Author: Ian Buxton
Publisher: Seaforth Publishing
ISBN: 1399031015
Category : History
Languages : en
Pages : 242
Book Description
Heavy gun mountings dominated the design of larger warships, on account of their size, weight, protection and cost. In the 1890s, British gun mountings developed rapidly with new gun technologies (wire winding, cordite) and the rise of the two major ordnance companies, Armstrongs and Vickers, producing large numbers of weapons for the Royal Navy and for worldwide export. But by 1960, aircraft and guided missiles had made the big gun redundant, so the period from 1890s to 1950s covering the two world wars is the most historically significant. The focus of this book is on the larger mountings and those fitted in the larger ships – the massively engineered ‘non transferable’ mountings, whose complexities and associated magazines took up a huge volume of the ship, unlike the smaller calibre ‘transferable’ mountings mostly bolted to the deck. Such mountings could weigh over 1000 tons, take two years to build and make up a quarter of the cost of a battleship. Although they existed in many variants, there were only about forty basic mountings from 4.5in to 18in calibre fitted to the majority of the RN’s larger ships so these take up the bulk of the book. For each, well illustrated handbooks with colored plates were produced, but are largely inaccessible to the public, so about 50 of these highly detailed drawings are reproduced at large scale. The smaller mountings and the guns themselves each have a separate chapter. Although the impact of the book is largely visual, there is an expert account of the design, construction and installation of such mountings, and their manufacturers, supported by a range of internal and close-up photographs. The reference value of the work is enhanced by a comprehensive table of mountings and their characteristics, plus a list of all the mountings made by Vickers of Barrow between 1900 and 1950. Providing easy access to so much rarely seen material, this handsome volume will appeal to modelmakers, ship enthusiasts and technical historians.
British Naval Gun Mountings
Author: Ian Buxton
Publisher: Seaforth Publishing
ISBN: 1399031015
Category : History
Languages : en
Pages : 242
Book Description
Heavy gun mountings dominated the design of larger warships, on account of their size, weight, protection and cost. In the 1890s, British gun mountings developed rapidly with new gun technologies (wire winding, cordite) and the rise of the two major ordnance companies, Armstrongs and Vickers, producing large numbers of weapons for the Royal Navy and for worldwide export. But by 1960, aircraft and guided missiles had made the big gun redundant, so the period from 1890s to 1950s covering the two world wars is the most historically significant. The focus of this book is on the larger mountings and those fitted in the larger ships – the massively engineered ‘non transferable’ mountings, whose complexities and associated magazines took up a huge volume of the ship, unlike the smaller calibre ‘transferable’ mountings mostly bolted to the deck. Such mountings could weigh over 1000 tons, take two years to build and make up a quarter of the cost of a battleship. Although they existed in many variants, there were only about forty basic mountings from 4.5in to 18in calibre fitted to the majority of the RN’s larger ships so these take up the bulk of the book. For each, well illustrated handbooks with colored plates were produced, but are largely inaccessible to the public, so about 50 of these highly detailed drawings are reproduced at large scale. The smaller mountings and the guns themselves each have a separate chapter. Although the impact of the book is largely visual, there is an expert account of the design, construction and installation of such mountings, and their manufacturers, supported by a range of internal and close-up photographs. The reference value of the work is enhanced by a comprehensive table of mountings and their characteristics, plus a list of all the mountings made by Vickers of Barrow between 1900 and 1950. Providing easy access to so much rarely seen material, this handsome volume will appeal to modelmakers, ship enthusiasts and technical historians.
Publisher: Seaforth Publishing
ISBN: 1399031015
Category : History
Languages : en
Pages : 242
Book Description
Heavy gun mountings dominated the design of larger warships, on account of their size, weight, protection and cost. In the 1890s, British gun mountings developed rapidly with new gun technologies (wire winding, cordite) and the rise of the two major ordnance companies, Armstrongs and Vickers, producing large numbers of weapons for the Royal Navy and for worldwide export. But by 1960, aircraft and guided missiles had made the big gun redundant, so the period from 1890s to 1950s covering the two world wars is the most historically significant. The focus of this book is on the larger mountings and those fitted in the larger ships – the massively engineered ‘non transferable’ mountings, whose complexities and associated magazines took up a huge volume of the ship, unlike the smaller calibre ‘transferable’ mountings mostly bolted to the deck. Such mountings could weigh over 1000 tons, take two years to build and make up a quarter of the cost of a battleship. Although they existed in many variants, there were only about forty basic mountings from 4.5in to 18in calibre fitted to the majority of the RN’s larger ships so these take up the bulk of the book. For each, well illustrated handbooks with colored plates were produced, but are largely inaccessible to the public, so about 50 of these highly detailed drawings are reproduced at large scale. The smaller mountings and the guns themselves each have a separate chapter. Although the impact of the book is largely visual, there is an expert account of the design, construction and installation of such mountings, and their manufacturers, supported by a range of internal and close-up photographs. The reference value of the work is enhanced by a comprehensive table of mountings and their characteristics, plus a list of all the mountings made by Vickers of Barrow between 1900 and 1950. Providing easy access to so much rarely seen material, this handsome volume will appeal to modelmakers, ship enthusiasts and technical historians.
