Author: Smita Gangaprasad Rao
Publisher: Linköping University Electronic Press
ISBN: 9179296688
Category :
Languages : en
Pages : 28
Book Description
The need for materials that enhance life span, performance, and sustainability has propelled research in alloy design from binary alloys to more complex systems such as multicomponent alloys. The CoCrFeMnNi alloy, more commonly known as the Cantor alloy, is one of the most studied systems in bulk as well as thin film. The addition of light elements such as boron, carbon, nitrogen, and oxygen is a means to alter the properties of these materials. The challenge lies in understanding the process of phase formation and microstructure evolution on addition of these light elements. To address this challenge, I investigate multicomponent alloys based on a simplified version of the Cantor alloy. My thesis investigates the addition of nitrogen into a Cantor variant system as a step towards understanding the full Cantor alloy. Me1-yNy (Me = Cr + Fe + Co, 0.14 ≤ y ≤0.28 thin films were grown by reactive magnetron sputtering. The films showed a change in structure from fcc to mixed fcc+bcc and finally a bcc-dominant film with increasing nitrogen content. The change in phase and microstructure influenced the mechanical and electrical properties of the films. A maximum hardness of 11 ± 0.7 GPa and lowest electrical resistivity of 28 ± 5 μΩcm were recorded in the film with mixed phase (fcc+bcc) crystal structure. Copper was added as a fourth metallic alloying element into the film with the mixed fcc + bcc structure, resulting in stabilization of the bcc phase even though Cu has been reported to be a fcc stabilizer. The energy brought to the substrate increases on Cu addition which promotes surface diffusion of the ions and leads to small but randomly oriented grains. The maximum hardness recorded by nanoindentation was found to be 13.7 ± 0.2 GPa for the sample Cu0.05. While it is generally believed that large amounts of Cu can be detrimental to thin film properties due to segregation, this study shows that small amounts of Cu in the multicomponent matrix could be beneficial in stabilizing phases as well as for mechanical properties. This thesis thus provides insights into the phase formation of nitrogen-containing multicomponent alloys.
Phase formation in multicomponent films based on 3d transition metals
Author: Smita Gangaprasad Rao
Publisher: Linköping University Electronic Press
ISBN: 9179296688
Category :
Languages : en
Pages : 28
Book Description
The need for materials that enhance life span, performance, and sustainability has propelled research in alloy design from binary alloys to more complex systems such as multicomponent alloys. The CoCrFeMnNi alloy, more commonly known as the Cantor alloy, is one of the most studied systems in bulk as well as thin film. The addition of light elements such as boron, carbon, nitrogen, and oxygen is a means to alter the properties of these materials. The challenge lies in understanding the process of phase formation and microstructure evolution on addition of these light elements. To address this challenge, I investigate multicomponent alloys based on a simplified version of the Cantor alloy. My thesis investigates the addition of nitrogen into a Cantor variant system as a step towards understanding the full Cantor alloy. Me1-yNy (Me = Cr + Fe + Co, 0.14 ≤ y ≤0.28 thin films were grown by reactive magnetron sputtering. The films showed a change in structure from fcc to mixed fcc+bcc and finally a bcc-dominant film with increasing nitrogen content. The change in phase and microstructure influenced the mechanical and electrical properties of the films. A maximum hardness of 11 ± 0.7 GPa and lowest electrical resistivity of 28 ± 5 μΩcm were recorded in the film with mixed phase (fcc+bcc) crystal structure. Copper was added as a fourth metallic alloying element into the film with the mixed fcc + bcc structure, resulting in stabilization of the bcc phase even though Cu has been reported to be a fcc stabilizer. The energy brought to the substrate increases on Cu addition which promotes surface diffusion of the ions and leads to small but randomly oriented grains. The maximum hardness recorded by nanoindentation was found to be 13.7 ± 0.2 GPa for the sample Cu0.05. While it is generally believed that large amounts of Cu can be detrimental to thin film properties due to segregation, this study shows that small amounts of Cu in the multicomponent matrix could be beneficial in stabilizing phases as well as for mechanical properties. This thesis thus provides insights into the phase formation of nitrogen-containing multicomponent alloys.
Publisher: Linköping University Electronic Press
ISBN: 9179296688
Category :
Languages : en
Pages : 28
Book Description
The need for materials that enhance life span, performance, and sustainability has propelled research in alloy design from binary alloys to more complex systems such as multicomponent alloys. The CoCrFeMnNi alloy, more commonly known as the Cantor alloy, is one of the most studied systems in bulk as well as thin film. The addition of light elements such as boron, carbon, nitrogen, and oxygen is a means to alter the properties of these materials. The challenge lies in understanding the process of phase formation and microstructure evolution on addition of these light elements. To address this challenge, I investigate multicomponent alloys based on a simplified version of the Cantor alloy. My thesis investigates the addition of nitrogen into a Cantor variant system as a step towards understanding the full Cantor alloy. Me1-yNy (Me = Cr + Fe + Co, 0.14 ≤ y ≤0.28 thin films were grown by reactive magnetron sputtering. The films showed a change in structure from fcc to mixed fcc+bcc and finally a bcc-dominant film with increasing nitrogen content. The change in phase and microstructure influenced the mechanical and electrical properties of the films. A maximum hardness of 11 ± 0.7 GPa and lowest electrical resistivity of 28 ± 5 μΩcm were recorded in the film with mixed phase (fcc+bcc) crystal structure. Copper was added as a fourth metallic alloying element into the film with the mixed fcc + bcc structure, resulting in stabilization of the bcc phase even though Cu has been reported to be a fcc stabilizer. The energy brought to the substrate increases on Cu addition which promotes surface diffusion of the ions and leads to small but randomly oriented grains. The maximum hardness recorded by nanoindentation was found to be 13.7 ± 0.2 GPa for the sample Cu0.05. While it is generally believed that large amounts of Cu can be detrimental to thin film properties due to segregation, this study shows that small amounts of Cu in the multicomponent matrix could be beneficial in stabilizing phases as well as for mechanical properties. This thesis thus provides insights into the phase formation of nitrogen-containing multicomponent alloys.
