How Chip Size Impacts Steam Pretreatment Effectiveness for Biological Conversion of Poplar Wood Into Fermentable Sugars

How Chip Size Impacts Steam Pretreatment Effectiveness for Biological Conversion of Poplar Wood Into Fermentable Sugars PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
We report that woody biomass is highly recalcitrant to enzymatic sugar release and often requires significant size reduction and severe pretreatments to achieve economically viable sugar yields in biological production of sustainable fuels and chemicals. However, because mechanical size reduction of woody biomass can consume significant amounts of energy, it is desirable to minimize size reduction and instead pretreat larger wood chips prior to biological conversion. To date, however, most laboratory research has been performed on materials that are significantly smaller than applicable in a commercial setting. As a result, there is a limited understanding of the effects that larger biomass particle size has on the effectiveness of steam explosion pretreatment and subsequent enzymatic hydrolysis of wood chips. To address these concerns, novel downscaled analysis and high throughput pretreatment and hydrolysis (HTPH) were applied to examine whether differences exist in the composition and digestibility within a single pretreated wood chip due to heterogeneous pretreatment across its thickness. Heat transfer modeling, Simons' stain testing, magnetic resonance imaging (MRI), and scanning electron microscopy (SEM) were applied to probe the effects of pretreatment within and between pretreated wood samples to shed light on potential causes of variation, pointing to enzyme accessibility (i.e., pore size) distribution being a key factor dictating enzyme digestibility in these samples. Application of these techniques demonstrated that the effectiveness of pretreatment of Populus tremuloides can vary substantially over the chip thickness at short pretreatment times, resulting in spatial digestibility effects and overall lower sugar yields in subsequent enzymatic hydrolysis. Finally, these results indicate that rapid decompression pretreatments (e.g., steam explosion) that specifically alter accessibility at lower temperature conditions are well suited for larger wood chips due to the non-uniformity in temperature and digestibility profiles that can result from high temperature and short pretreatment times. Furthermore, this study also demonstrated that wood chips were hydrated primarily through the natural pore structure during pretreatment, suggesting that preserving the natural grain and transport systems in wood during storage and chipping processes could likely promote pretreatment efficacy and uniformity.

How Chip Size Impacts Steam Pretreatment Effectiveness for Biological Conversion of Poplar Wood Into Fermentable Sugars

How Chip Size Impacts Steam Pretreatment Effectiveness for Biological Conversion of Poplar Wood Into Fermentable Sugars PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
We report that woody biomass is highly recalcitrant to enzymatic sugar release and often requires significant size reduction and severe pretreatments to achieve economically viable sugar yields in biological production of sustainable fuels and chemicals. However, because mechanical size reduction of woody biomass can consume significant amounts of energy, it is desirable to minimize size reduction and instead pretreat larger wood chips prior to biological conversion. To date, however, most laboratory research has been performed on materials that are significantly smaller than applicable in a commercial setting. As a result, there is a limited understanding of the effects that larger biomass particle size has on the effectiveness of steam explosion pretreatment and subsequent enzymatic hydrolysis of wood chips. To address these concerns, novel downscaled analysis and high throughput pretreatment and hydrolysis (HTPH) were applied to examine whether differences exist in the composition and digestibility within a single pretreated wood chip due to heterogeneous pretreatment across its thickness. Heat transfer modeling, Simons' stain testing, magnetic resonance imaging (MRI), and scanning electron microscopy (SEM) were applied to probe the effects of pretreatment within and between pretreated wood samples to shed light on potential causes of variation, pointing to enzyme accessibility (i.e., pore size) distribution being a key factor dictating enzyme digestibility in these samples. Application of these techniques demonstrated that the effectiveness of pretreatment of Populus tremuloides can vary substantially over the chip thickness at short pretreatment times, resulting in spatial digestibility effects and overall lower sugar yields in subsequent enzymatic hydrolysis. Finally, these results indicate that rapid decompression pretreatments (e.g., steam explosion) that specifically alter accessibility at lower temperature conditions are well suited for larger wood chips due to the non-uniformity in temperature and digestibility profiles that can result from high temperature and short pretreatment times. Furthermore, this study also demonstrated that wood chips were hydrated primarily through the natural pore structure during pretreatment, suggesting that preserving the natural grain and transport systems in wood during storage and chipping processes could likely promote pretreatment efficacy and uniformity.

