Author: Michael Field
Publisher:
ISBN:
Category : Machining
Languages : en
Pages : 56
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. Specifically, this report, the sixth of a series, pertains to tapping. The remaining report in this series will be issued separately as: Reaming (Report No. 66-1.7). Upon completion, all reports will be collected in a single volume (Report No. 66-1). The previous reports are Turning, No. 66-1.1; Face Milling, No. 66-1.2; Drilling, No. 66-1.3; Peripheral End Milling, No. 66-1.4; and End Mill Slotting, No. 66-1.5. (Author).
Machining Data for Numerical Control End Mill Slotting
Author: Michael Field
Publisher:
ISBN:
Category : Machining
Languages : en
Pages : 56
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. Specifically, this report, the sixth of a series, pertains to tapping. The remaining report in this series will be issued separately as: Reaming (Report No. 66-1.7). Upon completion, all reports will be collected in a single volume (Report No. 66-1). The previous reports are Turning, No. 66-1.1; Face Milling, No. 66-1.2; Drilling, No. 66-1.3; Peripheral End Milling, No. 66-1.4; and End Mill Slotting, No. 66-1.5. (Author).
Publisher:
ISBN:
Category : Machining
Languages : en
Pages : 56
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. Specifically, this report, the sixth of a series, pertains to tapping. The remaining report in this series will be issued separately as: Reaming (Report No. 66-1.7). Upon completion, all reports will be collected in a single volume (Report No. 66-1). The previous reports are Turning, No. 66-1.1; Face Milling, No. 66-1.2; Drilling, No. 66-1.3; Peripheral End Milling, No. 66-1.4; and End Mill Slotting, No. 66-1.5. (Author).
Machining Data for Numerical Control End Mill Slotting
Author: Michael Field
Publisher:
ISBN:
Category : Machining
Languages : en
Pages : 52
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. Specifically, this report, the sixth of a series, pertains to tapping. The remaining report in this series will be issued separately as: Reaming (Report No. 66-1.7). Upon completion, all reports will be collected in a single volume (Report No. 66-1). The previous reports are Turning, No. 66-1.1; Face Milling, No. 66-1.2; Drilling, No. 66-1.3; Peripheral End Milling, No. 66-1.4; and End Mill Slotting, No. 66-1.5. (Author).
Publisher:
ISBN:
Category : Machining
Languages : en
Pages : 52
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. Specifically, this report, the sixth of a series, pertains to tapping. The remaining report in this series will be issued separately as: Reaming (Report No. 66-1.7). Upon completion, all reports will be collected in a single volume (Report No. 66-1). The previous reports are Turning, No. 66-1.1; Face Milling, No. 66-1.2; Drilling, No. 66-1.3; Peripheral End Milling, No. 66-1.4; and End Mill Slotting, No. 66-1.5. (Author).
Machining Data for Numerical Control Face Milling
Author: Michael Field
Publisher:
ISBN:
Category : Machining
Languages : en
Pages : 88
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, width, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situatuion involving the materials for which machining data are presented. Specifically this report, the second of a series, pertains to face milling. (Author).
Publisher:
ISBN:
Category : Machining
Languages : en
Pages : 88
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, width, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situatuion involving the materials for which machining data are presented. Specifically this report, the second of a series, pertains to face milling. (Author).
Machining Data for Numerical Control Drilling
Author: Michael Field
Publisher:
ISBN:
Category : Drilling and boring machinery
Languages : en
Pages : 72
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. Specifically this report, the third of a series, pertains to drilling.
Publisher:
ISBN:
Category : Drilling and boring machinery
Languages : en
Pages : 72
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. Specifically this report, the third of a series, pertains to drilling.
Machining Data for Numerical Control Reaming
Author: Michael Field
Publisher:
ISBN:
Category : Machining
Languages : en
Pages : 38
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. Specifically this report, the last of a series, pertains to reaming. The previous reports in this series were issued separately as: Turning, Face Milling, Drilling, Peripheral End Milling, End Mill Slotting, and Tapping (Report Nos. AFMDC 66-1.1 through 66-1.6). All reports will be collected in a single volume (Report No. AFMDC 66-1). (Author).
Publisher:
ISBN:
Category : Machining
Languages : en
Pages : 38
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool material, tool geometry, cutting fluid, depth, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. Specifically this report, the last of a series, pertains to reaming. The previous reports in this series were issued separately as: Turning, Face Milling, Drilling, Peripheral End Milling, End Mill Slotting, and Tapping (Report Nos. AFMDC 66-1.1 through 66-1.6). All reports will be collected in a single volume (Report No. AFMDC 66-1). (Author).
Technical Abstract Bulletin
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 760
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 760
Book Description
U.S. Government Research & Development Reports
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 212
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 212
Book Description
Government-wide Index to Federal Research & Development Reports
Author:
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1352
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1352
Book Description
Selected Advances in Tools, Dies, Jigs, and Fixtures Technology
Author: United States. Small Business Administration. Technology Utilization Division
Publisher:
ISBN:
Category : Dies (Metal-working)
Languages : en
Pages : 36
Book Description
Publisher:
ISBN:
Category : Dies (Metal-working)
Languages : en
Pages : 36
Book Description
Machining Data for Numerical Control
Author: Air Force Machinability Data Center
Publisher:
ISBN:
Category : Machine-tools
Languages : en
Pages : 316
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool materials, tool geometry, cutting fluid, depth, width, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. This report covers: Turning, Face Milling, Drilling, Peripheral End Milling, End Mill Slotting, Tapping, and Reaming. (Author).
Publisher:
ISBN:
Category : Machine-tools
Languages : en
Pages : 316
Book Description
This report presents an extensive set of machining data selected from six USAF Machinability Reports. Data are tabulated and arranged in formats including machining variables such as tool materials, tool geometry, cutting fluid, depth, width, feed, and tool life end point. For each of the data lines, the relationship between tool life and cutting speed is expressed in at least three sets of data, thereby making it possible to optimize for maximum production or minimum cost. While these data are expected to be of considerable assistance in providing data for numerical control applications, they are also of great value in any type of machining situation involving the materials for which machining data are presented. This report covers: Turning, Face Milling, Drilling, Peripheral End Milling, End Mill Slotting, Tapping, and Reaming. (Author).