Experimental Investigation of in Situ Upgrading of Heavy Oil by Using a Hydrogen Donor and Catalyst During Steam Injection PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Experimental Investigation of in Situ Upgrading of Heavy Oil by Using a Hydrogen Donor and Catalyst During Steam Injection PDF full book. Access full book title Experimental Investigation of in Situ Upgrading of Heavy Oil by Using a Hydrogen Donor and Catalyst During Steam Injection by Ahmad A. A Mohammad. Download full books in PDF and EPUB format.
Author: Ahmad A. A Mohammad
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Experiments were conducted to investigate the feasibility of in situ upgrading of heavy oil by the use of an orgametallic catalyst and a hydrogen donor (tetralin). The experiments used a vertical injection cell into which a mixture of sand, water, and Jobo oil was thoroughly mixed and packed. Two types of runs were conducted: a run where the tetralin and catalyst were mixed within the mixture before packing into the cell, and the other was conducted by injecting a slug of the tetralin-catalyst solution before commencing with the steam injection. The Jobo oil used had an oil gravity of 12.4° API and a viscosity of 7800 cp at 30°C. The injection cell was placed in a vacuum jacket and set to a reservoir temperature of 50°C. Superheated steam at 273°C was then injected into the injection cell at a rate of 5.5 cc/min (cold water equivalent). The cell outlet pressure was maintained at 500 psig. Produced liquid samples were collected periodically through a series of separators. The produced oil was divided into two halves and several measurements and analyses were carried out on them. These included viscosity, density, elemental analysis and liquid composition. Experimental results indicated that tetralin alone was a worthy additive and increased recovery by 15% compared to that of pure steam. The premixed tetralincatalyst run showed improved recovery to that of pure steam by 20%. Experiments also showed that, when the tetralin-catalyst solution was injected rather than mixed, the results were equivalent to tetralin injection runs. Oil production acceleration was displayed by all the runs with tetralin and tetralin-catalyst but was more pronounced with the availability of catalyst.
Author: Ahmad A. A Mohammad
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Experiments were conducted to investigate the feasibility of in situ upgrading of heavy oil by the use of an orgametallic catalyst and a hydrogen donor (tetralin). The experiments used a vertical injection cell into which a mixture of sand, water, and Jobo oil was thoroughly mixed and packed. Two types of runs were conducted: a run where the tetralin and catalyst were mixed within the mixture before packing into the cell, and the other was conducted by injecting a slug of the tetralin-catalyst solution before commencing with the steam injection. The Jobo oil used had an oil gravity of 12.4° API and a viscosity of 7800 cp at 30°C. The injection cell was placed in a vacuum jacket and set to a reservoir temperature of 50°C. Superheated steam at 273°C was then injected into the injection cell at a rate of 5.5 cc/min (cold water equivalent). The cell outlet pressure was maintained at 500 psig. Produced liquid samples were collected periodically through a series of separators. The produced oil was divided into two halves and several measurements and analyses were carried out on them. These included viscosity, density, elemental analysis and liquid composition. Experimental results indicated that tetralin alone was a worthy additive and increased recovery by 15% compared to that of pure steam. The premixed tetralincatalyst run showed improved recovery to that of pure steam by 20%. Experiments also showed that, when the tetralin-catalyst solution was injected rather than mixed, the results were equivalent to tetralin injection runs. Oil production acceleration was displayed by all the runs with tetralin and tetralin-catalyst but was more pronounced with the availability of catalyst.
Author: Zhiyong Zhang
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
This research is a study of the in-situ upgrading of Jobo crude oil using steam, tetralin or decalin, and catalyst (Fe(acac)3) at temperatures of 250 °C, 275 °C and 300 °C for 24 hours, 48 hours and 72 hours using an autoclave. Viscosity, API gravity and compositional changes were investigated. We found that tetralin and decalin alone were good solvents for heavy oil recovery. Tetralin or decalin at concentrations of 9% (weight basis) could reduce the Jobo crude oil viscosity measured at 50 °C by 44±2% and 39±3%. Steam alone had some upgrading effects. It could reduce the oil viscosity by 10% after 48 hours of contact at 300°C. Tetralin, decalin or catalyst showed some upgrading effects when used together with steam and caused 5.4±4%, 4±1% and 19±3% viscosity reduction compared with corresponding pre-upgrading mixture after 48 hours of reaction at 300°C. The combination of hydrogen donor tetralin or decalin and catalyst reduced the viscosity of the mixture the most, by 56±1% and 72±1% compared with pre-upgrading mixture. It meant that hydrogen donors and catalyst had strong synergetic effects on heavy oil upgrading. We also found that 300 °C was an effective temperature for heavy oil upgrading with obvious viscosity reduction in the presence of steam, hydrogen donors and catalyst. Reaction can be considered to have reached almost equilibrium condition after 48 hours. The GC-MS analysis of the gas component showed that light hydrocarbon gases and CO2 were generated after reaction. The viscosity reduction from decalin use is larger than that of tetralin because decalin has more hydrogen atoms per molecule than tetralin. A mechanism of transferring H (hydrogen atom) from H2O and hydrogen donors to heavy oil, which can lead to structure and composition changes in heavy oil, is explained. The study has demonstrated that in-situ heavy oil upgrading has great potential applications in heavy and extra heavy oil recovery.