Phase Formation in Multicomponent Films Based on 3d Transition Metals
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Phase Formation of Nanolaminated Transition Metal Carbide Thin Films
Author: Chung-Chuan Lai
Publisher:
ISBN: 9789176855263
Category :
Languages : en
Pages : 82
Book Description
Publisher:
ISBN: 9789176855263
Category :
Languages : en
Pages : 82
Book Description
Metals Abstracts Index
Author:
Publisher:
ISBN:
Category : Metallurgy
Languages : en
Pages : 1622
Book Description
Publisher:
ISBN:
Category : Metallurgy
Languages : en
Pages : 1622
Book Description
Reactive Sputter Deposition
Author: Diederik Depla
Publisher: Springer Science & Business Media
ISBN: 3540766642
Category : Technology & Engineering
Languages : en
Pages : 584
Book Description
In this valuable work, all aspects of the reactive magnetron sputtering process, from the discharge up to the resulting thin film growth, are described in detail, allowing the reader to understand the complete process. Hence, this book gives necessary information for those who want to start with reactive magnetron sputtering, understand and investigate the technique, control their sputtering process and tune their existing process, obtaining the desired thin films.
Publisher: Springer Science & Business Media
ISBN: 3540766642
Category : Technology & Engineering
Languages : en
Pages : 584
Book Description
In this valuable work, all aspects of the reactive magnetron sputtering process, from the discharge up to the resulting thin film growth, are described in detail, allowing the reader to understand the complete process. Hence, this book gives necessary information for those who want to start with reactive magnetron sputtering, understand and investigate the technique, control their sputtering process and tune their existing process, obtaining the desired thin films.
Handbook of Deposition Technologies for Films and Coatings
Author: Peter M. Martin
Publisher: William Andrew
ISBN: 0815520328
Category : Technology & Engineering
Languages : en
Pages : 932
Book Description
This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Publisher: William Andrew
ISBN: 0815520328
Category : Technology & Engineering
Languages : en
Pages : 932
Book Description
This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Ceramic Abstracts
Author:
Publisher:
ISBN:
Category : Ceramics
Languages : en
Pages : 252
Book Description
Publisher:
ISBN:
Category : Ceramics
Languages : en
Pages : 252
Book Description
Multicomponent and Multilayered Thin Films for Advanced Microtechnologies: Techniques, Fundamentals and Devices
Author: O. Auciello
Publisher: Springer Science & Business Media
ISBN: 9401117276
Category : Technology & Engineering
Languages : en
Pages : 625
Book Description
The synthesis of multicomponent/multilayered superconducting, conducting, semiconducting and insulating thin films has become the subject of an intensive, worldwide, interdisciplinary research effort. The development of deposition-characterization techniques and the science and technology related to the synthesis of these films are critical for the successful evolution of this interdisciplinary field of research and the implementation of the new materials in a whole new generation of advanced microdevices. This book contains the lectures and contributed papers on various scientific and technological aspects of multicomponent and multilayered thin films presented at a NATO/ASI. Compared to other recent books on thin films, the distinctive character of this book is the interdisciplinary treatment of the various fields of research related to the different thin film materials mentioned above. The wide range of topics discussed in this book include vacuum-deposition techniques, synthesis-processing, characterization, and devices of multicomponent/multilayered oxide high temperature superconducting, ferroelectric, electro-optic, optical, metallic, silicide, and compound semiconductor thin films. The book presents an unusual intedisciplinary exchange of ideas between researchers with cross-disciplinary backgrounds and it will be useful to established investigators as well as postdoctoral and graduate students.
Publisher: Springer Science & Business Media
ISBN: 9401117276
Category : Technology & Engineering
Languages : en
Pages : 625
Book Description
The synthesis of multicomponent/multilayered superconducting, conducting, semiconducting and insulating thin films has become the subject of an intensive, worldwide, interdisciplinary research effort. The development of deposition-characterization techniques and the science and technology related to the synthesis of these films are critical for the successful evolution of this interdisciplinary field of research and the implementation of the new materials in a whole new generation of advanced microdevices. This book contains the lectures and contributed papers on various scientific and technological aspects of multicomponent and multilayered thin films presented at a NATO/ASI. Compared to other recent books on thin films, the distinctive character of this book is the interdisciplinary treatment of the various fields of research related to the different thin film materials mentioned above. The wide range of topics discussed in this book include vacuum-deposition techniques, synthesis-processing, characterization, and devices of multicomponent/multilayered oxide high temperature superconducting, ferroelectric, electro-optic, optical, metallic, silicide, and compound semiconductor thin films. The book presents an unusual intedisciplinary exchange of ideas between researchers with cross-disciplinary backgrounds and it will be useful to established investigators as well as postdoctoral and graduate students.
Nuclear Science Abstracts
Author:
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 934
Book Description
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 934
Book Description
Chemical Abstracts
Author:
Publisher:
ISBN:
Category : Chemistry
Languages : en
Pages : 2726
Book Description
Publisher:
ISBN:
Category : Chemistry
Languages : en
Pages : 2726
Book Description