Author: E. G. Bodine
Publisher:
ISBN:
Category : Deformation (Mechanics)
Languages : en
Pages : 668
Book Description
The objective of the present investigation was to study the interaction of bearing and tensile loads on the creep behavior of joints. To achieve this objective, a simplified model was employed which contained many of the features found in riveted connections. Through the use of this simulated joint, an analysis of complex regions in actual joints could be effected. In the study, results for a number of tensile-to-bearing load ratios were obtained, and the results were analyzed.
Creep Deformation Patterns of Joints Under Bearing and Tensile Loads
Author: E. G. Bodine
Publisher:
ISBN:
Category : Deformation (Mechanics)
Languages : en
Pages : 668
Book Description
The objective of the present investigation was to study the interaction of bearing and tensile loads on the creep behavior of joints. To achieve this objective, a simplified model was employed which contained many of the features found in riveted connections. Through the use of this simulated joint, an analysis of complex regions in actual joints could be effected. In the study, results for a number of tensile-to-bearing load ratios were obtained, and the results were analyzed.
Publisher:
ISBN:
Category : Deformation (Mechanics)
Languages : en
Pages : 668
Book Description
The objective of the present investigation was to study the interaction of bearing and tensile loads on the creep behavior of joints. To achieve this objective, a simplified model was employed which contained many of the features found in riveted connections. Through the use of this simulated joint, an analysis of complex regions in actual joints could be effected. In the study, results for a number of tensile-to-bearing load ratios were obtained, and the results were analyzed.
Technical Note - National Advisory Committee for Aeronautics
Author: United States. National Advisory Committee for Aeronautics
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1136
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1136
Book Description
Descriptions of Some Current Methods for Determining Creep Properties Under Compressive, Bearing and Shear Type Loading
Author: E. L. Horne
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 34
Book Description
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 34
Book Description
Monthly Catalog of United States Government Publications
Author:
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1698
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1698
Book Description
The Journal of the Royal Aeronautical Society
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1006
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1006
Book Description
Aeronautical Engineering Review
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1908
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1908
Book Description
Allowable Stresses for Elevated Temperature Structures
Author: C. G. Swanson
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 142
Book Description
Time-dependent methods of analysis for colums, stiffened and unstiffened plates, and torsional members have been developed and programmed for the IBM 709 digital computer. The important material behaviors, i.e., soaking at temperatures, elastic and plastic strain, creep and residual stress and strain under varying temperature inputs, can be accounted for in the digital solutions. Two illustrative examples for obtaining allowable stresses are shown; the first for a stable structure in combined tensile and bending and the second for a column subjected to time-dependent displacements due to creep. These two examples are sufficiently typical to demonstrate the applicability of the procedures developed in this report or other procedures which give the stress-strain-deflection time history of a structure.
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 142
Book Description
Time-dependent methods of analysis for colums, stiffened and unstiffened plates, and torsional members have been developed and programmed for the IBM 709 digital computer. The important material behaviors, i.e., soaking at temperatures, elastic and plastic strain, creep and residual stress and strain under varying temperature inputs, can be accounted for in the digital solutions. Two illustrative examples for obtaining allowable stresses are shown; the first for a stable structure in combined tensile and bending and the second for a column subjected to time-dependent displacements due to creep. These two examples are sufficiently typical to demonstrate the applicability of the procedures developed in this report or other procedures which give the stress-strain-deflection time history of a structure.
Index of NACA Technical Publications
Author: United States. National Advisory Committee for Aeronautics
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 388
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 388
Book Description
A Selected Listing of NASA Scientific and Technical Reports for ...
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 388
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 388
Book Description
Technical News Bulletin
Author:
Publisher:
ISBN:
Category : Technology
Languages : en
Pages : 262
Book Description
Publisher:
ISBN:
Category : Technology
Languages : en
Pages : 262
Book Description