Author: William Alexander Deer
Publisher: Geological Society of London
ISBN: 9781897799888
Category : Science
Languages : en
Pages : 940
Book Description
A second edition, in two parts, of Volume 1 of this well-known reference series. This volume deals mainly with the olivine and garnet groups and also the humite group, zircon, sphene, vesuvianite, the Al2SiO5 (including mullite), topaz, staurolite and chloritoid. The disilicates and ring-silicates are covered in Volume 1B. In the years since the first edition was published, the quantity and scope of research on the olivines, garnets and the aluminosilicates has grown enormously and has given rise to a wide variety of literature. This book, which has been completely rewritten and considerably expanded, summarizes the important research results and presents them in an organized fashion. Each mineral chapter is divided into sections on structure, chemistry, optical and physical properties, distinguishing features and paragenesis. Each chapter is headed by a tabulation of mineral data and a sketch showing optical orientation, and concludes with full references to the literature. Diagrams of the crystal structures are presented and are followed by a discussion of the structural features. The chemical sections include a large number of analyses from which structural formulae have been calculated, illustrating the chemical and paragenetical variation exhibited by each mineral; phase equilibria in relevant systems are fully considered. In the sections on optical and physical properties, particular attention is paid to the correlation of these properties with chemical composition. The principal modes of occurrence are described and discussed in the paragenesis sections; here again correlation with chemistry is emphasized. 11 volumes are available in this series.
Rock-Forming Minerals: Orthosilicates, Volume 1A
Rock Forming Minerals
Author: William Alexander Deer
Publisher: Geological Society of London
ISBN: 9781862392595
Category : Mineralogy
Languages : en
Pages : 336
Book Description
This extensive revision deals with the minerals talc, pyrophyllite, chlorite, serpentine, stilpnomelane, zussmanite, prehnite and apophyllite. The text has been completely rewritten and very much expanded to take account of the many advances that have been made in all aspects of the Earth sciences, not least mineralogy. Each chapter is headed by a brief tabulation of mineral data and ends with full references. Crystal structures are described and illustrated, followed by discussion of structural information gained from spectroscopic as well as X-ray and electron-optic methods. Chemical sections include many analyses and structural formulae, phase relations, igneous, metamorphic and sedimentary geochemistry, alteration and weathering. Examples are given of a range of mineral parageneses. Correlation between the various aspects of mineralogy are emphasized in order to provide a scientific understanding of minerals as well as their description and identification. So great has been the expansion of research on layered silicates that a separate volume (3A, 2003) was devoted entirely to micas and another (3C), entirely for clay minerals will also be published. Rock-Forming Minerals is an essential reference work for professionals, researchers and postgraduate students in Earth science and related fields in chemistry, physics, engineering, environmental and soil sciences.
Publisher: Geological Society of London
ISBN: 9781862392595
Category : Mineralogy
Languages : en
Pages : 336
Book Description
This extensive revision deals with the minerals talc, pyrophyllite, chlorite, serpentine, stilpnomelane, zussmanite, prehnite and apophyllite. The text has been completely rewritten and very much expanded to take account of the many advances that have been made in all aspects of the Earth sciences, not least mineralogy. Each chapter is headed by a brief tabulation of mineral data and ends with full references. Crystal structures are described and illustrated, followed by discussion of structural information gained from spectroscopic as well as X-ray and electron-optic methods. Chemical sections include many analyses and structural formulae, phase relations, igneous, metamorphic and sedimentary geochemistry, alteration and weathering. Examples are given of a range of mineral parageneses. Correlation between the various aspects of mineralogy are emphasized in order to provide a scientific understanding of minerals as well as their description and identification. So great has been the expansion of research on layered silicates that a separate volume (3A, 2003) was devoted entirely to micas and another (3C), entirely for clay minerals will also be published. Rock-Forming Minerals is an essential reference work for professionals, researchers and postgraduate students in Earth science and related fields in chemistry, physics, engineering, environmental and soil sciences.
