Author: Applied Research Associates
Publisher:
ISBN:
Category : AASHTO Mechanistic-empirical pavement design guide
Languages : en
Pages : 196
Book Description
This report documents efforts of the Arizona Department of Transportation (ADOT) to implement the American Association of State Highway and Transportation Officials (AASHTO) DARWin-ME pavement design guide in Arizona. The research team also prepared a practical stand-alone user's guide that provides guidance for obtaining inputs, conducting design, and establishing the recommended pavement design. Implementation focused on identifying the desired pavement design application of flexible hot-mix asphalt (HMA) pavements, composite pavements (thin asphalt rubber friction course over jointed plain concrete pavement [JPCP] and continuously reinforced concrete pavement [CRCP]), JPCP, and HMA overlays of flexible pavement; characterizing materials and subgrades; determining traffic loadings (conducted under Darter et al. 2010); collecting and assembling DARWin-ME input data from 180 Long Term Pavement Performance and pavement management system sections of flexible, rigid, composite, and rehabilitated pavements; calibrating the DARWin-ME distress and International Roughness Index (IRI) prediction models to Arizona conditions; and training ADOT staff. Several biased distress and IRI models were corrected through the local calibration of Arizona pavements. Several key inputs were more accurately defined and Arizona defaults provided (e.g., subgrade resilient modulus). The calibration process improved these models through verification, validation, and calibration with Arizona data. Overall, the inputs and calibrated models will provide more accurate, reliable, and cost-effective pavement designs than designs created with global calibrations.--Abstract, Technical report documentation page.
Calibration and Implementation of the AASHTO Mechanistic-empirical Pavement Design Guide in Arizona
Author: Applied Research Associates
Publisher:
ISBN:
Category : AASHTO Mechanistic-empirical pavement design guide
Languages : en
Pages : 196
Book Description
This report documents efforts of the Arizona Department of Transportation (ADOT) to implement the American Association of State Highway and Transportation Officials (AASHTO) DARWin-ME pavement design guide in Arizona. The research team also prepared a practical stand-alone user's guide that provides guidance for obtaining inputs, conducting design, and establishing the recommended pavement design. Implementation focused on identifying the desired pavement design application of flexible hot-mix asphalt (HMA) pavements, composite pavements (thin asphalt rubber friction course over jointed plain concrete pavement [JPCP] and continuously reinforced concrete pavement [CRCP]), JPCP, and HMA overlays of flexible pavement; characterizing materials and subgrades; determining traffic loadings (conducted under Darter et al. 2010); collecting and assembling DARWin-ME input data from 180 Long Term Pavement Performance and pavement management system sections of flexible, rigid, composite, and rehabilitated pavements; calibrating the DARWin-ME distress and International Roughness Index (IRI) prediction models to Arizona conditions; and training ADOT staff. Several biased distress and IRI models were corrected through the local calibration of Arizona pavements. Several key inputs were more accurately defined and Arizona defaults provided (e.g., subgrade resilient modulus). The calibration process improved these models through verification, validation, and calibration with Arizona data. Overall, the inputs and calibrated models will provide more accurate, reliable, and cost-effective pavement designs than designs created with global calibrations.--Abstract, Technical report documentation page.
Publisher:
ISBN:
Category : AASHTO Mechanistic-empirical pavement design guide
Languages : en
Pages : 196
Book Description
This report documents efforts of the Arizona Department of Transportation (ADOT) to implement the American Association of State Highway and Transportation Officials (AASHTO) DARWin-ME pavement design guide in Arizona. The research team also prepared a practical stand-alone user's guide that provides guidance for obtaining inputs, conducting design, and establishing the recommended pavement design. Implementation focused on identifying the desired pavement design application of flexible hot-mix asphalt (HMA) pavements, composite pavements (thin asphalt rubber friction course over jointed plain concrete pavement [JPCP] and continuously reinforced concrete pavement [CRCP]), JPCP, and HMA overlays of flexible pavement; characterizing materials and subgrades; determining traffic loadings (conducted under Darter et al. 2010); collecting and assembling DARWin-ME input data from 180 Long Term Pavement Performance and pavement management system sections of flexible, rigid, composite, and rehabilitated pavements; calibrating the DARWin-ME distress and International Roughness Index (IRI) prediction models to Arizona conditions; and training ADOT staff. Several biased distress and IRI models were corrected through the local calibration of Arizona pavements. Several key inputs were more accurately defined and Arizona defaults provided (e.g., subgrade resilient modulus). The calibration process improved these models through verification, validation, and calibration with Arizona data. Overall, the inputs and calibrated models will provide more accurate, reliable, and cost-effective pavement designs than designs created with global calibrations.--Abstract, Technical report documentation page.
