Multiphase Flow Modeling and Analysis of Phased Filling Process for Pulsed Detonation Engine PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Multiphase Flow Modeling and Analysis of Phased Filling Process for Pulsed Detonation Engine PDF full book. Access full book title Multiphase Flow Modeling and Analysis of Phased Filling Process for Pulsed Detonation Engine by Nirmal Kumar Umapathy. Download full books in PDF and EPUB format.
Author: Nirmal Kumar Umapathy
Publisher:
ISBN:
Category :
Languages : en
Pages : 92
Get Book Here
Book Description
Filling of reactants into a pulsed detonation engine (PDE) should be carried out quickly because any lengthening of the fill time will lead to an increased cycle time. The fill process and, the purge process constitutes a large proportion of time in a cycle. The purpose of this research was to improve the time of fill by implementing various injection geometries in two injection schemes with five different premixed stoichiometric fuel-air mixture injected at wide range of velocity. The different configurations examined were end wall injection, side wall injection with ports angled and normal to the flow direction and staggered side wall injection. The two injection schemes were simultaneous injection and phased injection through side wall ports. The fuel choices were biogas, hydrogen, methane, propane and octane, all in the gaseous state. The oxidizer considered was air and pre-mixed with fuels. Numerical modeling was carried out using the commercial software Fluent as the mesh generation tool and flow solver, solving the Reynolds-averaged Navier-Stokes equations with a k-[epsilon] turbulence model. The normal sidewall injection yielded the shortest fill time while staggered injection resulted in good fill uniformity. Angled upstream injection resulted in the most advantage with low time of fill, good fill uniformity and moderate spillage. Future improvements were suggested.
Author: Nirmal Kumar Umapathy
Publisher:
ISBN:
Category :
Languages : en
Pages : 92
Get Book Here
Book Description
Filling of reactants into a pulsed detonation engine (PDE) should be carried out quickly because any lengthening of the fill time will lead to an increased cycle time. The fill process and, the purge process constitutes a large proportion of time in a cycle. The purpose of this research was to improve the time of fill by implementing various injection geometries in two injection schemes with five different premixed stoichiometric fuel-air mixture injected at wide range of velocity. The different configurations examined were end wall injection, side wall injection with ports angled and normal to the flow direction and staggered side wall injection. The two injection schemes were simultaneous injection and phased injection through side wall ports. The fuel choices were biogas, hydrogen, methane, propane and octane, all in the gaseous state. The oxidizer considered was air and pre-mixed with fuels. Numerical modeling was carried out using the commercial software Fluent as the mesh generation tool and flow solver, solving the Reynolds-averaged Navier-Stokes equations with a k-[epsilon] turbulence model. The normal sidewall injection yielded the shortest fill time while staggered injection resulted in good fill uniformity. Angled upstream injection resulted in the most advantage with low time of fill, good fill uniformity and moderate spillage. Future improvements were suggested.
Author: Guan Heng Yeoh
Publisher: Butterworth-Heinemann
ISBN: 0080982336
Category : Science
Languages : en
Pages : 385
Get Book Here
Book Description
Written by leading multiphase flow and CFD experts, this book enables engineers and researchers to understand the use of PBM and CFD frameworks. Population balance approaches can now be used in conjunction with CFD, effectively driving more efficient and effective multiphase flow processes. Engineers familiar with standard CFD software, including ANSYS-CFX and ANSYS–Fluent, will be able to use the tools and approaches presented in this book in the effective research, modeling and control of multiphase flow problems. Builds a complete understanding of the theory behind the application of population balance models and an appreciation of the scale-up of computational fluid dynamics (CFD) and population balance modeling (PBM) to a variety of engineering and industry applications in chemical, pharmaceutical, energy and petrochemical sectors The tools in this book provide the opportunity to incorporate more accurate models in the design of chemical and particulate based multiphase processes Enables readers to translate theory to practical use with CFD software
Author: George Yadigaroglu
Publisher: Springer
ISBN: 3319587188
Category : Technology & Engineering
Languages : en
Pages : 221
Get Book Here
Book Description
This book is the maiden volume in a new series devoted to lectures delivered through the annual seminars “Short Courses on Multiphase Flow,” held primarily at ETH Zurich continuously since 1984. The Zurich short courses, presented by prominent specialists in the various topics covered, have attracted a very large number of participants. This series presents fully updated and when necessary re-grouped lectures in a number of topical volumes. The collection aims at giving a condensed, critical and up-to-date view of basic knowledge on multiphase flows in relation to systems and phenomena encountered in industrial applications. The present volume covers the background of Multiphase Flows (MPF) that introduces the reader to the particular nature and complexity of multiphase flows and to basic but critical aspects of MPFs including concepts and the definition of the quantities of interest, an introduction to modelling strategies for MPFs, flow regimes, flow regime maps and tr ansition criteria. It also deals with the ubiquitous needs of the multiphase-flow modeller, namely pressure drop and phase distribution, i.e., the void fraction and the topology of the phases that determines the flow regimes.
