Author: Nerijus Armakavicius
Publisher: Linköping University Electronic Press
ISBN: 917685132X
Category :
Languages : en
Pages : 62
Book Description
Development of silicon based electronics have revolutionized our every day life during the last five decades. Nowadays silicon based devices operate close to their theoretical limits that is becoming a bottleneck for further progress. In particular, for the growing field of high frequency and high power electronics, silicon cannot offer the required properties. Development of materials capable of providing high current densities, carrier mobilities and high breakdown fields is crucial for further progress in state of the art electronics. Epitaxial graphene grown on semi-insulating silicon carbide substrates has a high potential to be integrated in current planar device technologies. High electron mobilities and sheet carrier densities make graphene extremely attractive for high frequency analog applications. One of the remaining challenges is the interaction of epitaxial graphene with the substrate. Typically, much lower free charge carrier mobilities, compared to free standing graphene, and doping, due to charge transfer from the substrate, is reported. Thus, a good understanding of the intrinsic free charge carriers properties and the factors affecting them is very important for further development of epitaxial graphene. Group III-nitrides have been extensively studied and already have proven their high efficiency as light emitting diodes for short wavelengths. High carrier mobilities and breakdown electric fields were demonstrated for group III-nitrides, making them attractive for high frequency and high power applications. Currently, In-rich InGaN alloys and AlGaN/GaN high electron mobility structures are of high interest for the research community due to open fundamental questions such as free charge carrier properties at high temperatures and wavefunction hybridization in AlGaN/GaN heterostructures. Electrical characterization techniques, commonly used for the determination of free charge carrier properties, require good ohmic and Schottky contacts, which in certain cases can be difficult to achieve. Access to electrical properties of buried conductive channels in multilayered structures requires modification of samples and good knowledge of the electrical properties of all electrical junctions within the structure. Moreover, the use of contacts to electrically characterize two-dimensional electronic materials, such as graphene, can alter their intrinsic properties. Furthermore, the determination of effective mass parameters commonly employs cyclotron resonance and Shubnikov-de Haas oscillations measurements, which require long scattering times of free charge carriers, high magnetic fields and low temperatures. The optical Hall effect is an external magnetic-field induced birefringence of conductive layers due to the free charge carriers interaction with long-wavelength electromagnetic waves under the influence of the Lorentz force. The optical Hall effect can be measured by generalized ellipsometry and provides a powerful method for the determination of free charge carrier properties in a non-destructive and contactless manner. The optical Hall effect measurements can provide quantitative information about free charge carrier type, concentration, mobility and effective mass parameters at temperatures ranging from few kelvins to room temperature and above. It further allows to differentiate the free charge carrier properties of individual layers in multilayer samples. The employment of a backside cavity for transparent samples can enhance the optical Hall effect and allows to access free charge carrier properties at relatively low magnetic fields using permanent magnet. The optical Hall effect measurements at mid-infrared spectral range can be used to probe quantum mechanical phenomena such as Landau levels in graphene. The magnetic field dependence of the inter-Landau level transition energies and optical polarization selection rules provide information about coupling properties between graphene layers and the electronic band structure. Measurement of the optical Hall effect by generalized ellipsometry is an indirect technique requiring subsequent data analysis. Parameterized optical models are fitted to match experimentally measured ellipsometric spectra by varying physically significant model parameters. Analysis of the generalized ellipsometry data at long wavelengths for samples containing free charge carriers by optical models based on the classical Drude formulation, augmented with an external magnetic field contribution, allows to extract carrier concentration, mobility and effective mass parameters. The development of the integrated FIR and THz frequency-domain ellipsometer at the Terahertz Materials Analysis Center in Linköping University was part of the graduate studies presented in this dissertation. The THz ellipsometer capabilities are demonstrated by determination of Si and sapphire optical constants, and free charge carrier properties of two-dimensional electron gas in GaN-based high electron mobility transistor structures. The THz ellipsometry is further shown to be capable of determining free charge carrier properties and following their changes upon variation of ambient conditions in atomically thin layers with an example of epitaxial graphene. A potential of the THz OHE with the cavity enhancement (THz-CE-OHE) for determination of the free charge carrier properties in atomically thin layers were demonstrated by the measurements of the carrier properties in monolayer and multilayer epitaxial graphene on Si-face 4H-SiC. The data analysis revealed p-type doping for monolayer graphene with a carrier density in the low 1012 cm-2 range and a carrier mobility of 1550 cm2V-1s-1. For the multilayer graphene, n-type doping with a carrier density in the low 1013 cm-2 range, a mobility of 470 cm2V-1s-1 and an effective mass of (0.14 ± 0.03)m0 were extracted. Different type of doping among monolayer and multilayer graphene is explained as a result of different hydrophobicity among samples. Further, we have employed THz-CE-OHE to determine for the first time anisotropic mobility parameter in quasi-free-standing bilayer epitaxial graphene induced by step-like surface morphology of 4H-SiC. Correlation of atomic force microscopy, Raman scattering spectroscopy, scanning probe Kelvin probe microscopy, low energy electron microscopy and diffraction analysis allows us to investigate the possible scattering mechanisms and suggests that anisotropic mobility is induced by varying local mobility parameter due to interaction between graphene and underlaying substrate. The origin of the layers decoupling in multilayer graphene on C-face 4H-SiC was studied by MIR-OHE, transmission electron microscopy and electron energy loss spectroscopy. The results revealed the decoupling of the layers induced by the increased interlayer spacing which is attributed to the Si atoms trapped between graphene layers. MIR ellipsometry and MIR-OHE measurements were employed to determine the electron effective mass in a wurtzite In0.33Ga0.67N epitaxial layer. The data analysis revealed the effective mass parameters parallel and perpendicular to the c-axis which can be considered as equal within sensitivity of our measurements. The determined effective mass is consistent with linear dependence on the In content. Analysis of the free charge carrier properties in AlGaN/GaN high electron mobility structures with modified interfaces showed that AlGaN/GaN interface structure has a significant effect on the mobility parameter. A sample with a sharp interface layers exhibits a record mobility of 2332 ± 73 cm2V-1s-1. The determined effective mass parameters showed an increase compared to the bulk GaN value, which is attributed to the penetration of the electron wavefunction into the AlGaN barrier layer. Temperature dependence of free charge carrier properties in GaN-based high electron mobility transistor structures with AlGaN and InAlN barrier layers were measured by terahertz optical Hall effect technique in a temperature range from 7.2 K to 398 K. The results revealed strong changes in the effective mass and mobility parameters. At temperatures below 57 K very high carrier mobility parameters above 20000 cm2V-1s-1 for AlGaN-barrier sample and much lower mobilities of ~ 5000 cm2V-1s-1 for InAlN-barrier sample were obtained. At low temperatures the effective mass parameters for both samples are very similar to bulk GaN value, while at temperatures above 131 K effective mass shows a strong increase with temperature. The effective masses of 0.344 m0 (@370 K) and 0.439 m0 (@398 K) were obtained for AlGaN- and InAlN-barrier samples, respectively. We discussed the possible origins of effective mass enhancement in high electron mobility transistor structures.
Free charge carrier properties in group III nitrides and graphene studied by THz-to-MIR ellipsometry and optical Hall effect
Author: Nerijus Armakavicius
Publisher: Linköping University Electronic Press
ISBN: 917685132X
Category :
Languages : en
Pages : 62
Book Description
Development of silicon based electronics have revolutionized our every day life during the last five decades. Nowadays silicon based devices operate close to their theoretical limits that is becoming a bottleneck for further progress. In particular, for the growing field of high frequency and high power electronics, silicon cannot offer the required properties. Development of materials capable of providing high current densities, carrier mobilities and high breakdown fields is crucial for further progress in state of the art electronics. Epitaxial graphene grown on semi-insulating silicon carbide substrates has a high potential to be integrated in current planar device technologies. High electron mobilities and sheet carrier densities make graphene extremely attractive for high frequency analog applications. One of the remaining challenges is the interaction of epitaxial graphene with the substrate. Typically, much lower free charge carrier mobilities, compared to free standing graphene, and doping, due to charge transfer from the substrate, is reported. Thus, a good understanding of the intrinsic free charge carriers properties and the factors affecting them is very important for further development of epitaxial graphene. Group III-nitrides have been extensively studied and already have proven their high efficiency as light emitting diodes for short wavelengths. High carrier mobilities and breakdown electric fields were demonstrated for group III-nitrides, making them attractive for high frequency and high power applications. Currently, In-rich InGaN alloys and AlGaN/GaN high electron mobility structures are of high interest for the research community due to open fundamental questions such as free charge carrier properties at high temperatures and wavefunction hybridization in AlGaN/GaN heterostructures. Electrical characterization techniques, commonly used for the determination of free charge carrier properties, require good ohmic and Schottky contacts, which in certain cases can be difficult to achieve. Access to electrical properties of buried conductive channels in multilayered structures requires modification of samples and good knowledge of the electrical properties of all electrical junctions within the structure. Moreover, the use of contacts to electrically characterize two-dimensional electronic materials, such as graphene, can alter their intrinsic properties. Furthermore, the determination of effective mass parameters commonly employs cyclotron resonance and Shubnikov-de Haas oscillations measurements, which require long scattering times of free charge carriers, high magnetic fields and low temperatures. The optical Hall effect is an external magnetic-field induced birefringence of conductive layers due to the free charge