Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 5
Book Description
SLAC is developing a 10 MW, 5 Hz, 1.6 ms, L-band (1.3 GHz) Sheet-Beam Klystron as a less expensive and more compact alternative to the ILC baseline Multiple-Beam Klystron. The Klystron is intended as a plug-compatible device of the same beam current and operating voltage as existing Multiple-Beam Klystrons. At this time, a beam tester has been constructed and currently is in test. The beam tester includes an intercepting cup for making beam quality measurements of the 130 A, 40-to-1 aspect ratio beam. Measurements will be made of the electrostatic beam and of the beam after transporting through a drift tube and magnetic focusing system. General theory of operation, design trade-offs, and manufacturing considerations of both the beam tester and klystron will be discussed.
Development of a 10 MW Sheet Beam Klystron for the ILC.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 5
Book Description
SLAC is developing a 10 MW, 5 Hz, 1.6 ms, L-band (1.3 GHz) Sheet-Beam Klystron as a less expensive and more compact alternative to the ILC baseline Multiple-Beam Klystron. The Klystron is intended as a plug-compatible device of the same beam current and operating voltage as existing Multiple-Beam Klystrons. At this time, a beam tester has been constructed and currently is in test. The beam tester includes an intercepting cup for making beam quality measurements of the 130 A, 40-to-1 aspect ratio beam. Measurements will be made of the electrostatic beam and of the beam after transporting through a drift tube and magnetic focusing system. General theory of operation, design trade-offs, and manufacturing considerations of both the beam tester and klystron will be discussed.
Publisher:
ISBN:
Category :
Languages : en
Pages : 5
Book Description
SLAC is developing a 10 MW, 5 Hz, 1.6 ms, L-band (1.3 GHz) Sheet-Beam Klystron as a less expensive and more compact alternative to the ILC baseline Multiple-Beam Klystron. The Klystron is intended as a plug-compatible device of the same beam current and operating voltage as existing Multiple-Beam Klystrons. At this time, a beam tester has been constructed and currently is in test. The beam tester includes an intercepting cup for making beam quality measurements of the 130 A, 40-to-1 aspect ratio beam. Measurements will be made of the electrostatic beam and of the beam after transporting through a drift tube and magnetic focusing system. General theory of operation, design trade-offs, and manufacturing considerations of both the beam tester and klystron will be discussed.
Final Technical Report
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The attached report contains the final technical report for the above-mentioned project.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The attached report contains the final technical report for the above-mentioned project.
ILC Linac R & D at SLAC.
Author: C. Adolphsen
Publisher:
ISBN:
Category :
Languages : en
Pages : 4
Book Description
Since the ITRP recommendation in August 2004 to use superconducting rf technology for a next generation linear collider, the former NLC Group at SLAC has been actively pursuing a broad range of R & D for this collider (the ILC). In this paper, the programs concerning linac technology are reviewed. Current activities include the development of a Marx-style modulator and a 10 MW sheet-beam klystron, operation of an L-band (1.3 GHz) rf source using an SNS HVCM modulator and commercial klystrons, design of a more efficient and less costly rf distribution system, construction of a coupler component test stand, fabrication of a prototype positron capture cavity, beam tests of prototype S-band linac beam position monitors and preparations for magnetic center stability measurements of a prototype SC linac quad.
Publisher:
ISBN:
Category :
Languages : en
Pages : 4
Book Description
Since the ITRP recommendation in August 2004 to use superconducting rf technology for a next generation linear collider, the former NLC Group at SLAC has been actively pursuing a broad range of R & D for this collider (the ILC). In this paper, the programs concerning linac technology are reviewed. Current activities include the development of a Marx-style modulator and a 10 MW sheet-beam klystron, operation of an L-band (1.3 GHz) rf source using an SNS HVCM modulator and commercial klystrons, design of a more efficient and less costly rf distribution system, construction of a coupler component test stand, fabrication of a prototype positron capture cavity, beam tests of prototype S-band linac beam position monitors and preparations for magnetic center stability measurements of a prototype SC linac quad.
ILC RF System R and D.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The Linac Group at SLAC is actively pursuing a broad range of R & D to improve the reliability and reduce the cost of the L-band (1.3 GHz) rf system proposed for the ILC linacs. Current activities include the long-term evaluation of a 120 kV Marx Modulator driving a 10 MW Multi-Beam Klystron, design of a second-generation Marx Modulator, testing of a sheet-beam gun and beam transport system for a klystron, construction of an rf distribution system with remotely-adjustable power tapoffs, and development of a system to combine the power from many klystrons in low-loss circular waveguide where it would be tapped-off periodically to power groups of cavities. This paper surveys progress during the past few years.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The Linac Group at SLAC is actively pursuing a broad range of R & D to improve the reliability and reduce the cost of the L-band (1.3 GHz) rf system proposed for the ILC linacs. Current activities include the long-term evaluation of a 120 kV Marx Modulator driving a 10 MW Multi-Beam Klystron, design of a second-generation Marx Modulator, testing of a sheet-beam gun and beam transport system for a klystron, construction of an rf distribution system with remotely-adjustable power tapoffs, and development of a system to combine the power from many klystrons in low-loss circular waveguide where it would be tapped-off periodically to power groups of cavities. This paper surveys progress during the past few years.
