Mechanized Tunnelling in Urban Areas PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Mechanized Tunnelling in Urban Areas PDF full book. Access full book title Mechanized Tunnelling in Urban Areas by Vittorio Guglielmetti. Download full books in PDF and EPUB format.
Author: Vittorio Guglielmetti
Publisher: CRC Press
ISBN: 0203938518
Category : Technology & Engineering
Languages : en
Pages : 504
Get Book Here
Book Description
Internationally, the mechanized excavation of tunnels has intensified in the last two decades, as the number of tunnels being constructed for subways and railway underpasses increases. The subject of mechanized tunnelling in urban areas has not previously received the attention that it deserves, despite there being specific hazards associated with the construction of tunnels in metropolitan areas, including poor ground conditions, water tables higher than the level of tunnels, and subsidence leading to damage to the existing structures on the surface. The application of technologies for achieving the stability of the tunnel and for minimizing surface settlement is described in this book. Accurate characterization of the ground; rigorous assessment and management of risk from design to maintenance; the correct choice of a tunnel boring machine and a plan for the advancement of the tunnel; specific excavation procedures and real-time monitoring of excavation parameters are all discussed in this thorough work.
Author: Vittorio Guglielmetti
Publisher: CRC Press
ISBN: 0203938518
Category : Technology & Engineering
Languages : en
Pages : 504
Get Book Here
Book Description
Internationally, the mechanized excavation of tunnels has intensified in the last two decades, as the number of tunnels being constructed for subways and railway underpasses increases. The subject of mechanized tunnelling in urban areas has not previously received the attention that it deserves, despite there being specific hazards associated with the construction of tunnels in metropolitan areas, including poor ground conditions, water tables higher than the level of tunnels, and subsidence leading to damage to the existing structures on the surface. The application of technologies for achieving the stability of the tunnel and for minimizing surface settlement is described in this book. Accurate characterization of the ground; rigorous assessment and management of risk from design to maintenance; the correct choice of a tunnel boring machine and a plan for the advancement of the tunnel; specific excavation procedures and real-time monitoring of excavation parameters are all discussed in this thorough work.
Author: David Chapman
Publisher: CRC Press
ISBN: 1498766455
Category : Technology & Engineering
Languages : en
Pages : 557
Get Book Here
Book Description
Tunnelling provides a robust solution to a variety of engineering challenges. It is a complex process, which requires a firm understanding of the ground conditions as well as the importance of ground-structure interaction. This book covers the full range of areas related to tunnel construction required to embark upon a career in tunnelling. It also includes a number of case studies related to real tunnel projects, to demonstrate how the theory applies in practice. New features of this second edition include: the introduction of a case study related to Crossrail’s project in London, focussing on the Whitechapel and Liverpool Street station tunnels and including considerations of building tunnels in a congested urban area; and further information on recent developments in tunnel boring machines, including further examples of all the different types of machine as well as multi-mode machines. The coverage includes: Both hard-rock and soft-ground conditions Site investigation, parameter selection, and design considerations Methods of improving the stability of the ground and lining techniques Descriptions of the various main tunnelling techniques Health and safety considerations Monitoring of tunnels during construction Description of the latest tunnel boring machines Case studies with real examples, including Crossrail’s project in London Clear, concise, and heavily illustrated, this is a vital text for final-year undergraduate and MSc students and an invaluable starting point for young professionals and novices in tunnelling.
Author: Bernhard Maidl
Publisher: John Wiley & Sons
ISBN: 3433601496
Category : Technology & Engineering
Languages : en
Pages : 489
Get Book Here
Book Description
Mechanised shield tunnelling has developed considerably since the publication of the first edition of this book. Challenging tunnel projects under difficult conditions demand innovative solutions, which has led to constant further development and innovation in process technology, constructions operations and the machines and materials used. The book collects the latest state of technology in mechanised shield tunnelling. It describes the basics of mechanised tunnelling technology and the various types of machines and gives calculation methods and constructural advice. Further chapters cover excavation tools, muck handling, tunnel support, surveying and steering as well as workplace safety. There is also detailled information about contractual aspects and process controlling.