carriers interaction with long-wavelength electromagnetic waves under the influence of the Lorentz force. The optical Hall effect can be measured by generalized ellipsometry and provides a powerful method for the determination of free charge carrier properties in a non-destructive and contactless manner. The optical Hall effect measurements can provide quantitative information about free charge carrier type, concentration, mobility and effective mass parameters at temperatures ranging from few kelvins to room temperature and above. It further allows to differentiate the free charge carrier properties of individual layers in multilayer samples. The employment of a backside cavity for transparent samples can enhance the optical Hall effect and allows to access free charge carrier properties at relatively low magnetic fields using permanent magnet. The optical Hall effect measurements at mid-infrared spectral range can be used to probe quantum mechanical phenomena such as Landau levels in graphene. The magnetic field dependence of the inter-Landau level transition energies and optical polarization selection rules provide information about coupling properties between graphene layers and the electronic band structure. Measurement of the optical Hall effect by generalized ellipsometry is an indirect technique requiring subsequent data analysis. Parameterized optical models are fitted to match experimentally measured ellipsometric spectra by varying physically significant model parameters. Analysis of the generalized ellipsometry data at long wavelengths for samples containing free charge carriers by optical models based on the classical Drude formulation, augmented with an external magnetic field contribution, allows to extract carrier concentration, mobility and effective mass parameters. The development of the integrated FIR and THz frequency-domain ellipsometer at the Terahertz Materials Analysis Center in Linköping University was part of the graduate studies presented in this dissertation. The THz ellipsometer capabilities are demonstrated by determination of Si and sapphire optical constants, and free charge carrier properties of two-dimensional electron gas in GaN-based high electron mobility transistor structures. The THz ellipsometry is further shown to be capable of determining free charge carrier properties and following their changes upon variation of ambient conditions in atomically thin layers with an example of epitaxial graphene. A potential of the THz OHE with the cavity enhancement (THz-CE-OHE) for determination of the free charge carrier properties in atomically thin layers were demonstrated by the measurements of the carrier properties in monolayer and multilayer epitaxial graphene on Si-face 4H-SiC. The data analysis revealed p-type doping for monolayer graphene with a carrier density in the low 1012 cm-2 range and a carrier mobility of 1550 cm2V-1s-1. For the multilayer graphene, n-type doping with a carrier density in the low 1013 cm-2 range, a mobility of 470 cm2V-1s-1 and an effective mass of (0.14 ± 0.03)m0 were extracted. Different type of doping among monolayer and multilayer graphene is explained as a result of different hydrophobicity among samples. Further, we have employed THz-CE-OHE to determine for the first time anisotropic mobility parameter in quasi-free-standing bilayer epitaxial graphene induced by step-like surface morphology of 4H-SiC. Correlation of atomic force microscopy, Raman scattering spectroscopy, scanning probe Kelvin probe microscopy, low energy electron microscopy and diffraction analysis allows us to investigate the possible scattering mechanisms and suggests that anisotropic mobility is induced by varying local mobility parameter due to interaction between graphene and underlaying substrate. The origin of the layers decoupling in multilayer graphene on C-face 4H-SiC was studied by MIR-OHE, transmission electron microscopy and electron energy loss spectroscopy. The results revealed the decoupling of the layers induced by the increased interlayer spacing which is attributed to the Si atoms trapped between graphene layers. MIR ellipsometry and MIR-OHE measurements were employed to determine the electron effective mass in a wurtzite In0.33Ga0.67N epitaxial layer. The data analysis revealed the effective mass parameters parallel and perpendicular to the c-axis which can be considered as equal within sensitivity of our measurements. The determined effective mass is consistent with linear dependence on the In content. Analysis of the free charge carrier properties in AlGaN/GaN high electron mobility structures with modified interfaces showed that AlGaN/GaN interface structure has a significant effect on the mobility parameter. A sample with a sharp interface layers exhibits a record mobility of 2332 ± 73 cm2V-1s-1. The determined effective mass parameters showed an increase compared to the bulk GaN value, which is attributed to the penetration of the electron wavefunction into the AlGaN barrier layer. Temperature dependence of free charge carrier properties in GaN-based high electron mobility transistor structures with AlGaN and InAlN barrier layers were measured by terahertz optical Hall effect technique in a temperature range from 7.2 K to 398 K. The results revealed strong changes in the effective mass and mobility parameters. At temperatures below 57 K very high carrier mobility parameters above 20000 cm2V-1s-1 for AlGaN-barrier sample and much lower mobilities of ~ 5000 cm2V-1s-1 for InAlN-barrier sample were obtained. At low temperatures the effective mass parameters for both samples are very similar to bulk GaN value, while at temperatures above 131 K effective mass shows a strong increase with temperature. The effective masses of 0.344 m0 (@370 K) and 0.439 m0 (@398 K) were obtained for AlGaN- and InAlN-barrier samples, respectively. We discussed the possible origins of effective mass enhancement in high electron mobility transistor structures.
