Author: Ron Charles McKinnon
Publisher: CRC Press
ISBN: 9781420032666
Category : Technology & Engineering
Languages : en
Pages : 288
Book Description
Accident: an undesired event that results in loss. Most people give little thought to accidents or their prevention. Health and safety professionals face this challenge, and its associated costs and losses, both human and financial, every day. Cause, Effect, and Control of Accidental Loss with Accident Investigation Kit provides the tools you need
Cause, Effect, and Control of Accidental Loss with Accident Investigation Kit
Author: Ron Charles McKinnon
Publisher: CRC Press
ISBN: 9781420032666
Category : Technology & Engineering
Languages : en
Pages : 288
Book Description
Accident: an undesired event that results in loss. Most people give little thought to accidents or their prevention. Health and safety professionals face this challenge, and its associated costs and losses, both human and financial, every day. Cause, Effect, and Control of Accidental Loss with Accident Investigation Kit provides the tools you need
Publisher: CRC Press
ISBN: 9781420032666
Category : Technology & Engineering
Languages : en
Pages : 288
Book Description
Accident: an undesired event that results in loss. Most people give little thought to accidents or their prevention. Health and safety professionals face this challenge, and its associated costs and losses, both human and financial, every day. Cause, Effect, and Control of Accidental Loss with Accident Investigation Kit provides the tools you need
The Cause, Effect, and Control of Accidental Loss
Author: Ron C. McKinnon
Publisher: CRC Press
ISBN: 1000869296
Category : Technology & Engineering
Languages : en
Pages : 228
Book Description
The Cause, Effect, and Control of Accidental Loss takes the reader through 15 phases of a typical workplace accident and shows how accidents can be prevented by the introduction of safety management controls in the form of a structured health and safety management system (SMS). It proposes that once the event has been triggered, there is no certainty as to the outcome, so workplaces should rely on proactive safety actions rather than reactive ones. Now fully updated, this new edition expands on the important concepts from the first edition, including hazard identification, risk assessment, flawed safety management systems, the potential for loss, and management control. This title: Challenges the paradigm that the measure of consequence (losses) is a good indicator of safety effort Introduces three luck factors that determine the course of the accident sequence Explains what causes accidents, their consequences, and how to prevent them Showcases accident immediate causes including high-risk (unsafe) acts and high-risk (unsafe) conditions The text is an essential read for professionals, graduate students, and academics in the field of occupational health, safety, and industrial hygiene.
Publisher: CRC Press
ISBN: 1000869296
Category : Technology & Engineering
Languages : en
Pages : 228
Book Description
The Cause, Effect, and Control of Accidental Loss takes the reader through 15 phases of a typical workplace accident and shows how accidents can be prevented by the introduction of safety management controls in the form of a structured health and safety management system (SMS). It proposes that once the event has been triggered, there is no certainty as to the outcome, so workplaces should rely on proactive safety actions rather than reactive ones. Now fully updated, this new edition expands on the important concepts from the first edition, including hazard identification, risk assessment, flawed safety management systems, the potential for loss, and management control. This title: Challenges the paradigm that the measure of consequence (losses) is a good indicator of safety effort Introduces three luck factors that determine the course of the accident sequence Explains what causes accidents, their consequences, and how to prevent them Showcases accident immediate causes including high-risk (unsafe) acts and high-risk (unsafe) conditions The text is an essential read for professionals, graduate students, and academics in the field of occupational health, safety, and industrial hygiene.
Cause, Effect, and Control of Accidental Loss with Accident Investigation Kit
Author: Ron Charles McKinnon
Publisher: CRC Press
ISBN: 0429524900
Category : Technology & Engineering
Languages : en
Pages : 261
Book Description
Accident: an undesired event that results in loss. Most people give little thought to accidents or their prevention. Health and safety professionals face this challenge, and its associated costs and losses, both human and financial, every day. Cause, Effect, and Control of Accidental Loss with Accident Investigation Kit provides the tools you need
Publisher: CRC Press
ISBN: 0429524900
Category : Technology & Engineering
Languages : en
Pages : 261
Book Description
Accident: an undesired event that results in loss. Most people give little thought to accidents or their prevention. Health and safety professionals face this challenge, and its associated costs and losses, both human and financial, every day. Cause, Effect, and Control of Accidental Loss with Accident Investigation Kit provides the tools you need
Measuring Safety Management Performance
Author: Ron C. McKinnon
Publisher: CRC Press
ISBN: 1000998703
Category : Technology & Engineering
Languages : en
Pages : 308
Book Description
Measuring Safety Management Performance lists and explains the difference between lagging and leading measures of safety management performance. It informs the reader how to use both proactive and reactive safety performance indicators and explains that consequence measurement is not an accurate reflection of the organization’s safety effort. It suggests managements’ Safety Performance Indicators (SPI) should be changed to proactive, positive measures of action and activities which can be controlled and accurately measured. A roadmap of a holistic system for measurement is offered that covers health and safety performance. It shows how management is traditionally informed about where they have been by information provided relating to injury data, rather than proactive, measurable, and controllable data on accident prevention efforts provided by the health and safety management system (SMS), which indicate where they are going. This highly practical book features examples of safety performance indicators, provides positive guidelines for accurate safety performance measurement, and is based on actual workplace experiences. It explains the strengths and weaknesses of proactive and reactive measurement metrics and gives examples of leading and lagging safety performance indicators. This book will be an ideal read for professionals and graduate students in the fields of occupational health and safety, ergonomics, and human factors engineering. It will have resonance with managers and professionals engaged in health and safety provisions at their place of work.
