Author: Marco Tacchini
Publisher: John Wiley & Sons
ISBN: 1119789052
Category : Technology & Engineering
Languages : en
Pages : 356
Get Book Here
Book Description
FUNCTIONAL SAFETY OF MACHINERY Enables readers to understand ISO 13849-1 and IEC 62061 standards and provides a practical approach to functional safety in machinery design Functional Safety of Machinery: How to Apply ISO 13849-1 and IEC 62061 introduces functional safety of machinery as a single unified approach, despite the existence of two standards. Aligning with the latest updates of ISO 13849-1 and IEC 62061, the book explains the intent behind the standards and the mathematical basis on which they are written, details the differences between the two standards, and prescribes ways to put them into practice. To aid in seamless reader comprehension, detailed examples are included throughout the book which walk readers through concepts like Random and Systematic Failures, High and Low demand mode of operation, Diagnostic Coverage, and Safe Failure Fraction. Other sample topics covered within the book include: Basics of reliability engineering and functional safety Roles of the standards in the design and evaluation of safety functions Description of the Main Parameters used in the two standards How to deal with Low Demand Safety Systems The Categories of ISO 13849-1 and the Basic Subsystem Architectures of IEC 62061 How Categories and Architectures can be validated Machinery design engineers, machinery manufacturers, and professionals in system and industrial safety fields can use this book as a one-stop resource to understand the specifics and applications of ISO 13849-1 and IEC 62061.
Author: John Ridley
Publisher: Routledge
ISBN: 1136367489
Category : Technology & Engineering
Languages : en
Pages : 308
Get Book Here
Book Description
John Ridley and Dick Pearce, both recognized specialists in machinery safety, guide the reader through the various standards, regulations and best practices relating to the safe design and use of machinery and show which standard is relevant for which type of machine. Safety with Machinery provides a basic grounding in machinery safety and covers safeguarding philosophy and strategy, typical hazards, risk assessment and reduction, guarding techniques, ergonomic considerations, safe use of equipment and plant layout. All types of safeguards are discussed – mechanical, interlocking, electrical / electronic / programmable, hydraulic, pneumatic. The new edition has been updated throughout in line with changes in regulations and standards. The section on electric, electronic and programmable safety systems has been expanded to reflect their increasing importance. The book now focuses on the harmonised standards (e.g. EN ISO 13849, IEC/EN 61131-2) which can be used by manufacturers to self-certify their machines for the European market without the need for third party examination, but also covers other relevant standards (e.g. IEC 62061). Many practical examples set the regulations in context and assist in the interpretation of the various standards. Safety with Machinery is essential reading for all engineers involved in machinery design and maintenance all over the world as every machine sold within or into the EU needs to conform to the harmonised standards. It also provides health and safety professionals, students and employee representatives, as well as certification bodies, health and safety inspectors and safety regulators with a comprehensive overview of machinery safety.
Author: Management Association, Information Resources
Publisher: IGI Global
ISBN: 1466619465
Category : Technology & Engineering
Languages : en
Pages : 2090
Get Book Here
Book Description
Industrial engineering affects all levels of society, with innovations in manufacturing and other forms of engineering oftentimes spawning cultural or educational shifts along with new technologies. Industrial Engineering: Concepts, Methodologies, Tools, and Applications serves as a vital compendium of research, detailing the latest research, theories, and case studies on industrial engineering. Bringing together contributions from authors around the world, this three-volume collection represents the most sophisticated research and developments from the field of industrial engineering and will prove a valuable resource for researchers, academics, and practitioners alike.
Author: Hauke, M.
Publisher: DGUV/IFA
ISBN: 3864232325
Category : Technology & Engineering
Languages : en
Pages : 324
Get Book Here
Book Description
The EN ISO 13849-1 standard, “Safety of machinery – Safety-related parts of control systems”, contains provisions governing the design of such parts. This report is an update of BGIA Report 2/2008e of the same name. It describes the essential subject-matter of the standard in its third, revised 2015 edition, and explains its application with reference to numerous examples from the fields of electromechanics, fluidics, electronics and programmable electronics, including control systems employing mixed technologies. The standard is placed in its context of the essential safety requirements of the Machinery Directive, and possible methods for risk assessment are presented. Based upon this information, the report can be used to select the required Performance Level PLr for safety functions in control systems. The Performance Level PL which is actually attained is explained in detail. The requirements for attainment of the relevant Performance Level and its associated Categories, component reliability, levels of diagnostic coverage, software safety and measures for the prevention of systematic and common-cause failures are all discussed comprehensively. Background information is also provided on implementation of the requirements in real-case control systems. Numerous example circuits show, down to component level, how Performance Levels a to e can be engineered in the selected technologies with Categories B to 4. The examples provide information on the safety principles employed and on components with well-tried safety functionality. Numerous literature references permit closer study of the examples provided. The report shows how the requirements of EN ISO 13849-1 can be implemented in engineering practice, and thus makes a contribution to consistent application and interpretation of the standard at national and international level.