Guide for the Local Calibration of the Mechanistic-empirical Pavement Design Guide
Author:
Publisher: AASHTO
ISBN: 1560514493
Category : Technology & Engineering
Languages : en
Pages : 202
Book Description
This guide provides guidance to calibrate the Mechanistic-Empirical Pavement Design Guide (MEPDG) software to local conditions, policies, and materials. It provides the highway community with a state-of-the-practice tool for the design of new and rehabilitated pavement structures, based on mechanistic-empirical (M-E) principles. The design procedure calculates pavement responses (stresses, strains, and deflections) and uses those responses to compute incremental damage over time. The procedure empirically relates the cumulative damage to observed pavement distresses.
Publisher: AASHTO
ISBN: 1560514493
Category : Technology & Engineering
Languages : en
Pages : 202
Book Description
This guide provides guidance to calibrate the Mechanistic-Empirical Pavement Design Guide (MEPDG) software to local conditions, policies, and materials. It provides the highway community with a state-of-the-practice tool for the design of new and rehabilitated pavement structures, based on mechanistic-empirical (M-E) principles. The design procedure calculates pavement responses (stresses, strains, and deflections) and uses those responses to compute incremental damage over time. The procedure empirically relates the cumulative damage to observed pavement distresses.
Proceedings of the 10th International Conference on Maintenance and Rehabilitation of Pavements
Author: Paulo Pereira
Publisher: Springer Nature
ISBN: 3031635884
Category :
Languages : en
Pages : 643
Book Description
Publisher: Springer Nature
ISBN: 3031635884
Category :
Languages : en
Pages : 643
Book Description
Implementation of the AASHTO Mechanistic-empirical Pavement Design Guide and Software
Author:
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 84
Book Description
Introduction -- Mechanistic-Empirical Pavement Design Guide and AASHTOWare Pavement ME Design (TM) Software Overview -- Survey of Agency Pavement Design Practices -- Common Elements of Agency Implementation Plans -- Case Examples of Agency Implementation -- Conclusions.
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 84
Book Description
Introduction -- Mechanistic-Empirical Pavement Design Guide and AASHTOWare Pavement ME Design (TM) Software Overview -- Survey of Agency Pavement Design Practices -- Common Elements of Agency Implementation Plans -- Case Examples of Agency Implementation -- Conclusions.
Development of a Master Plan for Calibration and Implementation of the Mechanistic Empirical Pavement Design Guide
Author: Kevin Dale Hall
Publisher:
ISBN:
Category : Cement
Languages : en
Pages : 35
Book Description
Publisher:
ISBN:
Category : Cement
Languages : en
Pages : 35
Book Description
Local Calibration of the Mechanistic Empirical Pavement Design Guide for Kansas
Author: Abu Ahmed Sufian
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The Kansas Department of Transportation is transitioning from adherence to the 1993 American Association of State Highway and Transportation Officials (AASHTO) Pavement Design Guide to implementation of the new AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG) for flexible and rigid pavement design. This study was initiated to calibrate MEPDG distress models for Kansas. Twenty-seven newly constructed projects were selected for flexible pavement distress model calibration, 21 of which were used for calibration and six that were selected for validation. In addition, 22 newly constructed jointed plain concrete pavements (JPCPs) were selected to calibrate rigid models; 17 of those projects were selected for calibration and five were selected for validation. AASHTOWare Pavement ME Design (ver. 2.2) software was used for design analysis, and the traditional split sampling method was followed in calibration. MEPDG-predicted distresses of Kansas road segments were compared with those from Pavement Management Information System data. Statistical analysis was performed using the Microsoft Excel statistical toolbox. The rutting and roughness models for flexible pavement were successfully calibrated with reduced bias and accepted null hypothesis. Calibration of the top-down fatigue cracking model was not satisfactory due to variability in measured data, and the bottom-up fatigue cracking model was not calibrated because measured data was unavailable. AASHTOWare software did not predict transverse cracking for any projects with global values. Thus thermal cracking model was not calibrated. The JPCP transverse joint faulting model was calibrated using sensitivity analysis and iterative runs of AASHTOWare to determine optimal coefficients that minimize bias. The IRI model was calibrated using the generalized reduced gradient nonlinear optimization technique in Microsoft Excel Solver. The transverse slab cracking model could not be calibrated due to lack of measured cracking data.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The Kansas Department of Transportation is transitioning from adherence to the 1993 American Association of State Highway and Transportation Officials (AASHTO) Pavement Design Guide to implementation of the new AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG) for flexible and rigid pavement design. This study was initiated to calibrate MEPDG distress models for Kansas. Twenty-seven newly constructed projects were selected for flexible pavement distress model calibration, 21 of which were used for calibration and six that were selected for validation. In addition, 22 newly constructed jointed plain concrete pavements (JPCPs) were selected to calibrate rigid models; 17 of those projects were selected for calibration and five were selected for validation. AASHTOWare Pavement ME Design (ver. 2.2) software was used for design analysis, and the traditional split sampling method was followed in calibration. MEPDG-predicted distresses of Kansas road segments were compared with those from Pavement Management Information System data. Statistical analysis was performed using the Microsoft Excel statistical toolbox. The rutting and roughness models for flexible pavement were successfully calibrated with reduced bias and accepted null hypothesis. Calibration of the top-down fatigue cracking model was not satisfactory due to variability in measured data, and the bottom-up fatigue cracking model was not calibrated because measured data was unavailable. AASHTOWare software did not predict transverse cracking for any projects with global values. Thus thermal cracking model was not calibrated. The JPCP transverse joint faulting model was calibrated using sensitivity analysis and iterative runs of AASHTOWare to determine optimal coefficients that minimize bias. The IRI model was calibrated using the generalized reduced gradient nonlinear optimization technique in Microsoft Excel Solver. The transverse slab cracking model could not be calibrated due to lack of measured cracking data.