Publisher: CRC Press
ISBN: 1000998703
Category : Technology & Engineering
Languages : en
Pages : 308
Book Description
Measuring Safety Management Performance lists and explains the difference between lagging and leading measures of safety management performance. It informs the reader how to use both proactive and reactive safety performance indicators and explains that consequence measurement is not an accurate reflection of the organization’s safety effort. It suggests managements’ Safety Performance Indicators (SPI) should be changed to proactive, positive measures of action and activities which can be controlled and accurately measured. A roadmap of a holistic system for measurement is offered that covers health and safety performance. It shows how management is traditionally informed about where they have been by information provided relating to injury data, rather than proactive, measurable, and controllable data on accident prevention efforts provided by the health and safety management system (SMS), which indicate where they are going. This highly practical book features examples of safety performance indicators, provides positive guidelines for accurate safety performance measurement, and is based on actual workplace experiences. It explains the strengths and weaknesses of proactive and reactive measurement metrics and gives examples of leading and lagging safety performance indicators. This book will be an ideal read for professionals and graduate students in the fields of occupational health and safety, ergonomics, and human factors engineering. It will have resonance with managers and professionals engaged in health and safety provisions at their place of work.
Changing the Workplace Safety Culture
Author: Ron C. McKinnon
Publisher: CRC Press
ISBN: 1466567694
Category : Technology & Engineering
Languages : en
Pages : 241
Book Description
Despite the fact that workplaces have implemented and followed new safety innovations and approaches, the majority of them have seen little, if any, significant progress in the reduction of accidental deaths and injuries. Changing the Workplace Safety Culture demonstrates that changing the way an organization views and practices safety will impact
Publisher: CRC Press
ISBN: 1466567694
Category : Technology & Engineering
Languages : en
Pages : 241
Book Description
Despite the fact that workplaces have implemented and followed new safety innovations and approaches, the majority of them have seen little, if any, significant progress in the reduction of accidental deaths and injuries. Changing the Workplace Safety Culture demonstrates that changing the way an organization views and practices safety will impact
A Practical Guide to Effective Workplace Accident Investigation
Author: Ron C. McKinnon
Publisher: CRC Press
ISBN: 1000569144
Category : Technology & Engineering
Languages : en
Pages : 272
Book Description
This book explains how accidents and high potential near-miss incidents are caused, and how to eliminate recurrences by effective accident investigation methods. It shows how to conduct an immediate and root cause analysis so that remedial measures can be taken to prevent a recurrence of similar events. The book shows how to apply the Logical Sequence Accident Investigation Method in the case studies presented. The book: Provides a practical guide to accident causes, investigation and prevention. Explains immediate and root causes in detail. Gives a number of problem-solving methods for the accident investigator to use. Introduces the Logical Sequence Accident Investigation Method. Provides a practical accident investigation evaluation system. The book discusses important topics including hazard identification and risk assessment, workplace health and safety, accident causation and prevention theories, the updated accident domino sequence, as well as safety management system standards and controls. The text is primarily written for professionals and graduate students in the fields of occupational health and safety, ergonomics and human factors engineering.
Publisher: CRC Press
ISBN: 1000569144
Category : Technology & Engineering
Languages : en
Pages : 272
Book Description
This book explains how accidents and high potential near-miss incidents are caused, and how to eliminate recurrences by effective accident investigation methods. It shows how to conduct an immediate and root cause analysis so that remedial measures can be taken to prevent a recurrence of similar events. The book shows how to apply the Logical Sequence Accident Investigation Method in the case studies presented. The book: Provides a practical guide to accident causes, investigation and prevention. Explains immediate and root causes in detail. Gives a number of problem-solving methods for the accident investigator to use. Introduces the Logical Sequence Accident Investigation Method. Provides a practical accident investigation evaluation system. The book discusses important topics including hazard identification and risk assessment, workplace health and safety, accident causation and prevention theories, the updated accident domino sequence, as well as safety management system standards and controls. The text is primarily written for professionals and graduate students in the fields of occupational health and safety, ergonomics and human factors engineering.