British Naval Gun Mountings
Author: Ian Buxton
Publisher: Seaforth Publishing
ISBN: 139903099X
Category : History
Languages : en
Pages : 536
Book Description
Heavy gun mountings dominated the design of larger warships, on account of their size, weight, protection and cost. In the 1890s, British gun mountings developed rapidly with new gun technologies (wire winding, cordite) and the rise of the two major ordnance companies, Armstrongs and Vickers, producing large numbers of weapons for the Royal Navy and for worldwide export. But by 1960, aircraft and guided missiles had made the big gun redundant, so the period from 1890s to 1950s covering the two world wars is the most historically significant. The focus of this book is on the larger mountings and those fitted in the larger ships – the massively engineered ‘non transferable’ mountings, whose complexities and associated magazines took up a huge volume of the ship, unlike the smaller calibre ‘transferable’ mountings mostly bolted to the deck. Such mountings could weigh over 1000 tons, take two years to build and make up a quarter of the cost of a battleship. Although they existed in many variants, there were only about forty basic mountings from 4.5in to 18in calibre fitted to the majority of the RN’s larger ships so these take up the bulk of the book. For each, well illustrated handbooks with colored plates were produced, but are largely inaccessible to the public, so about 50 of these highly detailed drawings are reproduced at large scale. The smaller mountings and the guns themselves each have a separate chapter. Although the impact of the book is largely visual, there is an expert account of the design, construction and installation of such mountings, and their manufacturers, supported by a range of internal and close-up photographs. The reference value of the work is enhanced by a comprehensive table of mountings and their characteristics, plus a list of all the mountings made by Vickers of Barrow between 1900 and 1950. Providing easy access to so much rarely seen material, this handsome volume will appeal to modelmakers, ship enthusiasts and technical historians.
Publisher: Seaforth Publishing
ISBN: 139903099X
Category : History
Languages : en
Pages : 536
Book Description
Heavy gun mountings dominated the design of larger warships, on account of their size, weight, protection and cost. In the 1890s, British gun mountings developed rapidly with new gun technologies (wire winding, cordite) and the rise of the two major ordnance companies, Armstrongs and Vickers, producing large numbers of weapons for the Royal Navy and for worldwide export. But by 1960, aircraft and guided missiles had made the big gun redundant, so the period from 1890s to 1950s covering the two world wars is the most historically significant. The focus of this book is on the larger mountings and those fitted in the larger ships – the massively engineered ‘non transferable’ mountings, whose complexities and associated magazines took up a huge volume of the ship, unlike the smaller calibre ‘transferable’ mountings mostly bolted to the deck. Such mountings could weigh over 1000 tons, take two years to build and make up a quarter of the cost of a battleship. Although they existed in many variants, there were only about forty basic mountings from 4.5in to 18in calibre fitted to the majority of the RN’s larger ships so these take up the bulk of the book. For each, well illustrated handbooks with colored plates were produced, but are largely inaccessible to the public, so about 50 of these highly detailed drawings are reproduced at large scale. The smaller mountings and the guns themselves each have a separate chapter. Although the impact of the book is largely visual, there is an expert account of the design, construction and installation of such mountings, and their manufacturers, supported by a range of internal and close-up photographs. The reference value of the work is enhanced by a comprehensive table of mountings and their characteristics, plus a list of all the mountings made by Vickers of Barrow between 1900 and 1950. Providing easy access to so much rarely seen material, this handsome volume will appeal to modelmakers, ship enthusiasts and technical historians.