Publisher: Linköping University Electronic Press
ISBN: 917685132X
Category :
Languages : en
Pages : 62
Book Description
Development of silicon based electronics have revolutionized our every day life during the last five decades. Nowadays silicon based devices operate close to their theoretical limits that is becoming a bottleneck for further progress. In particular, for the growing field of high frequency and high power electronics, silicon cannot offer the required properties. Development of materials capable of providing high current densities, carrier mobilities and high breakdown fields is crucial for further progress in state of the art electronics. Epitaxial graphene grown on semi-insulating silicon carbide substrates has a high potential to be integrated in current planar device technologies. High electron mobilities and sheet carrier densities make graphene extremely attractive for high frequency analog applications. One of the remaining challenges is the interaction of epitaxial graphene with the substrate. Typically, much lower free charge carrier mobilities, compared to free standing graphene, and doping, due to charge transfer from the substrate, is reported. Thus, a good understanding of the intrinsic free charge carriers properties and the factors affecting them is very important for further development of epitaxial graphene. Group III-nitrides have been extensively studied and already have proven their high efficiency as light emitting diodes for short wavelengths. High carrier mobilities and breakdown electric fields were demonstrated for group III-nitrides, making them attractive for high frequency and high power applications. Currently, In-rich InGaN alloys and AlGaN/GaN high electron mobility structures are of high interest for the research community due to open fundamental questions such as free charge carrier properties at high temperatures and wavefunction hybridization in AlGaN/GaN heterostructures. Electrical characterization techniques, commonly used for the determination of free charge carrier properties, require good ohmic and Schottky contacts, which in certain cases can be difficult to achieve. Access to electrical properties of buried conductive channels in multilayered structures requires modification of samples and good knowledge of the electrical properties of all electrical junctions within the structure. Moreover, the use of contacts to electrically characterize two-dimensional electronic materials, such as graphene, can alter their intrinsic properties. Furthermore, the determination of effective mass parameters commonly employs cyclotron resonance and Shubnikov-de Haas oscillations measurements, which require long scattering times of free charge carriers, high magnetic fields and low temperatures. The optical Hall effect is an external magnetic-field induced birefringence of conductive layers due to the free charge carriers interaction with long-wavelength electromagnetic waves under the influence of the Lorentz force. The optical Hall effect can be measured by generalized ellipsometry and provides a powerful method for the determination of free charge carrier properties in a non-destructive and contactless manner. The optical Hall effect measurements can provide quantitative information about free charge carrier type, concentration, mobility and effective mass parameters at temperatures ranging from few kelvins to room temperature and above. It further allows to differentiate the free charge carrier properties of individual layers in multilayer samples. The employment of a backside cavity for transparent samples can enhance the optical Hall effect and allows to access free charge carrier properties at relatively low magnetic fields using permanent magnet. The optical Hall effect measurements at mid-infrared spectral range can be used to probe quantum mechanical phenomena such as Landau levels in graphene. The magnetic field dependence of the inter-Landau level transition energies and optical polarization selection rules provide information about coupling properties between graphene layers and the electronic band structure. Measurement of the optical Hall effect by generalized ellipsometry is an indirect technique requiring subsequent data analysis. Parameterized optical models are fitted to match experimentally measured ellipsometric spectra by varying physically significant model parameters. Analysis of the generalized ellipsometry data at long wavelengths for samples containing free charge carriers by optical models based on the classical Drude formulation, augmented with an external magnetic field contribution, allows to extract carrier concentration, mobility and effective mass parameters. The development of the integrated FIR and THz frequency-domain ellipsometer at the Terahertz Materials Analysis Center in Linköping University was part of the graduate studies presented in this dissertation. The THz ellipsometer capabilities are demonstrated by determination of Si and sapphire optical constants, and free charge carrier properties of two-dimensional electron gas in GaN-based high electron mobility transistor structures. The THz ellipsometry is further shown to be capable of determining free charge carrier properties and following their changes upon variation of ambient conditions in atomically thin layers with an example of epitaxial graphene. A potential of the THz OHE with the cavity enhancement (THz-CE-OHE) for determination of the free charge carrier properties in atomically thin layers were demonstrated by the measurements of the carrier properties in monolayer and multilayer epitaxial graphene on Si-face 4H-SiC. The data analysis revealed p-type doping for monolayer graphene with a carrier density in the low 1012 cm-2 range and a carrier mobility of 1550 cm2V-1s-1. For the multilayer graphene, n-type doping with a carrier density in the low 1013 cm-2 range, a mobility of 470 cm2V-1s-1 and an effective mass of (0.14 ± 0.03)m0 were extracted. Different type of doping among monolayer and multilayer graphene is explained as a result of different hydrophobicity among samples. Further, we have employed THz-CE-OHE to determine for the first time anisotropic mobility parameter in quasi-free-standing bilayer epitaxial graphene induced by step-like surface morphology of 4H-SiC. Correlation of atomic force microscopy, Raman scattering spectroscopy, scanning probe Kelvin probe microscopy, low energy electron microscopy and diffraction analysis allows us to investigate the possible scattering mechanisms and suggests that anisotropic mobility is induced by varying local mobility parameter due to interaction between graphene and underlaying substrate. The origin of the layers decoupling in multilayer graphene on C-face 4H-SiC was studied by MIR-OHE, transmission electron microscopy and electron energy loss spectroscopy. The results revealed the decoupling of the layers induced by the increased interlayer spacing which is attributed to the Si atoms trapped between graphene layers. MIR ellipsometry and MIR-OHE measurements were employed to determine the electron effective mass in a wurtzite In0.33Ga0.67N epitaxial layer. The data analysis revealed the effective mass parameters parallel and perpendicular to the c-axis which can be considered as equal within sensitivity of our measurements. The determined effective mass is consistent with linear dependence on the In content. Analysis of the free charge carrier properties in AlGaN/GaN high electron mobility structures with modified interfaces showed that AlGaN/GaN interface structure has a significant effect on the mobility parameter. A sample with a sharp interface layers exhibits a record mobility of 2332 ± 73 cm2V-1s-1. The determined effective mass parameters showed an increase compared to the bulk GaN value, which is attributed to the penetration of the electron wavefunction into the AlGaN barrier layer. Temperature dependence of free charge carrier properties in GaN-based high electron mobility transistor structures with AlGaN and InAlN barrier layers were measured by terahertz optical Hall effect technique in a temperature range from 7.2 K to 398 K. The results revealed strong changes in the effective mass and mobility parameters. At temperatures below 57 K very high carrier mobility parameters above 20000 cm2V-1s-1 for AlGaN-barrier sample and much lower mobilities of ~ 5000 cm2V-1s-1 for InAlN-barrier sample were obtained. At low temperatures the effective mass parameters for both samples are very similar to bulk GaN value, while at temperatures above 131 K effective mass shows a strong increase with temperature. The effective masses of 0.344 m0 (@370 K) and 0.439 m0 (@398 K) were obtained for AlGaN- and InAlN-barrier samples, respectively. We discussed the possible origins of effective mass enhancement in high electron mobility transistor structures.