Safety Management
Author: Ron C. McKinnon
Publisher: CRC Press
ISBN: 1040179266
Category : Technology & Engineering
Languages : en
Pages : 217
Book Description
Close calls, narrow escapes, or near hits. History has shown repeatedly that these "near-miss" incidents often precede loss producing events, but are largely ignored or go unreported because nothing (no injury, damage or loss) happened. Thus, many opportunities to prevent the accidents that the organization has not yet had are lost. Recognizing and
Publisher: CRC Press
ISBN: 1040179266
Category : Technology & Engineering
Languages : en
Pages : 217
Book Description
Close calls, narrow escapes, or near hits. History has shown repeatedly that these "near-miss" incidents often precede loss producing events, but are largely ignored or go unreported because nothing (no injury, damage or loss) happened. Thus, many opportunities to prevent the accidents that the organization has not yet had are lost. Recognizing and
Risk-based, Management-led, Audit-driven, Safety Management Systems
Author: Ron C. McKinnon
Publisher: CRC Press
ISBN: 1315394219
Category : Technology & Engineering
Languages : en
Pages : 267
Book Description
Risk-based, Management-led, Audit-driven, Safety Management Systems, explains what a safety management system (SMS) is, and how it reduces risk in order to prevent accidental losses in an organization. It advocates the integration of safety and health into the day-to-day management of the enterprise as a value, rather than an add-on, and emphasizes that the safety movement must be initiated, led and maintained by management at all levels. The concepts of safety authority, responsibility and accountability are described as the key ingredients to safety system success. Safety system audits are expounded in simple terms, and leading safety performance indicators are suggested as the most important measurements, in preference to lagging indicators. McKinnon highlights the importance of the identification and control of risk as a key basis for a SMS, with examples of a simple risk matrix and daily task risk assessment, as well as a simplified method of assessing, analyzing, and controlling risks. The book refers to international Guidelines on SMS, as well as the proposed International Organization for Standardization (ISO) 45001, which could soon become the international safety benchmark for organizations worldwide. Using clear, approachable examples, the chapters give a complete overview of an SMS and its components. Confirming to most of the safety management system Guidelines published by leading world authorities, this volume will allow organizations to structure their own world-class SMS.
Publisher: CRC Press
ISBN: 1315394219
Category : Technology & Engineering
Languages : en
Pages : 267
Book Description
Risk-based, Management-led, Audit-driven, Safety Management Systems, explains what a safety management system (SMS) is, and how it reduces risk in order to prevent accidental losses in an organization. It advocates the integration of safety and health into the day-to-day management of the enterprise as a value, rather than an add-on, and emphasizes that the safety movement must be initiated, led and maintained by management at all levels. The concepts of safety authority, responsibility and accountability are described as the key ingredients to safety system success. Safety system audits are expounded in simple terms, and leading safety performance indicators are suggested as the most important measurements, in preference to lagging indicators. McKinnon highlights the importance of the identification and control of risk as a key basis for a SMS, with examples of a simple risk matrix and daily task risk assessment, as well as a simplified method of assessing, analyzing, and controlling risks. The book refers to international Guidelines on SMS, as well as the proposed International Organization for Standardization (ISO) 45001, which could soon become the international safety benchmark for organizations worldwide. Using clear, approachable examples, the chapters give a complete overview of an SMS and its components. Confirming to most of the safety management system Guidelines published by leading world authorities, this volume will allow organizations to structure their own world-class SMS.
Operational Risk Management
Author: Ron S. Kenett
Publisher: John Wiley & Sons
ISBN: 1119956722
Category : Business & Economics
Languages : en
Pages : 339
Book Description
Models and methods for operational risks assessment and mitigation are gaining importance in financial institutions, healthcare organizations, industry, businesses and organisations in general. This book introduces modern Operational Risk Management and describes how various data sources of different types, both numeric and semantic sources such as text can be integrated and analyzed. The book also demonstrates how Operational Risk Management is synergetic to other risk management activities such as Financial Risk Management and Safety Management. Operational Risk Management: a practical approach to intelligent data analysis provides practical and tested methodologies for combining structured and unstructured, semantic-based data, and numeric data, in Operational Risk Management (OpR) data analysis. Key Features: The book is presented in four parts: 1) Introduction to OpR Management, 2) Data for OpR Management, 3) OpR Analytics and 4) OpR Applications and its Integration with other Disciplines. Explores integration of semantic, unstructured textual data, in Operational Risk Management. Provides novel techniques for combining qualitative and quantitative information to assess risks and design mitigation strategies. Presents a comprehensive treatment of "near-misses" data and incidents in Operational Risk Management. Looks at case studies in the financial and industrial sector. Discusses application of ontology engineering to model knowledge used in Operational Risk Management. Many real life examples are presented, mostly based on the MUSING project co-funded by the EU FP6 Information Society Technology Programme. It provides a unique multidisciplinary perspective on the important and evolving topic of Operational Risk Management. The book will be useful to operational risk practitioners, risk managers in banks, hospitals and industry looking for modern approaches to risk management that combine an analysis of structured and unstructured data. The book will also benefit academics interested in research in this field, looking for techniques developed in response to real world problems.