British Naval Weapons of World War Two
Author: Norman Friedman
Publisher: Seaforth Publishing
ISBN: 1526777134
Category : History
Languages : en
Pages : 210
Book Description
John Lambert was a renowned naval draughtsman, whose plans were highly valued for their accuracy and detail by modelmakers and enthusiasts. By the time of his death in 2016 he had produced over 850 sheets of drawings, many of which have never been published. These have now been acquired by Seaforth and this is the third of a planned series of albums on selected themes, reproducing complete sheets at a large page size, with an expert commentary and captioning. The initial volumes concentrate on British naval weaponry used in the Second World War, thus completing the project John Lambert was working on when he died. His interest was always focused on smaller warships and his weapons drawings tend to be of open mountings – the kind that present a real challenge to modelmakers – rather than enclosed turret guns, but he also produced drawings of torpedo tubes, underwater weapons, fire-control directors and even some specific armament-related deck fittings. Following the earlier volumes on destroyer and escort armament, this one covers the multitude of weapons carried by Coastal Forces, many of which were improvised, ad hoc or obsolescent, but eventually leading to powerful purpose-designed weaponry. An appendix covers the main deck guns carried by British submarines of this era. The drawings are backed by introductory essays by Norman Friedman, an acknowledged authority on naval ordnance, while a selection of photographs adds to the value of the book as visual reference. Over time, the series will be expanded to make this unique technical archive available in published form, a move certain to be welcomed by warship modellers, enthusiasts and the many fans of John Lambert’s work.
Publisher: Seaforth Publishing
ISBN: 1526777134
Category : History
Languages : en
Pages : 210
Book Description
John Lambert was a renowned naval draughtsman, whose plans were highly valued for their accuracy and detail by modelmakers and enthusiasts. By the time of his death in 2016 he had produced over 850 sheets of drawings, many of which have never been published. These have now been acquired by Seaforth and this is the third of a planned series of albums on selected themes, reproducing complete sheets at a large page size, with an expert commentary and captioning. The initial volumes concentrate on British naval weaponry used in the Second World War, thus completing the project John Lambert was working on when he died. His interest was always focused on smaller warships and his weapons drawings tend to be of open mountings – the kind that present a real challenge to modelmakers – rather than enclosed turret guns, but he also produced drawings of torpedo tubes, underwater weapons, fire-control directors and even some specific armament-related deck fittings. Following the earlier volumes on destroyer and escort armament, this one covers the multitude of weapons carried by Coastal Forces, many of which were improvised, ad hoc or obsolescent, but eventually leading to powerful purpose-designed weaponry. An appendix covers the main deck guns carried by British submarines of this era. The drawings are backed by introductory essays by Norman Friedman, an acknowledged authority on naval ordnance, while a selection of photographs adds to the value of the book as visual reference. Over time, the series will be expanded to make this unique technical archive available in published form, a move certain to be welcomed by warship modellers, enthusiasts and the many fans of John Lambert’s work.
Naval Guns, and Mounting and Working Heavy Guns at Sea. From the Journal of the Royal United Service Institution. Vol. XVI.
Author: William Dawson (Commander.)
Publisher:
ISBN:
Category :
Languages : en
Pages : 106
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 106
Book Description
Naval Weapons of World War One
Author: Norman Friedman
Publisher: Seaforth Publishing
ISBN: 1848321007
Category : History
Languages : en
Pages : 409
Book Description
Although the Great War might be regarded as the heyday of the big-gun at sea, it also saw the maturing of underwater weapons the mine and torpedo as well as the first signs of the future potency of air power. Between 1914 and 1918 weapons development was both rapid and complex, so this book has two functions: on the one hand it details all the guns, torpedoes, mines, aerial bombs and anti-submarine systems employed during that period; but it also seeks to explain the background to their evolution how the weapons were perceived at the time and how they were actually used. This involves a discussion of tactics and emphasises the key enabling technology of fire control and gun mountings. In this respect the book treats the war as a transition from naval weapons which were essentially experimental at its outbreak to a state where they pointed directly to what would be used in World War Two. Based largely on original research, this sophisticated book is more than a catalogue of the weapons, offering insight into some of the most important technical and operational factors influencing the war at sea. In this respect it is more broadly significant than its title might suggest.