Low Beam Voltage, 10 MW, L-Band Cluster Klystron
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 3
Book Description
Conceptual design of a multi-beam klystron (MBK) for possible ILC and Project X applications is presented. The chief distinction between this MBK design and existing 10-MW MBK's is the low operating voltage of 60 kV. There are at least four compelling reasons that justify development at this time of a low-voltage MBK, namely (1) no pulse transformer; (2) no oil tank for high-voltage components and for the tube socket; (3) no high-voltage cables; and (4) modulator would be a compact 60-kV IGBT switching circuit. The proposed klystron consists of four clusters containing six beams each. The tube has common input and output cavities for all 24 beams, and individual gain cavities for each cluster. A closely related optional configuration, also for a 10 MW tube, would involve four totally independent cavity clusters with four independent input cavities and four 2.5 MW output ports, all within a common magnetic circuit. This option has appeal because the output waveguides would not require a controlled atmosphere, and because it would be easier to achieve phase and amplitude stability as required in individual SC accelerator cavities.
Publisher:
ISBN:
Category :
Languages : en
Pages : 3
Book Description
Conceptual design of a multi-beam klystron (MBK) for possible ILC and Project X applications is presented. The chief distinction between this MBK design and existing 10-MW MBK's is the low operating voltage of 60 kV. There are at least four compelling reasons that justify development at this time of a low-voltage MBK, namely (1) no pulse transformer; (2) no oil tank for high-voltage components and for the tube socket; (3) no high-voltage cables; and (4) modulator would be a compact 60-kV IGBT switching circuit. The proposed klystron consists of four clusters containing six beams each. The tube has common input and output cavities for all 24 beams, and individual gain cavities for each cluster. A closely related optional configuration, also for a 10 MW tube, would involve four totally independent cavity clusters with four independent input cavities and four 2.5 MW output ports, all within a common magnetic circuit. This option has appeal because the output waveguides would not require a controlled atmosphere, and because it would be easier to achieve phase and amplitude stability as required in individual SC accelerator cavities.
200 KW CW Sheet Beam Klystron Research and Development
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 2
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 2
Book Description
Developing Sheet Beam Klystron Simulation Capability in AJDISK.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 6
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 6
Book Description
Le Voici
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 42
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 42
Book Description
International Linear Collider Technical Review Committee Second Report 2003
Author: International Linear Collider Technical Review Committee
Publisher:
ISBN:
Category : Linear colliders
Languages : en
Pages : 534
Book Description
Publisher:
ISBN:
Category : Linear colliders
Languages : en
Pages : 534
Book Description
The ILC Marx Modulator Development Program at SLAC.
Author: G. E. Leyh
Publisher:
ISBN:
Category :
Languages : en
Pages : 4
Book Description
The International Linear Collider [ILC] baseline design requires 576 L-band klystron stations, each supplying 10MW peak RF power to the accelerating structures. Each klystron requires a modulator capable of delivering 120kV, 140A 1.6ms pulses, at 5Hz. Solid-state Marx modulator topologies are rapidly becoming feasible with the advent of PC-board-level 4500V IGBTs, fast single junction HV diodes, high density capacitors, and sophisticated modeling software. Making full use of recent technology advances, the ILC Marx Modulator program at SLAC plans to pursue a 120kV solid-state Marx design, which appears to offer significantly higher efficiency, availability, and cost savings than existing modulator options.
Publisher:
ISBN:
Category :
Languages : en
Pages : 4
Book Description
The International Linear Collider [ILC] baseline design requires 576 L-band klystron stations, each supplying 10MW peak RF power to the accelerating structures. Each klystron requires a modulator capable of delivering 120kV, 140A 1.6ms pulses, at 5Hz. Solid-state Marx modulator topologies are rapidly becoming feasible with the advent of PC-board-level 4500V IGBTs, fast single junction HV diodes, high density capacitors, and sophisticated modeling software. Making full use of recent technology advances, the ILC Marx Modulator program at SLAC plans to pursue a 120kV solid-state Marx design, which appears to offer significantly higher efficiency, availability, and cost savings than existing modulator options.