Frontiers of Graphene and Carbon Nanotubes
Author: Kazuhiko Matsumoto
Publisher: Springer
ISBN: 443155372X
Category : Technology & Engineering
Languages : en
Pages : 295
Book Description
This book focuses on carbon nanotubes and graphene as representatives of nano-carbon materials, and describes the growth of new technology and applications of new devices. As new devices and as new materials, nano-carbon materials are expected to be world pioneers that could not have been realized with conventional semiconductor materials, and as those that extend the limits of conventional semiconductor performance. This book introduces the latest achievements of nano-carbon devices, processes, and technology growth. It is anticipated that these studies will also be pioneers in the development of future research of nano-carbon devices and materials. This book consists of 18 chapters. Chapters 1 to 8 describe new device applications and new growth methods of graphene, and Chapters 9 to 18, those of carbon nanotubes. It is expected that by increasing the advantages and overcoming the weak points of nanocarbon materials, a new world that cannot be achieved with conventional materials will be greatly expanded. We strongly hope this book contributes to its development.
Publisher: Springer
ISBN: 443155372X
Category : Technology & Engineering
Languages : en
Pages : 295
Book Description
This book focuses on carbon nanotubes and graphene as representatives of nano-carbon materials, and describes the growth of new technology and applications of new devices. As new devices and as new materials, nano-carbon materials are expected to be world pioneers that could not have been realized with conventional semiconductor materials, and as those that extend the limits of conventional semiconductor performance. This book introduces the latest achievements of nano-carbon devices, processes, and technology growth. It is anticipated that these studies will also be pioneers in the development of future research of nano-carbon devices and materials. This book consists of 18 chapters. Chapters 1 to 8 describe new device applications and new growth methods of graphene, and Chapters 9 to 18, those of carbon nanotubes. It is expected that by increasing the advantages and overcoming the weak points of nanocarbon materials, a new world that cannot be achieved with conventional materials will be greatly expanded. We strongly hope this book contributes to its development.
The Physics of Semiconductors
Author: Marius Grundmann
Publisher: Springer Nature
ISBN: 3030515699
Category : Technology & Engineering
Languages : en
Pages : 905
Book Description
The 4th edition of this highly successful textbook features copious material for a complete upper-level undergraduate or graduate course, guiding readers to the point where they can choose a specialized topic and begin supervised research. The textbook provides an integrated approach beginning from the essential principles of solid-state and semiconductor physics to their use in various classic and modern semiconductor devices for applications in electronics and photonics. The text highlights many practical aspects of semiconductors: alloys, strain, heterostructures, nanostructures, amorphous semiconductors, and noise, which are essential aspects of modern semiconductor research but often omitted in other textbooks. This textbook also covers advanced topics, such as Bragg mirrors, resonators, polarized and magnetic semiconductors, nanowires, quantum dots, multi-junction solar cells, thin film transistors, and transparent conductive oxides. The 4th edition includes many updates and chapters on 2D materials and aspects of topology. The text derives explicit formulas for many results to facilitate a better understanding of the topics. Having evolved from a highly regarded two-semester course on the topic, The Physics of Semiconductors requires little or no prior knowledge of solid-state physics. More than 2100 references guide the reader to historic and current literature including original papers, review articles and topical books, providing a go-to point of reference for experienced researchers as well.