Eleventh International Conference on the Bearing Capacity of Roads, Railways and Airfields
Author: Inge Hoff
Publisher: CRC Press
ISBN: 100073871X
Category : Technology & Engineering
Languages : en
Pages : 673
Book Description
Innovations in Road, Railway and Airfield Bearing Capacity – Volume 3 comprises the third part of contributions to the 11th International Conference on Bearing Capacity of Roads, Railways and Airfields (2022). In anticipation of the event, it unveils state-of-the-art information and research on the latest policies, traffic loading measurements, in-situ measurements and condition surveys, functional testing, deflection measurement evaluation, structural performance prediction for pavements and tracks, new construction and rehabilitation design systems, frost affected areas, drainage and environmental effects, reinforcement, traditional and recycled materials, full scale testing and on case histories of road, railways and airfields. This edited work is intended for a global audience of road, railway and airfield engineers, researchers and consultants, as well as building and maintenance companies looking to further upgrade their practices in the field.
Publisher: CRC Press
ISBN: 100073871X
Category : Technology & Engineering
Languages : en
Pages : 673
Book Description
Innovations in Road, Railway and Airfield Bearing Capacity – Volume 3 comprises the third part of contributions to the 11th International Conference on Bearing Capacity of Roads, Railways and Airfields (2022). In anticipation of the event, it unveils state-of-the-art information and research on the latest policies, traffic loading measurements, in-situ measurements and condition surveys, functional testing, deflection measurement evaluation, structural performance prediction for pavements and tracks, new construction and rehabilitation design systems, frost affected areas, drainage and environmental effects, reinforcement, traditional and recycled materials, full scale testing and on case histories of road, railways and airfields. This edited work is intended for a global audience of road, railway and airfield engineers, researchers and consultants, as well as building and maintenance companies looking to further upgrade their practices in the field.
Mechanistic-empirical Pavement Design Guide
Author: American Association of State Highway and Transportation Officials
Publisher: AASHTO
ISBN: 156051423X
Category : Pavements
Languages : en
Pages : 218
Book Description
Publisher: AASHTO
ISBN: 156051423X
Category : Pavements
Languages : en
Pages : 218
Book Description
Implementation of the AASHTO Mechanistic-Empirical Design Guide (AASHTOWare Pavement ME Design) for Pavement Rehabilitation
Author: Shuvo Islam
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
The AASHTOWare Pavement ME Design (PMED) is a novel design method for new and rehabilitated pavement designs based on mechanistic-empirical design principles. The design process includes several empirical models calibrated with pavement performance data from pavement sections throughout the United States. Improved accuracy of the design process requires that the models be calibrated to local conditions. Therefore, the objective of this study was to implement the AASHTOWare PMED software for rehabilitated pavement design by performing local calibration for state-managed roads in Kansas, New Jersey, and Maine. Transfer functions for translating mechanistic pavement responses into visible distresses embedded in the AASHTOWare PMED software were locally calibrated to eliminate bias and reduce the standard error for rehabilitated pavements in Kansas and New York. Calibration was performed using version 2.5 and then verified with version 2.6.2.2, which was released in September 2022. Rehabilitated pavement sections included asphalt concrete (AC) over AC in Kansas and the New England region and jointed plain concrete pavement (JPCP) sections in Kansas. Because the PMED software requires periodic recalibration of the prediction models to account for improvements in the models, changes in agency design and construction strategies, and updates in performance data, this study also developed an automated technique for calibrating the AASHTOWare PMED software performance models. This automated methodology incorporated robust sampling techniques to verify calibrated PMED models. In addition, statistical equivalence testing was incorporated to ensure PMED-predicted performance results tended to agree with the in-situ data. A comparison of results for the AASHTOWare PMED versions 2.5 and 2.6.2.2 showed that most predicted distress values in Kansas remained the same, except for the predicted AC total fatigue cracking, specifically asphalt bottom-up fatigue cracking. For both distress types, slightly higher values were obtained with version 2.6.2.2. Results of three candidate crack tests showed that IDEAL-CT test results can be used as cracking-resistance criterion for mixtures in Kansas. The rehabilitation models were also successfully calibrated for the New England region.