Author: Codeofchina.com
Publisher: www.codeofchina.com
ISBN:
Category : Architecture
Languages : en
Pages : 40
Get Book Here
Book Description
GB 28241-2012 Dense Shaped Refractory Products-Determination of Cold Compressive Strength ― Part 2: Test with Packing English-translated version
Author: https://www.codeofchina.com
Publisher: https://www.codeofchina.com
ISBN:
Category : Architecture
Languages : en
Pages : 87
Get Book Here
Book Description
This standard specifies the outlined details of safety of machinery standards. This standard may help the designers and manufacturers of machinery and associated equipment, particularly where specific Category C standard is unavailable, to correctly understand relevant safety of machinery standards. Note: this standard does not cover the contents of Category C standards.
Author: David Macdonald
Publisher: Elsevier
ISBN: 0080480233
Category : Technology & Engineering
Languages : en
Pages : 300
Get Book Here
Book Description
Practical Machinery Safety aims to provide you with the knowledge to tackle machinery safety control problems at a practical level whilst achieving compliance with national and international standards. The book highlights the major international standards that are used to support compliance with EU regulations and uses these standards as a basis for the design procedures. It looks at the risk assessment processes used to identify hazards and to quantify the risks inherent in a machine. It introduces the concepts of safety categories as defined by standard EN954-1 (Safety of Machinery) and illustrates the principles of failsafe design, fault tolerance and self-testing. It also provides an introduction to machinery protection devices such as guards, enclosures with interlocks and guard-monitoring relays, locking systems, safety mats, photo-electric and electro-sensitive principles and the application of light curtains, a study of Safety Control System techniques, and introduces the principles of safety-certified PLCs. - Plan and implement safety systems that deliver a safe working environment and compliance with national and international standards - Apply simple risk assessments and hazard design methods to your own projects - Identify hazards that occur with machinery and know how to deal with them
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 17
Get Book Here
Book Description
This document specifies the general technical specifications that shall be followed by down-the-hole drilling rigs and drilling machinery products. The content includes the terms and definitions, model naming requirements, safety requirements, general technical requirements, test methods, inspection rules, and the requirements for marking, packaging, transportation and storage of this type of machinery products. This Standard is applicable to down-the-hole drilling rigs and drilling machinery products produced within Hebei Province.
Author: Jayantha P. Liyanage
Publisher: Springer Nature
ISBN: 3030480216
Category : Technology & Engineering
Languages : en
Pages : 952
Get Book Here
Book Description
This proceedings of the 13th World Congress on Engineering Asset Management covers a range of topics that are timely, relevant and practically important in the modern digital era towards safer, cost effective, efficient, and secure engineered assets such as production and manufacturing plants, process facilities, civil structures, equipment, machinery, and infrastructure. It has compiled some pioneering work by domain experts of the global Engineering Asset Management community representing both public and private sectors. The professional coverage of the book includes: Asset management in Industry 4.0; Standards and models; Sustainable assets and processes; Life cycle perspectives; Smart and safer assets; Applied data science; Workplace safety; Asset health; Advances in equipment condition monitoring; Critical asset processes; and Innovation strategy and entrepreneurship The breadth and depth of these state-of-the-art, comprehensive proceedings make them an excellent resource for asset management practitioners, researchers and academics, as well as undergraduate and postgraduate students.
Author: Marvin Rausand
Publisher: John Wiley & Sons
ISBN: 1118553381
Category : Technology & Engineering
Languages : en
Pages : 356
Get Book Here
Book Description
Presents the theory and methodology for reliability assessments of safety-critical functions through examples from a wide range of applications Reliability of Safety-Critical Systems: Theory and Applications provides a comprehensive introduction to reliability assessments of safety-related systems based on electrical, electronic, and programmable electronic (E/E/PE) technology. With a focus on the design and development phases of safety-critical systems, the book presents theory and methods required to document compliance with IEC 61508 and the associated sector-specific standards. Combining theory and practical applications, Reliability of Safety-Critical Systems: Theory and Applications implements key safety-related strategies and methods to meet quantitative safety integrity requirements. In addition, the book details a variety of reliability analysis methods that are needed during all stages of a safety-critical system, beginning with specification and design and advancing to operations, maintenance, and modification control. The key categories of safety life-cycle phases are featured, including strategies for the allocation of reliability performance requirements; assessment methods in relation to design; and reliability quantification in relation to operation and maintenance. Issues and benefits that arise from complex modern technology developments are featured, as well as: Real-world examples from large industry facilities with major accident potential and products owned by the general public such as cars and tools Plentiful worked examples throughout that provide readers with a deeper understanding of the core concepts and aid in the analysis and solution of common issues when assessing all facets of safety-critical systems Approaches that work on a wide scope of applications and can be applied to the analysis of any safety-critical system A brief appendix of probability theory for reference With an emphasis on how safety-critical functions are introduced into systems and facilities to prevent or mitigate the impact of an accident, this book is an excellent guide for professionals, consultants, and operators of safety-critical systems who carry out practical, risk, and reliability assessments of safety-critical systems. Reliability of Safety-Critical Systems: Theory and Applications is also a useful textbook for courses in reliability assessment of safety-critical systems and reliability engineering at the graduate-level, as well as for consulting companies offering short courses in reliability assessment of safety-critical systems.
