Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
ISBN: 9782883940727
Category : Technology & Engineering
Languages : en
Pages : 168
Get Book Here
Book Description
The intention of fib Bulletin 32 is to present guidelines for the design of footbridges as well as bridges accommodating cyclists and bridleways (equestrian paths). The need for these guidelines comes from the fact that structural engineers designing footbridges currently have to spend considerable time and energy collecting information from numerous documents, codes and recommendations to make design decisions. There seems to be no international document dedicated solely to the design of footbridges. These guidelines attempt to provide a concentrated source of information regarding all design issues specific to footbridges. It is meant to be a 'liberal' document in the sense that it promotes new, innovative and bold yet prudent designs by sharing the experience of the authors, summarizing specifications given in codes, and presenting a collection of examples of well-designed structures or structural details from around the world. It is not intended to be an international code that specifies limits and admissible values, thus encouraging timid, conservative designs that are repetitions of approved and tested designs. Indeed, it may be the very fact that no international code exists specifically for footbridges that encourages the wide variety of footbridge designs found today. It should be noted that numerous guidelines, codes and books have been published on bridge design in general. Information given in those publications that is also applicable to footbridges is not repeated in Bulletin 32. The chapters of these guidelines all follow the same pattern: an introduction to the subject, general guidelines as well as do's and don'ts; a summary of information found in existing international codes, recommendations, experience of the authors, and built examples with comparison and comments on this information; examples. Plenty of illustrations and photographs help to visualize the themes of this work. The last chapter, 'Case Studies', contains footbridges each with a short summary of main structural data and references for further reading.
Author: Ursula Baus
Publisher: Springer Science & Business Media
ISBN: 3764381396
Category : Architecture
Languages : en
Pages : 255
Get Book Here
Book Description
Bridges have become a focus of increased attention and awareness in the last ten years as highly visible elements that define the urban and nonurban landscape. This book contains detailed presentations of some sixty-five bridges from ten European countries, with text, comprehensive and detail plans, and photographs taken especially for the volume.
Author: Peter Jeswald
Publisher: Storey Publishing
ISBN: 1580174876
Category : Gardening
Languages : en
Pages : 249
Get Book Here
Book Description
Making the outdoors more inviting becomes easy in a guide to constructing practical and beautiful elements on any property, with hundreds of instructional drawings of plans and techniques, and advice on every step of the building process, from choosing a site to finalizing a design. Simultaneous.
Author: Elsa Caetano
Publisher: CRC Press
ISBN: 1482266512
Category : Technology & Engineering
Languages : en
Pages : 203
Get Book Here
Book Description
Footbridge Vibration Design presents new approaches, numerical tools and experimental tools for assessing and controlling pedestrian effects. Moreover, it includes a number of reference cases dealing with design and control. Focussed on the translation of these findings into practical recommendations, guidelines, codes and design tools for the desi
Author: Matt Allen
Publisher: Springer
ISBN: 3319297635
Category : Technology & Engineering
Languages : en
Pages : 515
Get Book Here
Book Description
Dynamics of Coupled Structures, Volume 4. Proceedings of the 34th IMAC, A Conference and Exposition on Dynamics of Multiphysical Systems: From Active Materials to Vibroacoustics, 2016, the fourth volume of ten from the Conference brings together contributions to this important area of research and engineering. Th e collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: • Experimental Dynamic Substructuring • Structural Coupling of Nonlinear Structures • Analytical/Numerical Modeling of Joints • Industrial Applications of Substructuring • Source Identifi cation & Transfer Path Analysis • Human Induced Vibrations • Damping & Friction
Author: Paulo J. Cruz
Publisher: CRC Press
ISBN: 1317549961
Category : Technology & Engineering
Languages : en
Pages : 1553
Get Book Here
Book Description
Although the disciplines of architecture and structural engineering have both experienced their own historical development, their interaction has resulted in many fascinating and delightful structures. To take this interaction to a higher level, there is a need to stimulate the inventive and creative design of architectural structures and to persuade architects and structural engineers to further collaborate in this process, exploiting together new concepts, applications and challenges. This set of book of abstracts and full paper searchable CD-ROM presents selected papers presented at the 3rd International Conference on Structures and Architecture Conference (ICSA2016), organized by the School of Architecture of the University of Minho, Guimarães, Portugal (July 2016), to promote the synergy in the collaboration between the disciplines of architecture and structural engineering.
Author: Nigel Powers
Publisher: CRC Press
ISBN: 1351745964
Category : Technology & Engineering
Languages : en
Pages : 5447
Get Book Here
Book Description
Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.
Author: Alvaro Cunha
Publisher: Springer Science & Business Media
ISBN: 1461465192
Category : Technology & Engineering
Languages : en
Pages : 146
Get Book Here
Book Description
Topics in Dynamics of Bridges, Volume 3: Proceedings of the 31st IMAC, A Conference and Exposition on Structural Dynamics, 2013, the third volume of seven from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Vibration Monitoring Damping Damage Detection Health Monitoring Dynamic Behavior Dynamic Modeling Human-Induced Vibration
Author: Jerzy Warminski
Publisher: Springer Science & Business Media
ISBN: 940072473X
Category : Technology & Engineering
Languages : en
Pages : 286
Get Book Here
Book Description
Nonlinear phenomena should play a crucial role in the design and control of engineering systems and structures as they can drastically change the prevailing dynamical responses. This book covers theoretical and applications-based problems of nonlinear dynamics concerned with both discrete and continuous systems of interest in civil and mechanical engineering. They include pendulum-like systems, slender footbridges, shape memory alloys, sagged elastic cables and non-smooth problems. Pendulums can be used as a dynamic absorber mounted in high buildings, bridges or chimneys. Geometrical nonlinearities introduced by pendulum motion may change the system dynamics, and entail a rapid increase of the oscillations of both the structure and the pendulum, leading to full pendulum rotation or chaotic dynamics. To magnetorheological damping is proposed. Nonlinear mechanics has to be used to explain undesired response in slender footbridges, such as that occurred in the famous event of the London Millenium Bridge. The observed phenomena can be explained by an analytical nonlinear discrete-time model. Shape memory alloys (SMAs) exhibit very interesting nonlinear thermo-mechanical properties such as shape memory effect and superelasticity. SMA elements integrated within composite beams or plates can be used for active modification of structure properties e.g. by affecting their natural frequencies. Finite amplitude, resonant, forced dynamics of sagged, horizontal or inclined, elastic cables have recently undergone meaningful research advances concerned with modelling, analysis, response, and nonlinear/nonregular phenomena. A variety of features of nonlinear multimodal interaction in different resonance conditions are comparatively addressed. Non-smooth systems are very common in engineering practice. Three mechanical engineering problems are presented: (i) a vibro-impact system in the form of a moling device, (ii) the influence of the opening and closing of a fatigue crack on the host system dynamics, and (iii) nonlinear interactions between a rotor and snubber ring system. This book is aimed at a wide audience of engineers and researchers working in the field of nonlinear structural vibrations and dynamics, and undergraduate and postgraduate students reading mechanical, aerospace and civil engineering.
Author: Alphose Zingoni
Publisher: CRC Press
ISBN: 0429761171
Category : Technology & Engineering
Languages : en
Pages : 2435
Get Book Here
Book Description
Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