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
The AASHTOWare Pavement ME Design (PMED) is a novel design method for new and rehabilitated pavement designs based on mechanistic-empirical design principles. The design process includes several empirical models calibrated with pavement performance data from pavement sections throughout the United States. Improved accuracy of the design process requires that the models be calibrated to local conditions. Therefore, the objective of this study was to implement the AASHTOWare PMED software for rehabilitated pavement design by performing local calibration for state-managed roads in Kansas, New Jersey, and Maine. Transfer functions for translating mechanistic pavement responses into visible distresses embedded in the AASHTOWare PMED software were locally calibrated to eliminate bias and reduce the standard error for rehabilitated pavements in Kansas and New York. Calibration was performed using version 2.5 and then verified with version 2.6.2.2, which was released in September 2022. Rehabilitated pavement sections included asphalt concrete (AC) over AC in Kansas and the New England region and jointed plain concrete pavement (JPCP) sections in Kansas. Because the PMED software requires periodic recalibration of the prediction models to account for improvements in the models, changes in agency design and construction strategies, and updates in performance data, this study also developed an automated technique for calibrating the AASHTOWare PMED software performance models. This automated methodology incorporated robust sampling techniques to verify calibrated PMED models. In addition, statistical equivalence testing was incorporated to ensure PMED-predicted performance results tended to agree with the in-situ data. A comparison of results for the AASHTOWare PMED versions 2.5 and 2.6.2.2 showed that most predicted distress values in Kansas remained the same, except for the predicted AC total fatigue cracking, specifically asphalt bottom-up fatigue cracking. For both distress types, slightly higher values were obtained with version 2.6.2.2. Results of three candidate crack tests showed that IDEAL-CT test results can be used as cracking-resistance criterion for mixtures in Kansas. The rehabilitation models were also successfully calibrated for the New England region.
Draft User's Guide for UDOT Mechanistic-empirical Pavement Design
Author: Michael I. Darter
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 136
Book Description
Validation of the new AASHTO Mechanistic-Empirical Pavement Design Guide's (MEPDG) nationally calibrated pavement distress and smoothness prediction models when applied under Utah conditions, and local calibration of the new hot-mix asphalt (HMA) pavement total rutting model, were recently completed as documented in UDOT Research Report No. UT-09.11 Implementation of the Mechanistic-Empirical Pavement Design Guide in Utah: Validation, Calibration, and Development of the UDOT MEPDG User's Guide, dated October 2009. This Draft User's Guide incorporates the findings of the model validation and local calibration report and provides information for use by UDOT's pavement design engineers during trial implementation of the MEPDG. This information includes an overview of the MEPDG procedure, information on installation of the software, guidelines for obtaining all needed inputs, guidance to perform pavement design using the software for new and rehabilitated HMA pavement and jointed plain concrete pavement (JPCP), and pavement design examples for new HMA pavement and new JPCP using the MEPDG software.
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 136
Book Description
Validation of the new AASHTO Mechanistic-Empirical Pavement Design Guide's (MEPDG) nationally calibrated pavement distress and smoothness prediction models when applied under Utah conditions, and local calibration of the new hot-mix asphalt (HMA) pavement total rutting model, were recently completed as documented in UDOT Research Report No. UT-09.11 Implementation of the Mechanistic-Empirical Pavement Design Guide in Utah: Validation, Calibration, and Development of the UDOT MEPDG User's Guide, dated October 2009. This Draft User's Guide incorporates the findings of the model validation and local calibration report and provides information for use by UDOT's pavement design engineers during trial implementation of the MEPDG. This information includes an overview of the MEPDG procedure, information on installation of the software, guidelines for obtaining all needed inputs, guidance to perform pavement design using the software for new and rehabilitated HMA pavement and jointed plain concrete pavement (JPCP), and pavement design examples for new HMA pavement and new JPCP using the MEPDG software.