Author: Juan J. Manzano-Ruiz
Publisher: John Wiley & Sons
ISBN: 1119888530
Category : Technology & Engineering
Languages : en
Pages : 356
Get Book Here
Book Description
Multiphase Transport of Hydrocarbons in Pipes An introduction to multiphase flows in the oil and gas industry The term ‘multiphase flow’ refers to the concurrent flow of oil and/or gas, alongside other substances or materials such as production water, chemical inhibitors, and solids (e.g. sand). This is a critical topic in the oil and gas industry, where the presence of multiple flow phases in pipelines affects deliverability, generates serious complications in predicting flow performance for system design and operation, and requires specific risk mitigation actions and continuous maintenance. Chemical and Mechanical Engineers interested in working in this industry will benefit from understanding the basic theories and practices required to model and operate multiphase flows through pipelines, wells, and other components of the production system. Multiphase Transport of Hydrocarbons in Pipes meets this need with a comprehensive overview of five decades of research into multiphase flow. Incorporating fundamental theories, historic and cutting-edge multiphase flow models, and concrete examples of current and future applications. This book provides a sound technical background for prospective or working engineers in need of understanding this crucial area of industry. Readers will also find: Fundamental principles supporting commercial software Detailed tools for estimating multiphase flow rates through flowlines, wells, and more Integration of conservation principles with thermodynamic and transport properties Coverage of legacy and modern simulation models This book is ideal for flow assurance engineers, facilities engineers, oil and gas production engineers, and process engineers, as well as chemical and mechanical engineering students looking to work in any of these roles.
Author: Volfango Bertola
Publisher: Springer
ISBN: 3709125383
Category : Technology & Engineering
Languages : en
Pages : 433
Get Book Here
Book Description
This is an up-to-date review of recent advances in the study of two-phase flows, with focus on gas-liquid flows, liquid-liquid flows, and particle transport in turbulent flows. The book is divided into several chapters, which after introducing basic concepts lead the reader through a more complex treatment of the subjects. The reader will find an extensive review of both the older and the more recent literature, with abundance of formulas, correlations, graphs and tables. A comprehensive (though non exhaustive) list of bibliographic references is provided at the end of each chapter. The volume is especially indicated for researchers who would like to carry out experimental, theoretical or computational work on two-phase flows, as well as for professionals who wish to learn more about this topic.
Author: Guan Heng Yeoh
Publisher: Butterworth-Heinemann
ISBN: 0081024541
Category : Technology & Engineering
Languages : en
Pages : 640
Get Book Here
Book Description
Computational Techniques for Multiphase Flows, Second Edition, provides the latest research and theories covering the most popular multiphase flows The book begins with an overview of the state-of-the-art techniques for multiple numerical methods in handling multiphase flow, compares them, and finally highlights their strengths and weaknesses. In addition, it covers more straightforward, conventional theories and governing equations in early chapters, moving on to the more modern and complex computational models and tools later in the book. It is therefore accessible to those who may be new to the subject while also featuring topics of interest to the more experienced researcher. Mixed or multiphase flows of solid/liquid or solid/gas are commonly found in many industrial fields, and their behavior is complex and difficult to predict in many cases. The use of computational fluid dynamics (CFD) has emerged as a powerful tool for understanding fluid mechanics in multiphase reactors, which are widely used in the chemical, petroleum, mining, food, automotive, energy, aerospace and pharmaceutical industries. This revised edition is an ideal reference for scientists, MSc students and chemical and mechanical engineers in these areas. Includes updated chapters in addition to a brand-new section on granular flows. Features novel solution methods for multiphase flow, along with recent case studies. Explains how and when to use the featured technique and how to interpret the results and apply them to improving applications.
