICs will be of interest to CAD designers and researchers specializing in physical design, modelling and circuit synthesis.
Author: X. Aragones
Publisher: Springer Science & Business Media
ISBN: 1475730136
Category : Technology & Engineering
Languages : en
Pages : 242
Get Book
Book Description
Modern microelectronic design is characterized by the integration of full systems on a single die. These systems often include large high performance digital circuitry, high resolution analog parts, high driving I/O, and maybe RF sections. Designers of such systems are constantly faced with the challenge to achieve compatibility in electrical characteristics of every section: some circuitry presents fast transients and large consumption spikes, whereas others require quiet environments to achieve resolutions well beyond millivolts. Coupling between those sections is usually unavoidable, since the entire system shares the same silicon substrate bulk and the same package. Understanding the way coupling is produced, and knowing methods to isolate coupled circuitry, and how to apply every method, is then mandatory knowledge for every IC designer. Analysis and Solutions for Switching Noise Coupling in Mixed-Signal ICs is an in-depth look at coupling through the common silicon substrate, and noise at the power supply lines. It explains the elementary knowledge needed to understand these phenomena and presents a review of previous works and new research results. The aim is to provide an understanding of the reasons for these particular ways of coupling, review and suggest solutions to noise coupling, and provide criteria to apply noise reduction. Analysis and Solutions for Switching Noise Coupling in Mixed-Signal ICs is an ideal book, both as introductory material to noise-coupling problems in mixed-signal ICs, and for more advanced designers facing this problem.
Author: Xavier Aragones
Publisher: Springer
ISBN: 9781441950857
Category : Technology & Engineering
Languages : en
Pages : 0
Get Book
Book Description
Modern microelectronic design is characterized by the integration of full systems on a single die. These systems often include large high performance digital circuitry, high resolution analog parts, high driving I/O, and maybe RF sections. Designers of such systems are constantly faced with the challenge to achieve compatibility in electrical characteristics of every section: some circuitry presents fast transients and large consumption spikes, whereas others require quiet environments to achieve resolutions well beyond millivolts. Coupling between those sections is usually unavoidable, since the entire system shares the same silicon substrate bulk and the same package. Understanding the way coupling is produced, and knowing methods to isolate coupled circuitry, and how to apply every method, is then mandatory knowledge for every IC designer. Analysis and Solutions for Switching Noise Coupling in Mixed-Signal ICs is an in-depth look at coupling through the common silicon substrate, and noise at the power supply lines. It explains the elementary knowledge needed to understand these phenomena and presents a review of previous works and new research results. The aim is to provide an understanding of the reasons for these particular ways of coupling, review and suggest solutions to noise coupling, and provide criteria to apply noise reduction. Analysis and Solutions for Switching Noise Coupling in Mixed-Signal ICs is an ideal book, both as introductory material to noise-coupling problems in mixed-signal ICs, and for more advanced designers facing this problem.
Author: Jari Nurmi
Publisher: Springer Science & Business Media
ISBN: 1402078366
Category : Technology & Engineering
Languages : en
Pages : 450
Get Book
Book Description
In Interconnect-centric Design for Advanced SoC and NoC, we have tried to create a comprehensive understanding about on-chip interconnect characteristics, design methodologies, layered views on different abstraction levels and finally about applying the interconnect-centric design in system-on-chip design. Traditionally, on-chip communication design has been done using rather ad-hoc and informal approaches that fail to meet some of the challenges posed by next-generation SOC designs, such as performance and throughput, power and energy, reliability, predictability, synchronization, and management of concurrency. To address these challenges, it is critical to take a global view of the communication problem, and decompose it along lines that make it more tractable. We believe that a layered approach similar to that defined by the communication networks community should also be used for on-chip communication design. The design issues are handled on physical and circuit layer, logic and architecture layer, and from system design methodology and tools point of view. Formal communication modeling and refinement is used to bridge the communication layers, and network-centric modeling of multiprocessor on-chip networks and socket-based design will serve the development of platforms for SoC and NoC integration. Interconnect-centric Design for Advanced SoC and NoC is concluded by two application examples: interconnect and memory organization in SoCs for advanced set-top boxes and TV, and a case study in NoC platform design for more generic applications.
Author: Luciano Lavagno
Publisher: CRC Press
ISBN: 1420007955
Category : Technology & Engineering
Languages : en
Pages : 608
Get Book
Book Description
Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.
Author: José Luis Huertas
Publisher: Springer Science & Business Media
ISBN: 9781402077241
Category : Technology & Engineering
Languages : en
Pages : 316
Get Book
Book Description
Test and Design-for-Testability in Mixed-Signal Integrated Circuits deals with test and design for test of analog and mixed-signal integrated circuits. Especially in System-on-Chip (SoC), where different technologies are intertwined (analog, digital, sensors, RF); test is becoming a true bottleneck of present and future IC projects. Linking design and test in these heterogeneous systems will have a tremendous impact in terms of test time, cost and proficiency. Although it is recognized as a key issue for developing complex ICs, there is still a lack of structured references presenting the major topics in this area. The aim of this book is to present basic concepts and new ideas in a manner understandable for both professionals and students. Since this is an active research field, a comprehensive state-of-the-art overview is very valuable, introducing the main problems as well as the ways of solution that seem promising, emphasizing their basis, strengths and weaknesses. In essence, several topics are presented in detail. First of all, techniques for the efficient use of DSP-based test and CAD test tools. Standardization is another topic considered in the book, with focus on the IEEE 1149.4. Also addressed in depth is the connecting design and test by means of using high-level (behavioural) description techniques, specific examples are given. Another issue is related to test techniques for well-defined classes of integrated blocks, like data converters and phase-locked-loops. Besides these specification-driven testing techniques, fault-driven approaches are described as they offer potential solutions which are more similar to digital test methods. Finally, in Design-for-Testability and Built-In-Self-Test, two other concepts that were taken from digital design, are introduced in an analog context and illustrated for the case of integrated filters. In summary, the purpose of this book is to provide a glimpse on recent research results in the area of testing mixed-signal integrated circuits, specifically in the topics mentioned above. Much of the work reported herein has been performed within cooperative European Research Projects, in which the authors of the different chapters have actively collaborated. It is a representative snapshot of the current state-of-the-art in this emergent field.
Author: Thomas Noulis
Publisher: CRC Press
ISBN: 1138031615
Category : Technology & Engineering
Languages : en
Pages : 519
Get Book
Book Description
Noise Coupling is the root-cause of the majority of Systems on Chip (SoC) product fails. The book discusses a breakthrough substrate coupling analysis flow and modelling toolset, addressing the needs of the design community. The flow provides capability to analyze noise components, propagating through the substrate, the parasitic interconnects and the package. Using this book, the reader can analyze and avoid complex noise coupling that degrades RF and mixed signal design performance, while reducing the need for conservative design practices. With chapters written by leading international experts in the field, novel methodologies are provided to identify noise coupling in silicon. It additionally features case studies that can be found in any modern CMOS SoC product for mobile communications, automotive applications and readout front ends.