Emerging Technologies for Biorefineries, Biofuels, and Value-Added Commodities

Emerging Technologies for Biorefineries, Biofuels, and Value-Added Commodities PDF Author: Zhi-Hua Liu
Publisher: Springer Nature
ISBN: 3030655849
Category : Technology & Engineering
Languages : en
Pages : 398

Get Book Here

Book Description
This book provides in-depth coverage on the latest concepts, systems, and technologies that are being utilized in biorefineries for the production of biofuels and value-added commodities. Written by internationally recognized experts, the book provides a comprehensive overview of pretreatment technology for biorefineries and biofuels, enzymatic hydrolysis and fermentation technology for biofuel production, and lignin valorization for developing new products from waste lignin. The book will be a valuable resource for researchers and professionals working in process engineering, product engineering, material science, and systems and synthetic biology in the fields of biorefining, biofuel, biomaterials, environmental waste utilization, and biotechnology.

How Wood Chip Size Affects Pretreatment Effectiveness of Woody Biomass for Biological Processing

How Wood Chip Size Affects Pretreatment Effectiveness of Woody Biomass for Biological Processing PDF Author: Jerry Tam
Publisher:
ISBN: 9781303507434
Category : Enzymatic analysis
Languages : en
Pages : 76

Get Book Here

Book Description
Woody biomass is particularly resistant to breakdown and must be size reduced to make pretreatment with steam, acid, or other chemicals effective. However, because mechanical size reduction of woody biomass can consume significant amounts of energy, it is important to understand how to minimize size reduction, while still realizing high sugar yields from the combined operations of pretreatment and enzymatic hydrolysis. Thus, this study focused on determining how sugar yields change with particle size. Downscaled composition analysis and enzymatic hydrolysis were applied to different sized wood chips and powder of Populus tremuloides to examine whether wood chips could perform similarly to powder. It was found that above a certain pretreatment severity range (R0=3.8), large wood chips could give higher enzymatic sugar yields, so that size reduction is not always required, thus saving energy. Furthermore, models were applied to better understand whether heat transfer affected pretreatment effectiveness and establish maximum dimensions for high sugar release.

Feedstock-based Bioethanol Fuels. II. Waste Feedstocks

Feedstock-based Bioethanol Fuels. II. Waste Feedstocks PDF Author: Ozcan Konur
Publisher: CRC Press
ISBN: 1000958345
Category : Technology & Engineering
Languages : en
Pages : 407

Get Book Here

Book Description
This book provides an overview of research on the production of bioethanol fuels from waste feedstocks such as second-generation residual sugar and starch feedstocks, food waste, industrial waste, urban waste, forestry waste, and lignocellulosic biomass at large with 17 chapters. In this context, there are eight sections where the first two chapters cover the production of bioethanol fuels from waste feedstocks at large. This book is the fourth volume in the Handbook of Bioethanol Fuels (Six-Volume Set). It shows that pretreatments and hydrolysis of the waste feedstocks, fermentation of hydrolysates, and separation and distillation of bioethanol fuels are the fundamental processes for bioethanol fuel production from these waste feedstocks. This book is a valuable resource for stakeholders primarily in research fields of energy and fuels, chemical engineering, environmental science and engineering, biotechnology, microbiology, chemistry, physics, mechanical engineering, agricultural sciences, food science and engineering, materials science, biochemistry, genetics, molecular biology, plant sciences, water resources, economics, business and management, transportation science and technology, ecology, public, environmental and occupational health, social sciences, toxicology, multi-disciplinary sciences, and humanities among others.

Poplar Culture in North America

Poplar Culture in North America PDF Author: National Research Council Canada
Publisher: NRC Research Press
ISBN: 9780660181455
Category : Nature
Languages : en
Pages : 424

Get Book Here

Book Description
Acknowledgements -- References -- Chapter 5. Ecology and silviculture of poplar plantations -- Introduction -- Propagation and production of planting stock -- Planting stock types -- Stock production systems -- Unrooted dormant cuttings and sets -- Weed control strategies -- Fertilization and irrigation -- Crop health, protection, and hygiene -- Unrooted dormant branch cuttings -- Rooted dormant cuttings -- Container nursery for rooted plants -- Stock harvesting, processing, and quality control -- Harvesting -- Processing -- Quality control -- Stock packaging and storage.