Author: Marcio Ferreira Martins
Publisher: Springer Nature
ISBN: 303093456X
Category : Technology & Engineering
Languages : en
Pages : 342
Get Book Here
Book Description
This book presents isothermal and non-isothermal multiphase flows with and without phase change or chemical reactions. Six main axes of multiphase flow are covered in a strategic order: Multiphase Flow in Industry, Multiphase Flow Measurement and Instrumentation, Multiphase Flow With Phase Change & Chemical Reactions, Multiphase Flow Modeling, Experimental Multiphase Flow, and Wet and Dry Particulate Systems. Each part is opened by mini-reviews written by internationally prominent researchers from the academy and industry. The content is of interest to researchers and engineers working in mining, oil and gas, power, nuclear, chemical process, space, food, biomedical, micro and nanotechnology, and other industries.
Author: Nikolay Ivanov Kolev
Publisher: Springer Science & Business Media
ISBN: 3642206050
Category : Technology & Engineering
Languages : en
Pages : 810
Get Book Here
Book Description
Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. In its fourth extended edition the successful monograph package “Multiphase Flow Daynmics” contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present first volume the local volume and time averaging is used to derive a complete set of conservation equations for three fluids each of them having multi components as constituents. Large parts of the book are devoted on the design of successful numerical methods for solving the obtained system of partial differential equations. Finally the analysis is repeated for boundary fitted curvilinear coordinate systems designing methods applicable for interconnected multi-blocks. This fourth edition includes various updates, extensions, improvements and corrections. "The literature in the field of multiphase flows is numerous. Therefore, it is very important to have a comprehensive and systematic overview including useful numerical methods. The volumes have the character of a handbook and accomplish this function excellently. The models are described in detail and a great number of comprehensive examples and some cases useful for testing numerical solutions are included. These two volumes are very useful for scientists and practicing engineers in the fields of technical thermodynamics, chemical engineering, fluid mechanics, and for mathematicians with interest in technical problems. Besides, they can give a good overview of the dynamically developing, complex field of knowledge to students. This monograph is highly recommended.” BERND PLATZER, ZAAM In the present first volume the local volume and time averaging is used to derive a complete set of conservation equations for three fluids each of them having multi components as constituents. Large parts of the book are devoted on the design of successful numerical methods for solving the obtained system of partial differential equations. Finally the analysis is repeated for boundary fitted curvilinear coordinate systems designing methods applicable for interconnected multi-blocks. This fourth edition includes various updates, extensions, improvements and corrections. "The literature in the field of multiphase flows is numerous. Therefore, it is very important to have a comprehensive and systematic overview including useful numerical methods. The volumes have the character of a handbook and accomplish this function excellently. The models are described in detail and a great number of comprehensive examples and some cases useful for testing numerical solutions are included. These two volumes are very useful for scientists and practicing engineers in the fields of technical thermodynamics, chemical engineering, fluid mechanics, and for mathematicians with interest in technical problems. Besides, they can give a good overview of the dynamically developing, complex field of knowledge to students. This monograph is highly recommended.” BERND PLATZER, ZAAM
Author: Nikolay Ivanov Kolev
Publisher: Springer Science & Business Media
ISBN: 9783540221074
Category : Multiphase flow
Languages : en
Pages : 730
Get Book Here
Book Description
Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. In its third extended edition this book contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations. This book provides a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present second volume the mechanical and thermal interactions in multiphase dynamics are provided. This third edition includes various updates, extensions, improvements and corrections.
Author: Vivek V. Ranade
Publisher: John Wiley & Sons
ISBN: 3527812040
Category : Technology & Engineering
Languages : en
Pages : 838
Get Book Here
Book Description
Discover the cutting-edge in multiphase flows used in the process industries In Multiphase Flows for Process Industries: Fundamentals and Applications, a team of accomplished chemical engineers delivers an insightful and complete treatment of the state-of-the-art in commonly encountered multiphase flows in the process industries. After discussing the theoretical background, experimental methods, and computational methods applicable to multiphase flows, the authors explore specific examples from the process industries. The book covers a wide range of multiphase flows, including gas-solid fluidized beds and flows with phase change. It also provides direction on how to use current advances in the field to realize efficient and optimized processes. Filling the gap between theory and practice, this unique reference also includes: A thorough introduction to multiphase flows and the process industry Practical discussions of flow regimes, lower order models and correlations, and the chronological development of mathematical models for multiphase flows Comprehensive explorations of experimental methods for characterizing multiphase flows, including flow imaging and visualization In-depth examinations of computational models for simulating multiphase flows Perfect for chemical and process engineers, Multiphase Flows for Process Industries: Fundamentals and Applications is required reading for graduate and doctoral students in the engineering sciences, as well as professionals in the chemical industry.