Publisher: Springer Nature
ISBN: 3030515699
Category : Technology & Engineering
Languages : en
Pages : 905
Book Description
The 4th edition of this highly successful textbook features copious material for a complete upper-level undergraduate or graduate course, guiding readers to the point where they can choose a specialized topic and begin supervised research. The textbook provides an integrated approach beginning from the essential principles of solid-state and semiconductor physics to their use in various classic and modern semiconductor devices for applications in electronics and photonics. The text highlights many practical aspects of semiconductors: alloys, strain, heterostructures, nanostructures, amorphous semiconductors, and noise, which are essential aspects of modern semiconductor research but often omitted in other textbooks. This textbook also covers advanced topics, such as Bragg mirrors, resonators, polarized and magnetic semiconductors, nanowires, quantum dots, multi-junction solar cells, thin film transistors, and transparent conductive oxides. The 4th edition includes many updates and chapters on 2D materials and aspects of topology. The text derives explicit formulas for many results to facilitate a better understanding of the topics. Having evolved from a highly regarded two-semester course on the topic, The Physics of Semiconductors requires little or no prior knowledge of solid-state physics. More than 2100 references guide the reader to historic and current literature including original papers, review articles and topical books, providing a go-to point of reference for experienced researchers as well.
2D Monoelemental Materials (Xenes) and Related Technologies
Author: Zongyu Huang
Publisher: CRC Press
ISBN: 1000562840
Category : Science
Languages : en
Pages : 166
Book Description
Monoelemental 2D materials called Xenes have a graphene-like structure, intra-layer covalent bond, and weak van der Waals forces between layers. Materials composed of different groups of elements have different structures and rich properties, making Xenes materials a potential candidate for the next generation of 2D materials. 2D Monoelemental Materials (Xenes) and Related Technologies: Beyond Graphene describes the structure, properties, and applications of Xenes by classification and section. The first section covers the structure and classification of single-element 2D materials, according to the different main groups of monoelemental materials of different components and includes the properties and applications with detailed description. The second section discusses the structure, properties, and applications of advanced 2D Xenes materials, which are composed of heterogeneous structures, produced by defects, and regulated by the field. Features include: Systematically detailed single element materials according to the main groups of the constituent elements Classification of the most effective and widely studied 2D Xenes materials Expounding upon changes in properties and improvements in applications by different regulation mechanisms Discussion of the significance of 2D single-element materials where structural characteristics are closely combined with different preparation methods and the relevant theoretical properties complement each other with practical applications Aimed at researchers and advanced students in materials science and engineering, this book offers a broad view of current knowledge in the emerging and promising field of 2D monoelemental materials.
Publisher: CRC Press
ISBN: 1000562840
Category : Science
Languages : en
Pages : 166
Book Description
Monoelemental 2D materials called Xenes have a graphene-like structure, intra-layer covalent bond, and weak van der Waals forces between layers. Materials composed of different groups of elements have different structures and rich properties, making Xenes materials a potential candidate for the next generation of 2D materials. 2D Monoelemental Materials (Xenes) and Related Technologies: Beyond Graphene describes the structure, properties, and applications of Xenes by classification and section. The first section covers the structure and classification of single-element 2D materials, according to the different main groups of monoelemental materials of different components and includes the properties and applications with detailed description. The second section discusses the structure, properties, and applications of advanced 2D Xenes materials, which are composed of heterogeneous structures, produced by defects, and regulated by the field. Features include: Systematically detailed single element materials according to the main groups of the constituent elements Classification of the most effective and widely studied 2D Xenes materials Expounding upon changes in properties and improvements in applications by different regulation mechanisms Discussion of the significance of 2D single-element materials where structural characteristics are closely combined with different preparation methods and the relevant theoretical properties complement each other with practical applications Aimed at researchers and advanced students in materials science and engineering, this book offers a broad view of current knowledge in the emerging and promising field of 2D monoelemental materials.