Author: Benoit Jones
Publisher: CRC Press
ISBN: 0429893574
Category : Technology & Engineering
Languages : en
Pages : 582
Get Book Here
Book Description
Soft Ground Tunnel Design is a textbook that teaches the principles of tunnel and underground space design in soft ground. ‘Soft ground’ refers to soil, in contrast to rock. The book focuses on stability, prediction of ground movements and structural design of the lining. It shows that the choice of excavation and support methods depends on ground stability; limitation of damage to the existing built environment; and health, safety and environmental considerations. Author Benoît Jones builds on the basic principles of soil-structure interaction, the three-dimensional effects of construction sequence and the effects of construction on other surface or subsurface structures in steps of gradually increasing complexity. The use of worked examples throughout, and example problems at the end of each chapter, gives the reader confidence to apply their knowledge. Engineers and graduate students will be able to: • Understand the complex soil-structure interaction around an advancing tunnel. • Calculate heading stability. • Understand the basis for choosing an underground construction method and/or ground improvement method. • Design tunnel linings in soft ground using a variety of methods. • Predict ground movements. • Predict the effects of construction on the built environment and assess potential damage. Benoît Jones has worked in tunnelling as a designer, contractor and academic for more than 20 years. He set up and ran the MSc Tunnelling and Underground Space course at the University of Warwick. He is now managing director of his own company, Inbye Engineering.
Author: Michael Beer
Publisher:
ISBN: 9780784415139
Category : Tunnels
Languages : en
Pages : 130
Get Book Here
Book Description
IRP 2 contains selected papers from the 2016 International Workshop on Resiliency of Urban Tunnels, which address tunnels as a part of the complex urban infrastructure system and provide a basis for the development of a dynamic risk control and resilient design approach to urban tunnels.
Author: Mohammed Elshafie
Publisher: CRC Press
ISBN: 1000421104
Category : Technology & Engineering
Languages : en
Pages : 1846
Get Book Here
Book Description
Geotechnical Aspects of Underground Construction in Soft Ground comprises a collection of 112 papers, four general reports on the symposium themes, the Fujita Lecture, three Special Lectures and the Bright Spark Lecture presented at the Tenth International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, held in Cambridge, United Kingdom, 27-29 June 2022. The symposium is the latest in a series which began in New Delhi in 1994, and was followed by symposia in London (1996), Tokyo (1999), Toulouse (2002), Amsterdam (2005), Shanghai (2008), Rome (2011), Seoul (2014) and Sao Paulo (2017). This was organised by the Geotechnical Research Group at the University of Cambridge, under the auspices of the Technical Committee TC204 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). Geotechnical Aspects of Underground Construction in Soft Ground includes contributions from more than 25 countries on research, design and construction of underground works in soft ground. The contributions cover: Field case studies Sensing technologies and monitoring for underground construction in soft ground Physical and numerical modelling of tunnels and deep excavations in soft ground Seismic response of underground infrastructure in soft ground Design and application of ground improvement for underground construction Ground movements, interaction with existing structures and mitigation measures The general reports give an overview of the papers submitted to the symposium, covered in four technical sessions. The proceedings include the written version of the five invited lectures covering topics ranging from developments in geotechnical aspects of underground construction, tunnelling and groundwater interaction (short and long-term effects), the influence of earth pressure balance shield tunnelling on pre-convergence and segmental liner loading (field observations, modelling and implications on design). Similar to previous editions, Geotechnical Aspects of Underground Construction in Soft Ground represents a valuable source of reference on the current practice of analysis, design, and construction of tunnels and deep excavations in soft ground. The book is particularly aimed at academics and professionals interested in geotechnical and underground engineering.