Orthosilicates
Author: Roger G. Burns
Publisher: Walter de Gruyter GmbH & Co KG
ISBN: 1501508628
Category : Science
Languages : en
Pages : 464
Book Description
Volume 5 of Reviews in Mineralogy emphasizes the crystal chemistry and related physical properties of the major rock-forming orthosilicates. Though in some chapters more attention is given to phase equilibria and paragenesis than in others, these are for the most part cursorily treated with references to the more important papers and to review articles (also see Deer, Howie and Zussman, 1962, Rock-forming Minerals, Vol. 1, Ortho- and Ring Silicates).
Publisher: Walter de Gruyter GmbH & Co KG
ISBN: 1501508628
Category : Science
Languages : en
Pages : 464
Book Description
Volume 5 of Reviews in Mineralogy emphasizes the crystal chemistry and related physical properties of the major rock-forming orthosilicates. Though in some chapters more attention is given to phase equilibria and paragenesis than in others, these are for the most part cursorily treated with references to the more important papers and to review articles (also see Deer, Howie and Zussman, 1962, Rock-forming Minerals, Vol. 1, Ortho- and Ring Silicates).
Author:
Publisher: Cambridge University Press
ISBN: 1316584127
Category :
Languages : en
Pages : 258
Book Description
Publisher: Cambridge University Press
ISBN: 1316584127
Category :
Languages : en
Pages : 258
Book Description
Manual of Mineral Science
Author: Cornelis Klein
Publisher: John Wiley & Sons
ISBN: 0471721573
Category : Science
Languages : en
Pages : 726
Book Description
First published in 1848, authored by J.D. Dana, the Manual of Mineral Science now enters its 23rd edition. This new edition continues in the footsteps or its predecessors as the standard textbook in Mineralogy/Mineral Science/Earth Materials/Rocks and Minerals courses. This new edition contains 22 chapters, instead of 14 as in the prior edition. This is the result of having packaged coherent subject matter into smaller, more easily accessible units. Each chapter has a new and expanded introductory statement, which gives the user a quick overview of what is to come. Just before these introductions, each chapter features a new illustration that highlights some aspect of the subject in that particular chapter. All such changes make the text more readable, user-friendly and searchable. Many of the first 14 chapters are reasonably independent of each other, allowing for great flexibility in an instructor's preferred subject sequence. The majority of illustrations in this edition were re-rendered and/or redesigned and many new photographs, mainly of mineral specimens, were added. NEW Thoroughly Revised Lab Manual ISBN13: 978-0-471-77277-4 Also published by John Wiley & Sons, the thoroughly updated Laboratory Manual: Minerals and Rocks: Exercises in Crystal and Mineral Chemistry, Crystallography, X-ray Powder Diffraction, Mineral and Rock Identification, and Ore Mineralogy, 3e, is for use in the mineralogy laboratory and covers the subject matter in the same sequence as the Manual of Mineral Science, 23e.
Publisher: John Wiley & Sons
ISBN: 0471721573
Category : Science
Languages : en
Pages : 726
Book Description
First published in 1848, authored by J.D. Dana, the Manual of Mineral Science now enters its 23rd edition. This new edition continues in the footsteps or its predecessors as the standard textbook in Mineralogy/Mineral Science/Earth Materials/Rocks and Minerals courses. This new edition contains 22 chapters, instead of 14 as in the prior edition. This is the result of having packaged coherent subject matter into smaller, more easily accessible units. Each chapter has a new and expanded introductory statement, which gives the user a quick overview of what is to come. Just before these introductions, each chapter features a new illustration that highlights some aspect of the subject in that particular chapter. All such changes make the text more readable, user-friendly and searchable. Many of the first 14 chapters are reasonably independent of each other, allowing for great flexibility in an instructor's preferred subject sequence. The majority of illustrations in this edition were re-rendered and/or redesigned and many new photographs, mainly of mineral specimens, were added. NEW Thoroughly Revised Lab Manual ISBN13: 978-0-471-77277-4 Also published by John Wiley & Sons, the thoroughly updated Laboratory Manual: Minerals and Rocks: Exercises in Crystal and Mineral Chemistry, Crystallography, X-ray Powder Diffraction, Mineral and Rock Identification, and Ore Mineralogy, 3e, is for use in the mineralogy laboratory and covers the subject matter in the same sequence as the Manual of Mineral Science, 23e.
