IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials PDF full book. Access full book title IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials by André Pineau. Download full books in PDF and EPUB format.
Author: André Pineau
Publisher: Springer Science & Business Media
ISBN: 9400917562
Category : Technology & Engineering
Languages : en
Pages : 442
Get Book Here
Book Description
The IUT AM Symposium on "Micromechanics of Plasticity and Damage of Multiphase Materials" was held in Sevres, Paris, France, 29 August - 1 September 1995. The Symposium was attended by 83 persons from 18 countries. In addition 17 young French students attended the meeting. During the 4 day meeting, a total of 55 papers were presented, including 24 papers in the poster sessions. The meeting was divided into 7 oral and 3 poster sessions. The 7 oral sessions were the following: - Plasticity and Viscoplasticity I and II; - Phase transformations; - Damage I and II; - Statistical and geometrical aspects; - Cracks and interfaces. Each poster session was introduced by a Rapporteur, as follows: - Session I (Plasticity and Viscoplasticity): G. Cailletaud; - Session 2 (Damage): D. Franc;:ois; - Session 3 (Phase transformation; statistical and geometrical aspects): D. Jeulin. The main purpose of the Symposium was the discussion of the state of the art in the development of micromechanical models used to predict the macroscopic mechanical behaviour of mUltiphase solid materials. These materials consist of at least two chemically different phases, present either initially or formed during plastic deformation, when a strain-induced phase transformation takes place. One session was devoted to the latter case. Continuously strengthened composite materials, containing long fibers, were out of the scope of the Symposium.
Author: André Pineau
Publisher: Springer Science & Business Media
ISBN: 9400917562
Category : Technology & Engineering
Languages : en
Pages : 442
Get Book Here
Book Description
The IUT AM Symposium on "Micromechanics of Plasticity and Damage of Multiphase Materials" was held in Sevres, Paris, France, 29 August - 1 September 1995. The Symposium was attended by 83 persons from 18 countries. In addition 17 young French students attended the meeting. During the 4 day meeting, a total of 55 papers were presented, including 24 papers in the poster sessions. The meeting was divided into 7 oral and 3 poster sessions. The 7 oral sessions were the following: - Plasticity and Viscoplasticity I and II; - Phase transformations; - Damage I and II; - Statistical and geometrical aspects; - Cracks and interfaces. Each poster session was introduced by a Rapporteur, as follows: - Session I (Plasticity and Viscoplasticity): G. Cailletaud; - Session 2 (Damage): D. Franc;:ois; - Session 3 (Phase transformation; statistical and geometrical aspects): D. Jeulin. The main purpose of the Symposium was the discussion of the state of the art in the development of micromechanical models used to predict the macroscopic mechanical behaviour of mUltiphase solid materials. These materials consist of at least two chemically different phases, present either initially or formed during plastic deformation, when a strain-induced phase transformation takes place. One session was devoted to the latter case. Continuously strengthened composite materials, containing long fibers, were out of the scope of the Symposium.
Author: Y.L. Bai
Publisher: Springer Science & Business Media
ISBN: 1402056249
Category : Technology & Engineering
Languages : en
Pages : 260
Get Book Here
Book Description
This volume contains the proceedings of the IUTAM Symposium on Mechanical Behavior and Micro-mechanics of Nanostructured Materials, held in Beijing on June 27-30, 2005. The proceedings consist of approximately 30 presentations. Nano-scale, micro-scale, theoretical, experimental and numerical aspects of the subjects are covered. A wide scope of research and progress are displayed. This is the first work in print on this particular subject.
Author: R.W. Snidle
Publisher: Springer Science & Business Media
ISBN: 1402045336
Category : Technology & Engineering
Languages : en
Pages : 438
Get Book Here
Book Description
This volume contains the proceedings of the IUTAM Symposium on Elastohydrodynamics and Microelastohydrodynamics held in Cardiff from 1-3 September 2004. It contains 31 articles by leading researchers in the field. The symposium focused on theoretical, experimental and computational issues in elastohydrodynamic lubrication (EHL) both in relation to smooth surfaces and in situations where the film is of the same order or thinner than the surface roughness (micro-EHL). The last IUTAM Symposium in this general area of contact of deformable bodies was in 1974. The emphasis in the Symposium was upon fundamental issues such as: solution methods; lubricant rheological models, thermal effects; both low and high elastic modulus situations; human and replacement joints; fluid traction; dynamic effects, asperity lubrication and the failure of lubrication; surface fatigue and thermal distress under EHL conditions. The book will be useful to those active in basic elastohydrodynamics research who wish to gain an up-to-date understanding of the subject from leading experts in the field.
Author: I.G. Goryacheva
Publisher: Springer Science & Business Media
ISBN: 9401590486
Category : Science
Languages : en
Pages : 356
Get Book Here
Book Description
Tribology is the science of friction, lubrication and wear of moving components. Results obtained from tribology are used to reduce energy losses in friction pro cesses, to reduce material losses due to wear, and to increase the service life of components. Contact Mechanics plays an important role in Tribology. Contact Mechanics studies the stress and strain states of bodies in contact; it is contact that leads to friction interaction and wear. This book investigates a variety of contact problems: discrete contact of rough surfaces, the effect of imperfect elasticity and mechanical inhomogeneity of contacting bodies, models of friction and wear, changes in contact characteristics during the wear process, etc. The results presented in this book were obtained during my work at the Insti tute for Problems in Mechanics of the Russian Academy of Sciences. The first steps of this research were carried out under the supervision of Professor L. A. Galin who taught me and showed me the beauty of scientific research and solutions. Some of the problems included in the book were investigated together with my col leagues Dr. M. N. Dobychin, Dr. O. G. Chekina, Dr. I. A. Soldatenkov, and Dr. E. V. Tor skaya from the Laboratory of Friction and Wear (IPM RAS) and Prof. F. Sadeghi from Purdue University (West Lafayette, USA). I would like to express my thanks to them. I am very grateful to Professor G. M. L.