Author: Kui Chen
Publisher: Woodhead Publishing
ISBN: 0128201282
Category : Architecture
Languages : en
Pages : 590
Get Book Here
Book Description
Shield Construction Techniques in Tunnelling presents the latest on this fast, environmentally-friendly and relatively safe construction technique, reflecting on its technical risks and challenges as seen in China. Sections introduce the type of shields, the history of the technique, shielding principles, selection, management, the latest techniques in operation, consider engineering cases, discuss construction in gravel, soft-soil, composite, and rock strata, and present video clips of construction that are accessible through QR codes embedded in the text. The book combines theory and practical experience, giving the reader unique insights into shield equipment and construction techniques. The shield tunneling technique is being used very widely, particularly in China, which is building urban-rail transit systems at an unparalleled scale and speed. The use of tunneling-shields provides a fast, relatively-safe, and ecologically-friendly method for the construction of tunnels. However, a number of incidents have shown the risks involved in tunnelling through geologically complex areas. - Gives the principles and practice of shield construction techniques, including shield selection and operation - Demonstrates the latest technologies in shield construction that can be applied in practice - Reflects on the technical risks and challenges of shield construction, based on extensive use of the technique for tunnel construction in China - Discusses challenges in construction in gravel, soft-soil, composite and rock strata - Provides engineers with applicable insights into shield equipment and construction techniques
Author: Pijush Samui
Publisher: Academic Press
ISBN: 0128218525
Category : Technology & Engineering
Languages : en
Pages : 518
Get Book Here
Book Description
Modeling in Geotechnical Engineering is a one stop reference for a range of computational models, the theory explaining how they work, and case studies describing how to apply them. Drawing on the expertise of contributors from a range of disciplines including geomechanics, optimization, and computational engineering, this book provides an interdisciplinary guide to this subject which is suitable for readers from a range of backgrounds. Before tackling the computational approaches, a theoretical understanding of the physical systems is provided that helps readers to fully grasp the significance of the numerical methods. The various models are presented in detail, and advice is provided on how to select the correct model for your application. - Provides detailed descriptions of different computational modelling methods for geotechnical applications, including the finite element method, the finite difference method, and the boundary element method - Gives readers the latest advice on the use of big data analytics and artificial intelligence in geotechnical engineering - Includes case studies to help readers apply the methods described in their own work
Author: Jian Zhao
Publisher: CRC Press
ISBN: 0203840690
Category : Technology & Engineering
Languages : en
Pages : 882
Get Book Here
Book Description
During the last two decades rock mechanics in Europe has been undergoing some major transformation. The reduction of mining activities in Europe affects heavily on rock mechanics teaching and research at universities and institutes. At the same time, new emerging activities, notably, underground infrastructure construction, geothermal energy develo
Author: Daniele Peila
Publisher: CRC Press
ISBN: 0429755023
Category : Technology & Engineering
Languages : en
Pages : 6407
Get Book Here
Book Description
Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art contains the contributions presented at the World Tunnel Congress 2019 (Naples, Italy, 3-9 May 2019). The use of underground space is continuing to grow, due to global urbanization, public demand for efficient transportation, and energy saving, production and distribution. The growing need for space at ground level, along with its continuous value increase and the challenges of energy saving and achieving sustainable development objectives, demand greater and better use of the underground space to ensure that it supports sustainable, resilient and more liveable cities. This vision was the source of inspiration for the design of the logos of both the International (ITA) and Italian (SIG) Tunnelling Association. By placing key infrastructures underground – the black circle in the logos – it will be possible to preserve and enhance the quality of the space at ground level – the green line. In order to consider and value underground space usage together with human and social needs, engineers, architects, and artists will have to learn to collaborate and develop an interdisciplinary design approach that addresses functionality, safety, aesthetics and quality of life, and adaptability to future and varied functions. The 700 contributions cover a wide range of topics, from more traditional subjects connected to technical challenges of design and construction of underground works, with emphasis on innovation in tunneling engineering, to less conventional and archetypically Italian themes such as archaeology, architecture, and art. The book has the following main themes: Archaeology, Architecture and Art in underground construction; Environment sustainability in underground construction; Geological and geotechnical knowledge and requirements for project implementation; Ground improvement in underground constructions; Innovation in underground engineering, materials and equipment; Long and deep tunnels; Public communication and awareness; Risk management, contracts and financial aspects; Safety in underground construction; Strategic use of underground space for resilient cities; Urban tunnels. Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art is a valuable reference text for tunneling specialists, owners, engineers, architects and others involved in underground planning, design and building around the world, and for academics who are interested in underground constructions and geotechnics.