Author: Mikhail A. Varfolomeev
Publisher: John Wiley & Sons
ISBN: 1119871492
Category : Technology & Engineering
Languages : en
Pages : 564
Get Book Here
Book Description
Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils A comprehensive guide to a cutting-edge and cost-effective refinement process for heavy oil Oil sufficiently viscous that it cannot flow normally from production wells is called heavy oil and constitutes as much as 70% of global oil reserves. Extracting and refining this oil can pose significant challenges, including very high transportation costs. As a result, processes which produce and partially refine heavy oil in situ, known as catalytic upgrading, are an increasingly important part of the heavy oil extraction process, and the reduced carbon footprint associated with these methods promises to make them even more significant in the coming years. Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils provides a comprehensive introduction to these processes. It introduces the properties and characteristics of heavy and extra-heavy oil before discussing different catalysts and catalyzing processes, their mechanisms and underlying physics, and more. It offers the full sweep of description and analysis required for petroleum and chemical engineers to understand this vital aspect of the modern oil industry. Readers will also find: Detailed discussion of subjects including electron paramagnetic resonance spectroscopy, nuclear magnetic resonance spectroscopy, and more Analysis of both liquid catalysts and nanoparticle catalysts A numerical simulation of the catalytic in-situ oil upgrading process Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils is a valuable reference for petroleum and chemical engineers as well as advanced undergraduate and graduate students in related fields.
Author: Cesar Ovalles
Publisher: CRC Press
ISBN: 1351721097
Category : Science
Languages : en
Pages : 304
Get Book Here
Book Description
Heavy crude oils and bitumen represent more than 50% of all hydrocarbons available on the planet. These feedstocks have a low amount of distillable material and high level of contaminants that make their production, transportation, and refining difficult and costly by conventional technologies. Subsurface Upgrading of Heavy Crude Oils and Bitumen is of interest to the petroleum industry mainly because of the advantages compared to aboveground counterparts. The author presents an in-depth account and a critical review of the progress of industry and academia in underground or In-Situ upgrading of heavy, extra-heavy oils and bitumen, as reported in the patent and open literature. This work is aimed to be a standalone monograph, so three chapters are dedicated to the composition of petroleum and fundamentals of crude oil production and refining. Key Features: Offers a multidisciplinary scope that will appeal to chemists, geologists, biologists, chemical engineers, and petroleum engineers Presents the advantages and disadvantages of the technologies considered Discusses economic and environmental considerations for all the routes evaluated and offers perspectives from experts in the field working with highlighted technologies
Author: Mohammadali Ahmadi
Publisher: Elsevier
ISBN: 0323908497
Category : Science
Languages : en
Pages : 512
Get Book Here
Book Description
Sustainable In-Situ Heavy Oil and Bitumen Recovery: Techniques, Case Studies, and Environmental Considerations delivers a critical reference for today’s energy engineers who want to gain an accurate understanding of anticipated GHG emissions in heavy oil recovery. Structured to break down every method with introductions, case studies, technical limitations and summaries, this reference gives engineers a look at the latest hybrid approaches needed to tackle heavy oil recoveries while calculating carbon footprints. Starting from basic definitions and rounding out with future challenges, this book will help energy engineers collectively evolve heavy oil recovery with sustainability applications in mind. Explains environmental footprint considerations within each recovery method Includes the latest hybrid methods such as Hybrid of Air-CO2N2 and Cyclic Steam Stimulation (CSS) Bridges practical knowledge through case studies, summaries and remaining technical challenges
Author: Alain-Yves Huc
Publisher: Editions TECHNIP
ISBN: 2710808900
Category : Science
Languages : en
Pages : 478
Get Book Here
Book Description
Heavy oils, extra-heavy oils and tar sands are major players for the future of energy.They represent a massive world resource, at least the size of conventional oils. They are found all over the world but Canada and Venezuela together account, by themselves, for more than half of world deposits. They share the same origin as the lighter conventional oils, but their geological fate drove them into thick, viscous tar-like crude oils. Most of them result from alteration processes mediated by microbial degradation. They are characterized by a low content of lighter cuts and a high content of impurities such as sulfur and nitrogen compounds and metals ; so, their production is difficult and deployment of specific processes is required in order to enhance their transportability and to upgrade them into valuable products meeting market needs, and honouring environmental requirements.Although these resources are increasingly becoming commercially producible, less than 1% of total heavy crude oil deposits worldwide are under active development. The voluntarily wide scope of this volume encompasses geology, production, transportation, upgrading, economics and environmental issues of heavy oils. It does not pretend to be exhaustive, but to provide an authoritative view of this very important energy resource.