Author: Tadeusz Burczynski
Publisher: Springer Science & Business Media
ISBN: 1402022670
Category : Science
Languages : en
Pages : 372
Get Book Here
Book Description
Proceedings of the IUTAM Symposium held in Cracow, Poland, 24-27 September 2002
Author: Anthony D. Rosato
Publisher: Springer Science & Business Media
ISBN: 9401594988
Category : Technology & Engineering
Languages : en
Pages : 346
Get Book Here
Book Description
Segregation is a pervasive phenomenon whereby a flowing granular mass consisting of particles with diverse physical properties becomes spatially inhomogeneous. In the industrial sector that deals with the handling and processing of bulk solids, this non-uniformity is highly undesirable since blend homogeneity is generally a stringent requirement of most products. In the arena of geophysical flows, segregation can enhance the destructive capabilities of natural events such as avalanches and landslides. During the last 15 years, these issues have provided motivation and fostered collaborations between the communities of mathematicians, engineers, industrial researchers, and physicists to develop predictive models of segregation by integrating the perspectives and approaches of each. The collection of unique papers brings to light many of the perplexing scientific and technical issues in our current understanding of this complex phenomenon. It addresses advances in experiment, computational modeling and theory. This volume is one of the very few books devoted entirely to problems of segregation of particulate solids.
Author: S Gummadi
Publisher: Springer Science & Business Media
ISBN: 9401008868
Category : Mathematics
Languages : en
Pages : 341
Get Book Here
Book Description
Nonlinearity and stochastic structural dynamics is of common interest to engineers and applied scientists belonging to many disciplines. Recent research in this area has been concentrated on the response and stability of nonlinear mechanical and structural systems subjected to random escitation. Simultaneously the focus of research has also been directed towards understanding intrinsic nonlinear phenomena like bifurcation and chaos in deterministic systems. These problems demand a high degree of sophistication in the analytical and numerical approaches. At the same time they arise from considerations of nonlinear system response to turbulence, earthquacke, wind, wave and guidancy excitations. The topic thus attracts votaries of both analytical rigour and practical applications. This books gives important and latest developments in the field presenting in a coherent fashion the research findings of leading international groups working in the area of nonlinear random vibration and chaos.
Author: Ulrich Gabbert
Publisher: Springer Science & Business Media
ISBN: 9780792369684
Category : Technology & Engineering
Languages : en
Pages : 388
Get Book Here
Book Description
Proceedings of the IUTAM Symposium on Smart Structures and Structronic Systems, held in Magdeburg, Germany, 26-29 September 2000
Author: Dimitrios A. Sotiropoulos
Publisher: Springer Science & Business Media
ISBN: 030646957X
Category : Science
Languages : en
Pages : 194
Get Book Here
Book Description
This book is a collection of selected reviewed papers that were presented at the International Union of Theoretical and Applied Mechanics Symposium "Mechanical waves for composite structures characterization". The Symposium took place June 14-17, 2000 in Chania, Crete, Greece. As is customary, IUTAM Symposia Proceedings are published in the series "Solid Mechanics and Its Applications" by Kluwer Academic Publishers. I am indebted to Professor G. M. L. Gladwell who is the series editor. I would also like to take this opportunity to express my sincere gratitude to Professor M. A. Hayes the Secretary General of the International Union of Theoretical and Applied Mechanics and a member ofthe Symposium's Scientific Committee. His constant encouragement and support made the Symposium not only possible but also successful. To the success also contributed all the members of the Symposium's Scientific Committee which I had the honor to chair. I express my appreciation to each one of them who are: Professor J. D. Achenbach (Northwestern University, Evanston, Illinois, USA), Professor M. A. Hayes (University College, Dublin, Ireland), Professor K. J. Langenberg (University of Kassel, Germany), Professor A. K. Mal (University of California, Los Angeles, USA), Professor X. Markenscoff (University of California, San Diego, USA), Professor S. Nair (Illinois Institute of Technology, Chicago, USA), Professor R. W. Ogden (University of Glasgow, UK), Professor G.
Author: J.P. Dempsey
Publisher: Springer Science & Business Media
ISBN: 9401597359
Category : Science
Languages : en
Pages : 479
Get Book Here
Book Description
This Volume constitutes the Proceedings of the IUTAM Symposium on 'Scaling Laws in Ice Mechanics and Ice Dynamics', held in Fairbanks, Alaska from 13th to 16th of June 2000. Ice mechanics deals with essentially intact ice: in this discipline, descriptions of the motion and deformation of Arctic/ Antarctic and river/lake ice call for the development of physically based constitutive and fracture models over an enormous range in scale: 0.01 m - 10 km. Ice dynamics, on the other hand, deals with the movement of broken ice: descriptions of an aggregate of ice floes call for accurate modeling of momentum transfer through the sea/ice system, again over an enormous range in scale: 1 km (floe scale) - 500 km (basin scale). For ice mechanics, the emphasis on lab-scale (0.01 - 0.5 m) research con trasts with applications at the scale of order 1 km (ice-structure interaction, icebreaking); many important upscaling questions remain to be explored.