Ionic Liquid Pretreatment of Poplar Wood at Room Temperature

Ionic Liquid Pretreatment of Poplar Wood at Room Temperature PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
Lignocellulosic biomass represents a potentially sustainable source of liquid fuels and commodity chemicals. It could satisfy the energy needs for transportation and electricity generation, while contributing substantially to carbon sequestration and limiting the accumulation of greenhouse gases in the atmosphere. Potential feedstocks are abundant and include crops, agricultural wastes, forest products, grasses, and algae. Among those feedstocks, wood is mainly constituted of three components: cellulose, hemicellulose, and lignin. The conversion process of lignocellulosic biomass typically consists of three steps: (1) pretreatment; (2) hydrolysis of cellulose and hemicellulose into fermentable sugars; and (3) fermentation of the sugars into liquid fuels (ethanol) and other commodity chemicals. The pretreatment step is necessary due to the complex structure of the plant cell wall and the chemical resistance of lignin. Most current pretreatments are energy-intensive and/or polluting. So it is imperative to develop new pretreatments that are economically viable and environmentally friendly. Recently, ionic liquids have attracted considerable interest, due to their ability to dissolve biopolymers, such as cellulose, lignin, native switchgrass, and others. Ionic liquids are also considered green solvents, since they have been successfully recycled at high yields for further use with limited efficiency loss. Also, a few microbial cellulases remain active at high ionic liquid concentration. However, all studies on the dissolution of wood in ionic liquids have been conducted so far at high temperatures, typically above 90 C. Development of alternative pretreatments at room temperature is desirable to eliminate the additional energy cost. In this study, thin sections of poplar wood were swollen at room temperature by a 3 h ionic liquid (1-ethyl-3-methylimidazolium acetate or EMIMAc) pretreatment. The pretreated sample was then exposed to an aqueous suspension of nanoparticles that resulted in the sample contraction and the deposition of nanoparticles onto the surface and embedded into the cell wall. To date, both silver and gold particles ranging in size from 40-100 nm have been incorporated into wood. Penetration of gold nanoparticles of 100 nm diameter in the cell walls was best confirmed by near-infrared confocal Raman microscopy, since the deposition of gold nanoparticles induces a significant enhancement of the Raman signal from the wood in their close proximity, an enhancement attributed to the surface-enhanced Raman effect (SERS). After rinsing with water, scanning electron microscopy (SEM) and Raman images of the same areas show that most nanoparticles remained on the pretreated sample. Raman images at different depths reveal that a significant number of nanoparticles were incorporated into the wood sample, at depths up to 4 [mu]m, or 40 times the diameter of the nanoparticles. Control experiments on an untreated wood sample resulted in the deposition of nanoparticles only at the surface and most nanoparticles were removed upon rinsing. This particle incorporation process enables the development of new pretreatments, since the nanoparticles have a high surface-to-volume ratio and could be chemically functionalized. Other potential applications for the incorporated nanoparticles include isotope tracing, catalysis, imaging agents, drug-delivery systems, energy-storage devices, and chemical sensors.

Sustainable Degradation of Lignocellulosic Biomass

Sustainable Degradation of Lignocellulosic Biomass PDF Author: Anuj Chandel
Publisher: BoD – Books on Demand
ISBN: 9535111191
Category : Technology & Engineering
Languages : en
Pages : 288

Get Book Here

Book Description
This book provides important aspects of sustainable degradation of lignocellulosic biomass which has a pivotal role for the economic production of several value-added products and biofuels with safe environment. Different pretreatment techniques and enzymatic hydrolysis process along with the characterization of cell wall components have been discussed broadly. The following features of this book attribute its distinctiveness: This book comprehensively covers the improvement in methodologies for the biomass pretreatment, hemicellulose and cellulose breakdown into fermentable sugars, the analytical methods for biomass characterization, and bioconversion of cellulosics into biofuels. In addition, mechanistic analysis of biomass pretreatment and enzymatic hydrolysis have been discussed in details, highlighting key factors influencing these processes at industrial scale.