Author: Chun Huh
Publisher: CRC Press
ISBN: 1351210343
Category : Science
Languages : en
Pages : 309
Get Book Here
Book Description
This book is a concise but well-organized introduction to nanotechnology (NT) which the upstream oil industry is now vigorously adapting to develop its own unique applications for improved oilfield operations and, oil and gas production. Its reader will learn nanotechnology fundamentals, be introduced to important NT products and applications from other industries and learn about the current state of development of various NT applications in the upstream oil industry, which include innovative use of nanoparticles for enhanced oil recovery; drilling and completions; reservoir sensing; and production operations and flow assurance. Key Features Exclusive title on potential of nanoparticle-based agents and interventions for improving myriad of oilfield operations Unique guide for nanotechnology applications developers and users for oil and gas production Introduces nanotechnology for oil and gas managers and engineers Includes research data discussions relevant to field Offers a practical applications-oriented approach
Author: Samir Huseynzade
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
In-situ upgrading of oil using hydrogen donors is a new process. In particular, very little research has been conducted with respect to in-situ oil upgrading using hydrogen donor under in-situ combustion. Several papers describe the use of metal additives mixed with oil and their influence on oil properties such as viscosity and API gravity. The main objective of my research is to determine if a catalyst mixed with a hydrogen donor (tetralin) is going to affect the Jobo crude oil properties while undergoing in-situ combustion. Six runs were performed with Jobo crude oil (9-11°API) from the Orinoco Belt in Venezuela. Four of the runs were successful. Two of them are base runs; the remaining ones are with tetralin with concentration of 5 wt% (of oil) and catalyst with concentration of 750 ppm. For all runs, the following were kept constant: the air injection rate (3 std. L/min) and production (combustion tube outlet) pressure, 300 psig. Concentration by weight of oil, water, and sand in the samples were approximately 4.8%, 4.2%, and 91% respectively. Oil viscosity at the end of combustion at 40°C decreased from 42.3 and 73.6 to 16.6 and 25.2; API gravity at the end of combustion increased from 18.4 and 16.8 to 20 and 18.8. Oil recovery is higher; combustion front velocity is faster in the case of additives, water production decreased. Since oil viscosity decreased and API gravity increased oil moves faster and consequently combustion time is lower.
Author: Jorge Ancheyta
Publisher: CRC Press
ISBN: 1000958108
Category : Technology & Engineering
Languages : en
Pages : 229
Get Book Here
Book Description
This book explores the common approaches to upgrade heavy and extra-heavy crude oils by means of catalytic hydrotreating, emphasizing hydrogen addition technology as well as carbon rejection alternatives. Kinetic and reactor models are combined with experimental data to simulate and optimize commercial-scale reactor performance. Key Features • Focuses on fixed-bed catalytic hydrotreating and catalysts and process scheme characteristics for commercial application. • Guides readers on hydrotreating process technology development from batch reactor experiments to semi-commercial test. • Describes step-by-step methodologies for development of kinetic models based on experimental data generated at different reaction scales. • Provides detailed explanation on how to formulate a reactor model for the simulation of catalytic hydrotreating of heavy oils. A comprehensive guide to the upgrading of crude oils, this book has particular appeal for petroleum refining industry professionals, catalyst developers, workshop instructors, professors, and their graduate and postgraduate students.
Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 584
Get Book Here
Book Description
