Author: H. MEHMET. URAS
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Mid-stroke frictional power losses dominated due to high velocities - the molybdenum friction modifier had a modest effect.
MEASUREMENT OF PISTON AND RING ASSEMBLY FRICTION IN RECIPROCATING MACHINES.
Author: H. MEHMET. URAS
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Mid-stroke frictional power losses dominated due to high velocities - the molybdenum friction modifier had a modest effect.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Mid-stroke frictional power losses dominated due to high velocities - the molybdenum friction modifier had a modest effect.
Measurement of Piston and Piston Ring Assembly Friction Force
Author: Takaharu Goto
Publisher:
ISBN:
Category : Friction
Languages : en
Pages : 10
Book Description
Publisher:
ISBN:
Category : Friction
Languages : en
Pages : 10
Book Description
Measurement of Piston and Ring Assembly Friction
Author: H. Mehmet Uras
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 14
Book Description
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 14
Book Description
Piston/ring Assembly Friction Measurement and Modeling
Author: Shyh-Shyan Lin
Publisher:
ISBN:
Category :
Languages : en
Pages : 296
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 296
Book Description
Paper
Author:
Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 584
Book Description
Publisher:
ISBN:
Category : Mechanical engineering
Languages : en
Pages : 584
Book Description
Vehicle Tribology
Author: M. Godet
Publisher: Elsevier
ISBN: 0080875823
Category : Technology & Engineering
Languages : en
Pages : 537
Book Description
Vehicle Tribology was chosen as the topic for the 17th Leeds-Lyon Symposium, as it was decided to be a timely opportunity to bring together experts of many disciplines connected with problems of emissions, particulates and energy efficiency associated with the automobile engine. The volume contains 55 papers divided into eighteen sessions.
Publisher: Elsevier
ISBN: 0080875823
Category : Technology & Engineering
Languages : en
Pages : 537
Book Description
Vehicle Tribology was chosen as the topic for the 17th Leeds-Lyon Symposium, as it was decided to be a timely opportunity to bring together experts of many disciplines connected with problems of emissions, particulates and energy efficiency associated with the automobile engine. The volume contains 55 papers divided into eighteen sessions.
Instantaneous Engine Frictional Torque, Its Components and Piston Assembly Friction. Final Report
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 197
Book Description
The overall goal of this report is to document the work done to determine the instantaneous frictional torque of internal combustion engine by using a new approach known as (P-[omega]) method developed at Wayne State University. The emphasis has been to improve the accuracy of the method, and apply it to both diesel and gasoline engines under different operating conditions. Also work included an investigation to determine the effect of using advanced materials and techniques to coat the piston rings on the instantaneous engine frictional torque and the piston assembly friction. The errors in measuring the angular velocity, [omega], have been determined and found to be caused by variations in the divisions within one encoder, encoder-to-encoder variations, misalignment within the encoder itself and misalignment between the encoder and crankshaft. The errors in measuring the cylinder gas pressure, P, have been determined and found to be caused by transducer-to-transducer variations, zero drift, thermal stresses and lack of linearity. The ability of the (P-[omega]) method in determining the frictional torque of many engine components has been demonstrated. These components include valve train, fuel injection pump with and without fuel injection, and piston with and without different ring combinations. The emphasis in this part of the research program has been on the piston-ring assembly friction. The effects of load and other operating variables on IFT have been determined. The motoring test, which is widely used in industry to measure engine friction has been found to be inaccurate. The errors have been determined at different loads.
Publisher:
ISBN:
Category :
Languages : en
Pages : 197
Book Description
The overall goal of this report is to document the work done to determine the instantaneous frictional torque of internal combustion engine by using a new approach known as (P-[omega]) method developed at Wayne State University. The emphasis has been to improve the accuracy of the method, and apply it to both diesel and gasoline engines under different operating conditions. Also work included an investigation to determine the effect of using advanced materials and techniques to coat the piston rings on the instantaneous engine frictional torque and the piston assembly friction. The errors in measuring the angular velocity, [omega], have been determined and found to be caused by variations in the divisions within one encoder, encoder-to-encoder variations, misalignment within the encoder itself and misalignment between the encoder and crankshaft. The errors in measuring the cylinder gas pressure, P, have been determined and found to be caused by transducer-to-transducer variations, zero drift, thermal stresses and lack of linearity. The ability of the (P-[omega]) method in determining the frictional torque of many engine components has been demonstrated. These components include valve train, fuel injection pump with and without fuel injection, and piston with and without different ring combinations. The emphasis in this part of the research program has been on the piston-ring assembly friction. The effects of load and other operating variables on IFT have been determined. The motoring test, which is widely used in industry to measure engine friction has been found to be inaccurate. The errors have been determined at different loads.