Compound Semiconductor Photonics
Author: Chua Soo-Jin
Publisher: CRC Press
ISBN: 9814310441
Category : Science
Languages : en
Pages : 242
Book Description
This proceeding is a collection of selected papers presented at Symposium O of Compound Semiconductor Photonics in the International Conference on Materials for Advanced Technology (ICMAT), which was held in Singapore from 28 June to 3 July 2009. The symposium covers a wide range of topics from fundamental semiconductor materials study to photonic device fabrication and application. The papers collected are of recent progress in the active and wide range of semiconductor photonics research. They include materials-related papers on III-As/P, III-nitride, quantum dot/wire/dash growth, ZnO, and chalcogenide, and devices-related papers on photonic crystals, VCSEL, quantum dot/dash lasers, LEDs, waveguides, solar cells and heterogeneous integrat
Publisher: CRC Press
ISBN: 9814310441
Category : Science
Languages : en
Pages : 242
Book Description
This proceeding is a collection of selected papers presented at Symposium O of Compound Semiconductor Photonics in the International Conference on Materials for Advanced Technology (ICMAT), which was held in Singapore from 28 June to 3 July 2009. The symposium covers a wide range of topics from fundamental semiconductor materials study to photonic device fabrication and application. The papers collected are of recent progress in the active and wide range of semiconductor photonics research. They include materials-related papers on III-As/P, III-nitride, quantum dot/wire/dash growth, ZnO, and chalcogenide, and devices-related papers on photonic crystals, VCSEL, quantum dot/dash lasers, LEDs, waveguides, solar cells and heterogeneous integrat
Semiconductor Optoelectronic Devices
Author: Joachim Piprek
Publisher: Elsevier
ISBN: 0080469787
Category : Technology & Engineering
Languages : en
Pages : 296
Book Description
Optoelectronics has become an important part of our lives. Wherever light is used to transmit information, tiny semiconductor devices are needed to transfer electrical current into optical signals and vice versa. Examples include light emitting diodes in radios and other appliances, photodetectors in elevator doors and digital cameras, and laser diodes that transmit phone calls through glass fibers. Such optoelectronic devices take advantage of sophisticated interactions between electrons and light. Nanometer scale semiconductor structures are often at the heart of modern optoelectronic devices. Their shrinking size and increasing complexity make computer simulation an important tool to design better devices that meet ever rising perfomance requirements. The current need to apply advanced design software in optoelectronics follows the trend observed in the 1980's with simulation software for silicon devices. Today, software for technology computer-aided design (TCAD) and electronic design automation (EDA) represents a fundamental part of the silicon industry. In optoelectronics, advanced commercial device software has emerged recently and it is expected to play an increasingly important role in the near future. This book will enable students, device engineers, and researchers to more effectively use advanced design software in optoelectronics. - Provides fundamental knowledge in semiconductor physics and in electromagnetics, while helping to understand and use advanced device simulation software - Demonstrates the combination of measurements and simulations in order to obtain realistic results and provides data on all required material parameters - Gives deep insight into the physics of state-of-the-art devices and helps to design and analyze of modern optoelectronic devices
Publisher: Elsevier
ISBN: 0080469787
Category : Technology & Engineering
Languages : en
Pages : 296
Book Description
Optoelectronics has become an important part of our lives. Wherever light is used to transmit information, tiny semiconductor devices are needed to transfer electrical current into optical signals and vice versa. Examples include light emitting diodes in radios and other appliances, photodetectors in elevator doors and digital cameras, and laser diodes that transmit phone calls through glass fibers. Such optoelectronic devices take advantage of sophisticated interactions between electrons and light. Nanometer scale semiconductor structures are often at the heart of modern optoelectronic devices. Their shrinking size and increasing complexity make computer simulation an important tool to design better devices that meet ever rising perfomance requirements. The current need to apply advanced design software in optoelectronics follows the trend observed in the 1980's with simulation software for silicon devices. Today, software for technology computer-aided design (TCAD) and electronic design automation (EDA) represents a fundamental part of the silicon industry. In optoelectronics, advanced commercial device software has emerged recently and it is expected to play an increasingly important role in the near future. This book will enable students, device engineers, and researchers to more effectively use advanced design software in optoelectronics. - Provides fundamental knowledge in semiconductor physics and in electromagnetics, while helping to understand and use advanced device simulation software - Demonstrates the combination of measurements and simulations in order to obtain realistic results and provides data on all required material parameters - Gives deep insight into the physics of state-of-the-art devices and helps to design and analyze of modern optoelectronic devices
Infrared Ellipsometry on Semiconductor Layer Structures
Author: Mathias Schubert
Publisher: Springer Science & Business Media
ISBN: 9783540232490
Category : Science
Languages : en
Pages : 216
Book Description
The study of semiconductor-layer structures using infrared ellipsometry is a rapidly growing field within optical spectroscopy. This book offers basic insights into the concepts of phonons, plasmons and polaritons, and the infrared dielectric function of semiconductors in layered structures. It describes how strain, composition, and the state of the atomic order within complex layer structures of multinary alloys can be determined from an infrared ellipsometry examination. Special emphasis is given to free-charge-carrier properties, and magneto-optical effects. A broad range of experimental examples are described, including multinary alloys of zincblende and wurtzite structure semiconductor materials, and future applications such as organic layer structures and highly correlated electron systems are proposed.
Publisher: Springer Science & Business Media
ISBN: 9783540232490
Category : Science
Languages : en
Pages : 216
Book Description
The study of semiconductor-layer structures using infrared ellipsometry is a rapidly growing field within optical spectroscopy. This book offers basic insights into the concepts of phonons, plasmons and polaritons, and the infrared dielectric function of semiconductors in layered structures. It describes how strain, composition, and the state of the atomic order within complex layer structures of multinary alloys can be determined from an infrared ellipsometry examination. Special emphasis is given to free-charge-carrier properties, and magneto-optical effects. A broad range of experimental examples are described, including multinary alloys of zincblende and wurtzite structure semiconductor materials, and future applications such as organic layer structures and highly correlated electron systems are proposed.