Lignocellulose Conversion

Lignocellulose Conversion PDF Author: Vincenza Faraco
Publisher: Springer Science & Business Media
ISBN: 3642378617
Category : Science
Languages : en
Pages : 207

Get Book Here

Book Description
Bioethanol has been recognized as a potential alternative to petroleum-derived transportation fuels. Even if cellulosic biomass is less expensive than corn and sugarcane, the higher costs for its conversion make the near-term price of cellulosic ethanol higher than that of corn ethanol and even more than that of sugarcane ethanol. Conventional process for bioethanol production from lignocellulose includes a chemical/physical pre-treatment of lignocellulose for lignin removal, mostly based on auto hydrolysis and acid hydrolysis, followed by saccharification of the free accessible cellulose portions of the biomass. The highest yields of fermentable sugars from cellulose portion are achieved by means of enzymatic hydrolysis, currently carried out using a mix of cellulases from the fungus Trichoderma reesei. Reduction of (hemi)cellulases production costs is strongly required to increase competitiveness of second generation bioethanol production. The final step is the fermentation of sugars obtained from saccharification, typically performed by the yeast Saccharomyces cerevisiae. The current process is optimized for 6-carbon sugars fermentation, since most of yeasts cannot ferment 5-carbon sugars. Thus, research is aimed at exploring new engineered yeasts abilities to co-ferment 5- and 6-carbon sugars. Among the main routes to advance cellulosic ethanol, consolidate bio-processing, namely direct conversion of biomass into ethanol by a genetically modified microbes, holds tremendous potential to reduce ethanol production costs. Finally, the use of all the components of lignocellulose to produce a large spectra of biobased products is another challenge for further improving competitiveness of second generation bioethanol production, developing a biorefinery.

Improving Carbohydrate Recovery from Uncatalyzed Steam Pretreated Hybrid Poplar

Improving Carbohydrate Recovery from Uncatalyzed Steam Pretreated Hybrid Poplar PDF Author: Chang Dou
Publisher:
ISBN:
Category : Biomass chemicals
Languages : en
Pages : 74

Get Book Here

Book Description
The presence of SO2 in steam pretreatment creates a series of problems in environmental protection, equipment corrosion, chemical catalysis and waste water treatment. Moreover, SO2 increases the pretreatment severity, resulting in more sugar degradation and increased inhibitor formation. In this study, hybrid poplar chips were steam exploded using 6 different conditions with or without the addition of SO2. The steaming temperature ranged from 190 °C to 212 °C, and the residence time ranged from 5 min to 10 min, resulting in a range of fermentation inhibitors, including furfural, 5-hydroxymethyl furfural (HMF), acetic acid and phenolic. It was found that certain concentration of inhibitors, particularly acetic acid, could promote the ethanol yield in hydrolysate fermentation, but always impairs the xylitol yield due to the acetyled xylan in hybrid poplar. At the lowest pretreatment severity condition at 205 °C, 10 minutes, without SO2, the best inhibitor concentration for ethanol yield and the highest overall sugar recovery following pretreatment were achieved. However, since no SO2 was applied, poor digestibility during enzymatic hydrolysis of cellulose reduced the post-hydrolysis sugar recovery. For that reason, mechanical refining was applied to the solid fractions and improved the enzymatic hydrolysis for solids pretreated at 205 °C for 10 minutes, without SO2 as much as 23 %. Similar improvements were observed for different enzyme loadings and solid consistencies. However, refining did not improve the hydrolyzability of solids pretreated at five other conditions. Reduced particle sizes were found to be correlated to increased sugar yields in enzymatic hydrolysis. Solids pretreated at 205 °C 10 minutes, without SO2 exhibited the largest size reduction after refining and correspondingly achieved the highest overall sugar recovery improvement after steam pretreatment and enzymatic hydrolysis. In general, refining can enable a catalyst free, low inhibitor concentration, high overall sugar recovery bioconversion system based on the steam pretreatment and enzymatic hydrolysis method.

Lignocellulosic Materials

Lignocellulosic Materials PDF Author:
Publisher: Springer
ISBN: 9783662151051
Category : Science
Languages : en
Pages : 159

Get Book Here

Book Description