Instantaneous Engine Frictional Torque, Its Components and Piston Assembly Friction
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 197
Book Description
The overall goal of this report is to document the work done to determine the instantaneous frictional torque of internal combustion engine by using a new approach known as (P-[omega]) method developed at Wayne State University. The emphasis has been to improve the accuracy of the method, and apply it to both diesel and gasoline engines under different operating conditions. Also work included an investigation to determine the effect of using advanced materials and techniques to coat the piston rings on the instantaneous engine frictional torque and the piston assembly friction. The errors in measuring the angular velocity, [omega], have been determined and found to be caused by variations in the divisions within one encoder, encoder-to-encoder variations, misalignment within the encoder itself and misalignment between the encoder and crankshaft. The errors in measuring the cylinder gas pressure, P, have been determined and found to be caused by transducer-to-transducer variations, zero drift, thermal stresses and lack of linearity. The ability of the (P-[omega]) method in determining the frictional torque of many engine components has been demonstrated. These components include valve train, fuel injection pump with and without fuel injection, and piston with and without different ring combinations. The emphasis in this part of the research program has been on the piston-ring assembly friction. The effects of load and other operating variables on IFT have been determined. The motoring test, which is widely used in industry to measure engine friction has been found to be inaccurate. The errors have been determined at different loads.
Publisher:
ISBN:
Category :
Languages : en
Pages : 197
Book Description
The overall goal of this report is to document the work done to determine the instantaneous frictional torque of internal combustion engine by using a new approach known as (P-[omega]) method developed at Wayne State University. The emphasis has been to improve the accuracy of the method, and apply it to both diesel and gasoline engines under different operating conditions. Also work included an investigation to determine the effect of using advanced materials and techniques to coat the piston rings on the instantaneous engine frictional torque and the piston assembly friction. The errors in measuring the angular velocity, [omega], have been determined and found to be caused by variations in the divisions within one encoder, encoder-to-encoder variations, misalignment within the encoder itself and misalignment between the encoder and crankshaft. The errors in measuring the cylinder gas pressure, P, have been determined and found to be caused by transducer-to-transducer variations, zero drift, thermal stresses and lack of linearity. The ability of the (P-[omega]) method in determining the frictional torque of many engine components has been demonstrated. These components include valve train, fuel injection pump with and without fuel injection, and piston with and without different ring combinations. The emphasis in this part of the research program has been on the piston-ring assembly friction. The effects of load and other operating variables on IFT have been determined. The motoring test, which is widely used in industry to measure engine friction has been found to be inaccurate. The errors have been determined at different loads.
SAE 1999-08-0320 Measurement devices for piston assembly friction and oil film thickness JSAE Technical Paper No. 9935347
Author: Sungwoo Cho
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
A technique for estimating the instantaneous frictional force between the piston assembly and the cylinder wall has been developed by improving the moveable bore technique. The technique can be easily applied to small multi-cylinder engines. The technique was applied to a four-cylinder SI engine under various engine speeds, engine loads and oil viscosity. An instrument for measuring the oil film thickness on the piston rings was also developed by using the commercially available gap sensors. It was possible to measure the oil film thickness on thin oil ring rails as well as on the compression rings. The frictional characteristics were established as a relationship between frictional mean effective pressure and a parameter which is the product of the piston mean speed and the oil viscosity.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
A technique for estimating the instantaneous frictional force between the piston assembly and the cylinder wall has been developed by improving the moveable bore technique. The technique can be easily applied to small multi-cylinder engines. The technique was applied to a four-cylinder SI engine under various engine speeds, engine loads and oil viscosity. An instrument for measuring the oil film thickness on the piston rings was also developed by using the commercially available gap sensors. It was possible to measure the oil film thickness on thin oil ring rails as well as on the compression rings. The frictional characteristics were established as a relationship between frictional mean effective pressure and a parameter which is the product of the piston mean speed and the oil viscosity.