Publisher: John Wiley & Sons
ISBN: 1119956722
Category : Business & Economics
Languages : en
Pages : 339
Book Description
Models and methods for operational risks assessment and mitigation are gaining importance in financial institutions, healthcare organizations, industry, businesses and organisations in general. This book introduces modern Operational Risk Management and describes how various data sources of different types, both numeric and semantic sources such as text can be integrated and analyzed. The book also demonstrates how Operational Risk Management is synergetic to other risk management activities such as Financial Risk Management and Safety Management. Operational Risk Management: a practical approach to intelligent data analysis provides practical and tested methodologies for combining structured and unstructured, semantic-based data, and numeric data, in Operational Risk Management (OpR) data analysis. Key Features: The book is presented in four parts: 1) Introduction to OpR Management, 2) Data for OpR Management, 3) OpR Analytics and 4) OpR Applications and its Integration with other Disciplines. Explores integration of semantic, unstructured textual data, in Operational Risk Management. Provides novel techniques for combining qualitative and quantitative information to assess risks and design mitigation strategies. Presents a comprehensive treatment of "near-misses" data and incidents in Operational Risk Management. Looks at case studies in the financial and industrial sector. Discusses application of ontology engineering to model knowledge used in Operational Risk Management. Many real life examples are presented, mostly based on the MUSING project co-funded by the EU FP6 Information Society Technology Programme. It provides a unique multidisciplinary perspective on the important and evolving topic of Operational Risk Management. The book will be useful to operational risk practitioners, risk managers in banks, hospitals and industry looking for modern approaches to risk management that combine an analysis of structured and unstructured data. The book will also benefit academics interested in research in this field, looking for techniques developed in response to real world problems.
Applications of Nuclear and Radioisotope Technology
Author: Khalid Alnabhani
Publisher: Academic Press
ISBN: 0128232269
Category : Technology & Engineering
Languages : en
Pages : 521
Book Description
Applications of Nuclear and Radioisotope Technology: For Peace and Sustainable Development presents the latest technology and research on nuclear energy with a practical focus on a variety of applications. Author Dr. Khalid Al-Nabhani provides a thorough and well-rounded view of the status of nuclear power generation in order to promote its benefits towards a sustainable, clean and secure future. This book offers innovative theoretical, analytical, methodological and technological approaches, encourages a positive societal and political uptake.This book enhances awareness of peaceful nuclear applications across a broad spectrum of industries, including power generation, agriculture, and medicine. It presents successful examples and lessons learned across many countries that are working towards their sustainability goals in cooperation with the IAEA and AAEA, to benefit researchers, professionals and decision-makers implementing and developing their own nuclear strategies for the future. - Presents theoretical and scientific knowledge which is supported with real examples and successful experiences - Provides prevailing perceptions of nuclear safety and security concerns by presenting the most advanced safety and security systems - Applies technologies to a variety of applications to guide the reader to make informed decisions to help meet sustainability goals
Publisher: Academic Press
ISBN: 0128232269
Category : Technology & Engineering
Languages : en
Pages : 521
Book Description
Applications of Nuclear and Radioisotope Technology: For Peace and Sustainable Development presents the latest technology and research on nuclear energy with a practical focus on a variety of applications. Author Dr. Khalid Al-Nabhani provides a thorough and well-rounded view of the status of nuclear power generation in order to promote its benefits towards a sustainable, clean and secure future. This book offers innovative theoretical, analytical, methodological and technological approaches, encourages a positive societal and political uptake.This book enhances awareness of peaceful nuclear applications across a broad spectrum of industries, including power generation, agriculture, and medicine. It presents successful examples and lessons learned across many countries that are working towards their sustainability goals in cooperation with the IAEA and AAEA, to benefit researchers, professionals and decision-makers implementing and developing their own nuclear strategies for the future. - Presents theoretical and scientific knowledge which is supported with real examples and successful experiences - Provides prevailing perceptions of nuclear safety and security concerns by presenting the most advanced safety and security systems - Applies technologies to a variety of applications to guide the reader to make informed decisions to help meet sustainability goals