Author: Brian Scott SmithPublisher:
ISBN:
Category : Melt spinning
Languages : en
Pages : 384
Book Description
Performance Optimization of a Chill Block Melt Spinning Machine and Fabrication and Analysis of Melt-spun V2CrB1-xA1x Alloys
Author: Brian Scott SmithPublisher:
ISBN:
Category : Melt spinning
Languages : en
Pages : 384
Book Description
A Review: Chill-Block Melt Spin Technique, Theories & Applications
Author: Mustafa KamalPublisher: Bentham Science Publishers
ISBN: 160805151X
Category : Technology & Engineering
Languages : en
Pages : 192
Book Description
Rapid Solidification Processing of molten metals and alloys has proved to be a reliable route for producing new and advanced materials. The Chill-Block Melt Spin (CBMS) technique is important because its simplicity, flexibility and perfection. High quality materials can be produced with lower costs, as compared to other routes, by refining the microstructure and trapping the nucleated (new) metastable phases. Melt-spun ribbons subsequently produced can then be consolidated to produce billets and sheets that can be used in many industries especially high-tech industries such as aerospace and racing automobiles. This book contains several perspectives about CBMS technology and should be a useful review for undergraduate and post-graduate metallurgy students.
A Review: Chill-Block Melt Spin Technique: Theories & Applications
Author: Usama S. MohammadPublisher:
ISBN: 9781608055500
Category : Technology & Engineering
Languages : en
Pages : 194
Book Description
Rapid Solidification Processing of molten metals and alloys has proved to be a reliable route for producing new and advanced materials. The Chill-Block Melt Spin (CBMS) technique is important because its simplicity, flexibility and perfection. High quality materials can be produced with lower costs, as compared to other routes, by refining the microstructure and trapping the nucleated (new) metastable phases. Melt-spun ribbons subsequently produced can then be consolidated to produce billets and sheets that can be used in many industries especially high-tech industries such as aerospace and racing automobiles. This book contains several perspectives about CBMS technology and should be a useful review for undergraduate and post-graduate metallurgy students.
Melt Dynamics of Single-roller Chill Block Melt Spinning
Author: Branden Bernard KappesPublisher:
ISBN:
Category : Melt spinning
Languages : en
Pages : 54
Book Description
Melt Spinning of Crystalline Alloys
Author: S. J. B. CharterPublisher:
ISBN:
Category : Engineering
Languages : en
Pages : 13
Book Description
This paper describes the effect of melt-spinning process parameters such as orifice diameter, ejection pressure, and wheel speed, in determining the ribbon dimensions of Pb-Sn eutectic and low content A1 alloys. Rapid solidification techniques have been studied ever since the early experiments of Duwez et al. In recent years, the melt-spinning process (sometimes known as chill block casting) has been of particular interest because of the possibility of manufacturing iron-based amorphous alloys for magnetic applications. Liebermann and Graham and Kavesh have discussed the effect of melt spinning process parameters on the dimensions of melt-spun ribbons of amorphous Fe(40)Ni(40)B(20). This note describes the results of an investigation into the effect of melt spinning process parameters on the ribbon dimensions of two other materials, namely Pb-Sn eutectic and AL containing small quantities of Fe and Mn. The main objective was to determine whether the conclusions of Liebermann and Graham and Kavesh can be applied over a wide range of materials. Thus, Pb-Sn and AL-(Fe, Mn) were chosen because they have very different melting points from Fe(40)Ni(40)B(20), and because they solidify in a crystalline rather than amorphous form.