Low-Engine-Friction Technology for Advanced Natural-Gas Reciprocating Engines
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
This program aims at improving the efficiency of advanced natural-gas reciprocating engines (ANGRE) by reducing piston and piston ring assembly friction without major adverse effects on engine performance, such as increased oil consumption and wear. An iterative process of simulation, experimentation and analysis has been followed towards achieving the goal of demonstrating a complete optimized low-friction engine system. In this program, a detailed set of piston and piston-ring dynamic and friction models have been adapted and applied that illustrate the fundamental relationships among mechanical, surface/material and lubricant design parameters and friction losses. Demonstration of low-friction ring-pack designs in the Waukesha VGF 18GL engine confirmed ring-pack friction reduction of 30-40%, which translates to total engine FEMP (friction mean effective pressure) reduction of 7-10% from the baseline configuration without significantly increasing oil consumption or blow-by flow. The study on surface textures, including roughness characteristics, cross hatch patterns, dimples and grooves have shown that even relatively small-scale changes can have a large effect on ring/liner friction, in some cases reducing FMEP by as much as 30% from a smooth surface case. The measured FMEP reductions were in good agreement with the model predictions. The combined analysis of lubricant and surface design indicates that low-viscosity lubricants can be very effective in reducing friction, subject to component wear for extremely thin oils, which can be mitigated with further lubricant formulation and/or engineered surfaces. Hence a combined approach of lubricant design and appropriate wear reduction offers improved potential for minimum engine friction loss. Testing of low-friction lubricants showed that total engine FMEP reduced by up to (almost equal to)16.5% from the commercial reference oil without significantly increasing oil consumption or blow-by flow. Piston friction studies indicate that a flatter piston with a more flexible skirt, together with optimizing the waviness and film thickness on the piston skirt offer significant friction reduction. Combined with low-friction ring-pack, material and lubricant parameters, a total power cylinder friction reduction of 30-50% is expected, translating to an engine efficiency increase of two percentage points from its current baseline towards the goal of 50% ARES engine efficiency. The design strategies developed in this study have promising potential for application in all modern reciprocating engines as they represent simple, low-cost methods to extract significant fuel savings. The current program has possible spinoffs and applications in other industries as well, including transportation, CHP, and diesel power generation. The progress made in this program has wide engine efficiency implications, and potential deployment of low-friction engine components or lubricants in the near term is quite possible.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
This program aims at improving the efficiency of advanced natural-gas reciprocating engines (ANGRE) by reducing piston and piston ring assembly friction without major adverse effects on engine performance, such as increased oil consumption and wear. An iterative process of simulation, experimentation and analysis has been followed towards achieving the goal of demonstrating a complete optimized low-friction engine system. In this program, a detailed set of piston and piston-ring dynamic and friction models have been adapted and applied that illustrate the fundamental relationships among mechanical, surface/material and lubricant design parameters and friction losses. Demonstration of low-friction ring-pack designs in the Waukesha VGF 18GL engine confirmed ring-pack friction reduction of 30-40%, which translates to total engine FEMP (friction mean effective pressure) reduction of 7-10% from the baseline configuration without significantly increasing oil consumption or blow-by flow. The study on surface textures, including roughness characteristics, cross hatch patterns, dimples and grooves have shown that even relatively small-scale changes can have a large effect on ring/liner friction, in some cases reducing FMEP by as much as 30% from a smooth surface case. The measured FMEP reductions were in good agreement with the model predictions. The combined analysis of lubricant and surface design indicates that low-viscosity lubricants can be very effective in reducing friction, subject to component wear for extremely thin oils, which can be mitigated with further lubricant formulation and/or engineered surfaces. Hence a combined approach of lubricant design and appropriate wear reduction offers improved potential for minimum engine friction loss. Testing of low-friction lubricants showed that total engine FMEP reduced by up to (almost equal to)16.5% from the commercial reference oil without significantly increasing oil consumption or blow-by flow. Piston friction studies indicate that a flatter piston with a more flexible skirt, together with optimizing the waviness and film thickness on the piston skirt offer significant friction reduction. Combined with low-friction ring-pack, material and lubricant parameters, a total power cylinder friction reduction of 30-50% is expected, translating to an engine efficiency increase of two percentage points from its current baseline towards the goal of 50% ARES engine efficiency. The design strategies developed in this study have promising potential for application in all modern reciprocating engines as they represent simple, low-cost methods to extract significant fuel savings. The current program has possible spinoffs and applications in other industries as well, including transportation, CHP, and diesel power generation. The progress made in this program has wide engine efficiency implications, and potential deployment of low-friction engine components or lubricants in the near term is quite possible.