Publisher: Seaforth Publishing
ISBN: 1848321007
Category : History
Languages : en
Pages : 409
Book Description
Although the Great War might be regarded as the heyday of the big-gun at sea, it also saw the maturing of underwater weapons the mine and torpedo as well as the first signs of the future potency of air power. Between 1914 and 1918 weapons development was both rapid and complex, so this book has two functions: on the one hand it details all the guns, torpedoes, mines, aerial bombs and anti-submarine systems employed during that period; but it also seeks to explain the background to their evolution how the weapons were perceived at the time and how they were actually used. This involves a discussion of tactics and emphasises the key enabling technology of fire control and gun mountings. In this respect the book treats the war as a transition from naval weapons which were essentially experimental at its outbreak to a state where they pointed directly to what would be used in World War Two. Based largely on original research, this sophisticated book is more than a catalogue of the weapons, offering insight into some of the most important technical and operational factors influencing the war at sea. In this respect it is more broadly significant than its title might suggest.
The Encyclopaedia Britannica: Mun to Pay
Author:
Publisher:
ISBN:
Category : Encyclopedias and dictionaries
Languages : en
Pages : 1052
Book Description
Publisher:
ISBN:
Category : Encyclopedias and dictionaries
Languages : en
Pages : 1052
Book Description
U.S. Naval Weapons
Author: Norman Friedman
Publisher: US Naval Institute Press
ISBN:
Category : History
Languages : en
Pages : 308
Book Description
Publisher: US Naval Institute Press
ISBN:
Category : History
Languages : en
Pages : 308
Book Description
The Bofors Gun
Author: Terry Gander
Publisher: Pen and Sword
ISBN: 1783462027
Category : History
Languages : en
Pages : 277
Book Description
The 40mm Bofors Gun, first produced in the 1930s, has become one of the most famous artillery pieces of all time. It shows no sign of fading from the defence scene even though, in the second decade of the twenty-first century, it performs in many roles that were not contemplated by its original designers. It has also proved to be so versatile that it is now allied to electronic and other technological marvels that were mere pipe dreams only a few years ago. When the Bofors entered the international defence market, its primary quarry, the military aircraft, was still a slow and fragile machine that could be terminally damaged by a single hit from a 40mm projectile. Terry Gander describes this early period in the gun's development and he shows how, despite recent?increases in target speed and other performance parameters, it can still inflict a one-hit kill on almost any aircraft, helicopter?or guided missile. Perhaps the most astonishing aspect of the story is that the fundamentals of today's Bofors guns remain virtually unchanged from the very first examples to come off the Karlskoga production line in Sweden. In all its forms, the Bofors continues to be a sound, reliable and lethal piece of military hardware that has given good service to gunners all over the world.?Terry Gander's comprehensive account of the history of this remarkable weapon over the course of almost eighty years is fascinating?reading and an invaluable work of reference for military historians and artillery specialists alike. It is the definitive work in the field.??As featured on BBC Radio Guernsey.
Publisher: Pen and Sword
ISBN: 1783462027
Category : History
Languages : en
Pages : 277
Book Description
The 40mm Bofors Gun, first produced in the 1930s, has become one of the most famous artillery pieces of all time. It shows no sign of fading from the defence scene even though, in the second decade of the twenty-first century, it performs in many roles that were not contemplated by its original designers. It has also proved to be so versatile that it is now allied to electronic and other technological marvels that were mere pipe dreams only a few years ago. When the Bofors entered the international defence market, its primary quarry, the military aircraft, was still a slow and fragile machine that could be terminally damaged by a single hit from a 40mm projectile. Terry Gander describes this early period in the gun's development and he shows how, despite recent?increases in target speed and other performance parameters, it can still inflict a one-hit kill on almost any aircraft, helicopter?or guided missile. Perhaps the most astonishing aspect of the story is that the fundamentals of today's Bofors guns remain virtually unchanged from the very first examples to come off the Karlskoga production line in Sweden. In all its forms, the Bofors continues to be a sound, reliable and lethal piece of military hardware that has given good service to gunners all over the world.?Terry Gander's comprehensive account of the history of this remarkable weapon over the course of almost eighty years is fascinating?reading and an invaluable work of reference for military historians and artillery specialists alike. It is the definitive work in the field.??As featured on BBC Radio Guernsey.
Brassey's Naval Annual
Author: Royal United Services Institute for Defence Studies
Publisher:
ISBN:
Category : Armed Forces
Languages : en
Pages : 770
Book Description
Publisher:
ISBN:
Category : Armed Forces
Languages : en
Pages : 770
Book Description
United States Naval Institute Proceedings
Author: United States Naval Institute
Publisher:
ISBN:
Category : Naval art and science
Languages : en
Pages : 762
Book Description
Publisher:
ISBN:
Category : Naval art and science
Languages : en
Pages : 762
Book Description