New Zealand Journal of Geology and Geophysics
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 292
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 292
Book Description
International Compendium of Numerical Data Projects
Author: CODATA (The Committee on Data for Science and Technology ofthe International Council of Scientific Unions)
Publisher: Springer Science & Business Media
ISBN: 3642871186
Category : Computers
Languages : en
Pages : 316
Book Description
At the time of its establishment in 1966, by the International Council of Scientific Unions (ICSU), the Committee on Data for Science and Technol ogy (CODATA) was given the basic mission of promoting and encouraging, on a worldwide basis, the production and distribution of compendia and of collections of critically selected numerical data on substances other forms of interest and importance to science and technology. To accomplish this aim, the following tasks were assigned to CODATA: (1) To ascertain, on a worldwide basis, what work on compilation of numerical data is being carried on in each country and under each union, and from this information, to prepare and distribute a Directory or Com pendium of the Data-Compiling Projects and Related Publications of the World; (2) To achieve coordination of existing programs and to recommend new programs; (3) To encourage, from all appropriate sources, financial support for work on compilation; (4) To encourage the use of internationally approved symbols, units, constants, terminology, and nomenclature; (5) To encourage and coordinate research on new methods for preparing and disseminating data for science and technology. In its first two years of operation, 1966 to 1968, in Washington, D. c. , U. S. A. , CODATA fortunately had as its Director Dr. GUY WADDINGTON, who was also Director of the Office of Critical Tables of the National Research Council (NRC), U. S. A. Dr.
Publisher: Springer Science & Business Media
ISBN: 3642871186
Category : Computers
Languages : en
Pages : 316
Book Description
At the time of its establishment in 1966, by the International Council of Scientific Unions (ICSU), the Committee on Data for Science and Technol ogy (CODATA) was given the basic mission of promoting and encouraging, on a worldwide basis, the production and distribution of compendia and of collections of critically selected numerical data on substances other forms of interest and importance to science and technology. To accomplish this aim, the following tasks were assigned to CODATA: (1) To ascertain, on a worldwide basis, what work on compilation of numerical data is being carried on in each country and under each union, and from this information, to prepare and distribute a Directory or Com pendium of the Data-Compiling Projects and Related Publications of the World; (2) To achieve coordination of existing programs and to recommend new programs; (3) To encourage, from all appropriate sources, financial support for work on compilation; (4) To encourage the use of internationally approved symbols, units, constants, terminology, and nomenclature; (5) To encourage and coordinate research on new methods for preparing and disseminating data for science and technology. In its first two years of operation, 1966 to 1968, in Washington, D. c. , U. S. A. , CODATA fortunately had as its Director Dr. GUY WADDINGTON, who was also Director of the Office of Critical Tables of the National Research Council (NRC), U. S. A. Dr.
Materials Handbook
Author: François Cardarelli
Publisher: Springer Science & Business Media
ISBN: 1846286697
Category : Technology & Engineering
Languages : en
Pages : 1365
Book Description
This unique and practical book provides quick and easy access to data on the physical and chemical properties of all classes of materials. The second edition has been much expanded to include whole new families of materials while many of the existing families are broadened and refined with new material and up-to-date information. Particular emphasis is placed on the properties of common industrial materials in each class. Detailed appendices provide additional information, and careful indexing and a tabular format make the data quickly accessible. This book is an essential tool for any practitioner or academic working in materials or in engineering.
Publisher: Springer Science & Business Media
ISBN: 1846286697
Category : Technology & Engineering
Languages : en
Pages : 1365
Book Description
This unique and practical book provides quick and easy access to data on the physical and chemical properties of all classes of materials. The second edition has been much expanded to include whole new families of materials while many of the existing families are broadened and refined with new material and up-to-date information. Particular emphasis is placed on the properties of common industrial materials in each class. Detailed appendices provide additional information, and careful indexing and a tabular format make the data quickly accessible. This book is an essential tool for any practitioner or academic working in materials or in engineering.
Accuracy in Trace Analysis
Author:
Publisher:
ISBN:
Category : Trace elements
Languages : en
Pages : 672
Book Description
Publisher:
ISBN:
Category : Trace elements
Languages : en
Pages : 672
Book Description
NBS Special Publication
Author:
Publisher:
ISBN:
Category : Weights and measures
Languages : en
Pages : 674
Book Description
Publisher:
ISBN:
Category : Weights and measures
Languages : en
Pages : 674
Book Description