X-Ray Metrology in Semiconductor Manufacturing
Author: D. Keith Bowen
Publisher: CRC Press
ISBN: 1420005650
Category : Technology & Engineering
Languages : en
Pages : 297
Book Description
The scales involved in modern semiconductor manufacturing and microelectronics continue to plunge downward. Effective and accurate characterization of materials with thicknesses below a few nanometers can be achieved using x-rays. While many books are available on the theory behind x-ray metrology (XRM), X-Ray Metrology in Semiconductor Manufacturing is the first book to focus on the practical aspects of the technology and its application in device fabrication and solving new materials problems. Following a general overview of the field, the first section of the book is organized by application and outlines the techniques that are best suited to each. The next section delves into the techniques and theory behind the applications, such as specular x-ray reflectivity, diffraction imaging, and defect mapping. Finally, the third section provides technological details of each technique, answering questions commonly encountered in practice. The authors supply real examples from the semiconductor and magnetic recording industries as well as more than 150 clearly drawn figures to illustrate the discussion. They also summarize the principles and key information about each method with inset boxes found throughout the text. Written by world leaders in the field, X-Ray Metrology in Semiconductor Manufacturing provides real solutions with a focus on accuracy, repeatability, and throughput.
Publisher: CRC Press
ISBN: 1420005650
Category : Technology & Engineering
Languages : en
Pages : 297
Book Description
The scales involved in modern semiconductor manufacturing and microelectronics continue to plunge downward. Effective and accurate characterization of materials with thicknesses below a few nanometers can be achieved using x-rays. While many books are available on the theory behind x-ray metrology (XRM), X-Ray Metrology in Semiconductor Manufacturing is the first book to focus on the practical aspects of the technology and its application in device fabrication and solving new materials problems. Following a general overview of the field, the first section of the book is organized by application and outlines the techniques that are best suited to each. The next section delves into the techniques and theory behind the applications, such as specular x-ray reflectivity, diffraction imaging, and defect mapping. Finally, the third section provides technological details of each technique, answering questions commonly encountered in practice. The authors supply real examples from the semiconductor and magnetic recording industries as well as more than 150 clearly drawn figures to illustrate the discussion. They also summarize the principles and key information about each method with inset boxes found throughout the text. Written by world leaders in the field, X-Ray Metrology in Semiconductor Manufacturing provides real solutions with a focus on accuracy, repeatability, and throughput.
Nanoscale Thermoelectrics
Author: Xiaodong Wang
Publisher: Springer Science & Business Media
ISBN: 3319020129
Category : Technology & Engineering
Languages : en
Pages : 520
Book Description
For the efficient utilization of energy resources and the minimization of environmental damage, thermoelectric materials can play an important role by converting waste heat into electricity directly. Nanostructured thermoelectric materials have received much attention recently due to the potential for enhanced properties associated with size effects and quantum confinement. Nanoscale Thermoelectrics describes the theory underlying these phenomena, as well as various thermoelectric materials and nanostructures such as carbon nanotubes, SiGe nanowires, and graphene nanoribbons. Chapters written by leading scientists throughout the world are intended to create a fundamental bridge between thermoelectrics and nanotechnology, and to stimulate readers' interest in developing new types of thermoelectric materials and devices for power generation and other applications. Nanoscale Thermoelectrics is both a comprehensive introduction to the field and a guide to further research, and can be recommended for Physics, Electrical Engineering, and Materials Science departments.
Publisher: Springer Science & Business Media
ISBN: 3319020129
Category : Technology & Engineering
Languages : en
Pages : 520
Book Description
For the efficient utilization of energy resources and the minimization of environmental damage, thermoelectric materials can play an important role by converting waste heat into electricity directly. Nanostructured thermoelectric materials have received much attention recently due to the potential for enhanced properties associated with size effects and quantum confinement. Nanoscale Thermoelectrics describes the theory underlying these phenomena, as well as various thermoelectric materials and nanostructures such as carbon nanotubes, SiGe nanowires, and graphene nanoribbons. Chapters written by leading scientists throughout the world are intended to create a fundamental bridge between thermoelectrics and nanotechnology, and to stimulate readers' interest in developing new types of thermoelectric materials and devices for power generation and other applications. Nanoscale Thermoelectrics is both a comprehensive introduction to the field and a guide to further research, and can be recommended for Physics, Electrical Engineering, and Materials Science departments.
Transparent Electronics
Author: John F. Wager
Publisher: Springer Science & Business Media
ISBN: 0387723420
Category : Technology & Engineering
Languages : en
Pages : 217
Book Description
This monograph is the first roadmap for transparent electronics. It defines and assesses what and where the field is, where it is going, and what needs to happen to get it there. Although the central focus of this monograph involves transparent electronics, many of the materials, devices, circuits, and process integration strategies discussed will be of great interest to researchers working in other emerging fields, including printed electronics, large-area electronics, low-cost electronics, and disposable electronics.
Publisher: Springer Science & Business Media
ISBN: 0387723420
Category : Technology & Engineering
Languages : en
Pages : 217
Book Description
This monograph is the first roadmap for transparent electronics. It defines and assesses what and where the field is, where it is going, and what needs to happen to get it there. Although the central focus of this monograph involves transparent electronics, many of the materials, devices, circuits, and process integration strategies discussed will be of great interest to researchers working in other emerging fields, including printed electronics, large-area electronics, low-cost electronics, and disposable electronics.