An Experimental Investigation of Natural Convection in a Horizontal Cylinder PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download An Experimental Investigation of Natural Convection in a Horizontal Cylinder PDF full book. Access full book title An Experimental Investigation of Natural Convection in a Horizontal Cylinder by Irving H. Brooks. Download full books in PDF and EPUB format.
Author: Irving H. Brooks
Publisher:
ISBN:
Category :
Languages : en
Pages : 68
Get Book Here
Book Description
The study deals with an experimental investigation into the natural convection inside a horizontal cylinder. The fluid, geometry, and thermal boundary condition were chosen so as to have a high Prandtl number and unit order Grashof number. The thermal boundary condition was established by imposing temperatures at two points, 180 degrees apart, on the circumference of the cylinder. The resulting boundary condition for the full 360 degrees was found experimentally and is presented. The apparatus was constructed so that the entire cylinder could be rotated. This was done so that the diameter containing the two imposed temperatures could vary from being horizontal to being vertical. In this way an arbitrary heating angle was incorporated into the boundary condition. Temperature profiles and streamline patterns were observed at steady state for various values of this heating angle and for various initial conditions. For some cases, velocity profiles were also plotted. It was found that the interior 'core' of fluid was thermally stratified when the diameter containing the two imposed temperatures was horizontal. The flow occurred primarily in the region close to the cylinder wall. The cylinder was rotated so that the diameter containing the two imposed temperatures made an angle with the horizontal. (Author).
Author: Irving H. Brooks
Publisher:
ISBN:
Category :
Languages : en
Pages : 68
Get Book Here
Book Description
The study deals with an experimental investigation into the natural convection inside a horizontal cylinder. The fluid, geometry, and thermal boundary condition were chosen so as to have a high Prandtl number and unit order Grashof number. The thermal boundary condition was established by imposing temperatures at two points, 180 degrees apart, on the circumference of the cylinder. The resulting boundary condition for the full 360 degrees was found experimentally and is presented. The apparatus was constructed so that the entire cylinder could be rotated. This was done so that the diameter containing the two imposed temperatures could vary from being horizontal to being vertical. In this way an arbitrary heating angle was incorporated into the boundary condition. Temperature profiles and streamline patterns were observed at steady state for various values of this heating angle and for various initial conditions. For some cases, velocity profiles were also plotted. It was found that the interior 'core' of fluid was thermally stratified when the diameter containing the two imposed temperatures was horizontal. The flow occurred primarily in the region close to the cylinder wall. The cylinder was rotated so that the diameter containing the two imposed temperatures made an angle with the horizontal. (Author).
Author: Deing Wang
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 140
Get Book Here
Book Description
An experimental investigation was conducted to better understand the heat transfer process with natural convection from an array of uniformly heated horizontal cylinders to mercury. Five assembly geometries were studied, these being the single horizontal cylinder, two cylinders with spacing ratios S/D = 2,3 and 4, (S represents the center-to-center spacing between cylinders of diameter, D), and three cylinders with a single spacing ratio of S/D = 2. All cylinders were arranged in the same vertical plane. A scale analysis was employed to predict the relationship between the average Nusselt number and the Boussinesq number. In the case of the single cylinder good agreement was achieved between scale analysis and experimental results. The Nusselt number is a function of Boussinesq number only in the single cylinder case. These findings were extended to cases with two and three cylinders. Correlations of Nusselt number with different Boussinesq numbers, various ratios of spacing and diameters of cylinders have been established for these multiple cylinder cases.
Author: John A. Kerns
Publisher:
ISBN:
Category : Fluid dynamics
Languages : en
Pages : 268
Get Book Here
Book Description
Author: Enoch IfeanyiChukwu Nwizu
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 172
Get Book Here
Book Description
Author: Ali Savzevari
Publisher:
ISBN:
Category :
Languages : en
Pages : 81
Get Book Here
Book Description
An experimental investigation was conducted to study the natural convection of a high kinematic viscosity oil enclosed in a horizontal cylinder. The circumferential wall of a 5 in. I.D. copper cylinder was heated according to a cosine temperature distribution. The maximum and minimum temperatures on the cylinder wall were chosen for large Prandtl numbers and unit order Grashof numbers. The experimental equipment was so designed that a variety of heating configurations could be investigated, namely, ranging from the heating-from-the-side to the heating-from-below case. For several heating configurations, detailed velocity and temperature measurements were performed over the entire cross section of the midplane between the two ends of the cylinder. The physical nature of the core region and of the boundary layer region were studied in each considered case. Some of the experimental results were compared with the theory, which had been established previously for this problem. (Author).
Author: Sandra K. S. Boetcher
Publisher: Springer
ISBN: 3319081322
Category : Science
Languages : en
Pages : 57
Get Book Here
Book Description
This book presents a concise, yet thorough, reference for all heat transfer coefficient correlations and data for all types of cylinders: vertical, horizontal, and inclined. This book covers all natural convection heat transfer laws for vertical and inclined cylinders and is an excellent resource for engineers working in the area of heat transfer engineering.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Author: Timothy William Martin
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 118
Get Book Here
Book Description
An experimental study has been made of the local natural convective heat transfer coefficient around the circumference of a heated horizontal cylinder oscillating vertically in water. The heat transfer surface consisted of a 1 3/8-inch diameter cylinder with a small test section imbedded in its surface. This enabled data to be taken so that the local and overall values of the heat; transfer coefficient could be determined. The cylinder was oscillated sinusoidally in a tank of distilled water at a frequency of 0 to 25-cps with an amplitude of 0 to 0.100-inch. The temperature difference between the water bath and the test cylinder was held at approximately twenty degrees. Observations of the flow patterns around the cylinder were made using a shadowgraph technique and a dye stream visualization, The local heat transfer coefficient versus position data were taken at six different conditions of frequency and amplitude. These conditions were: (1) stationary, (2) n = 500 rpm, a = 0.100-inch, (3) n = 750 rpm, a = 0.0667-inch, (4) n = 1000 rpm, a = 0.100-inch, (5) n = 1500 rpm, a = 0.0667-inch, and (6) n = 1500 rpm, a = 0.100-inch. The overall cylinder results were similar to the results found by V.H. Swanson and by Martinelli and Boelter in similar work. The maximum increase in the overall cylinder heat transfer rate was of the order of 200 percent. The data for the local heat transfer coefficient showed that the maximum increase in the heat transfer coefficient occurred at the top of the cylinder and was on the order of 290 percent. At the same condition of oscillation the coefficient at the side increased 230 percent while the coefficient at the bottom increased 72 percent. In comparing the shapes of the distributions of local Nusselts number with the shapes Fand, Roos, Cheng, and Kaye found by imposing a sound field on a air-cylinder system, a difference was noted which can be attributed to the difference in the direction of oscillation between the two investigations. In the present investigation the cylinder was oscillated vertically while Fand, Roos, Cheng, and Kaye used a horizontal oscillation of the fluid particles. The resulting differences in the acoustic streaming pattern account for the differences noted in the shapes of the local heat transfer coefficient versus position curves. The shapes did show that the effect of mechanical oscillation and the effect of a sound field on the convective heat transfer rate were similar. A dye stream visualization of the flow pattern indicated Fand, Roos, Cheng, and Kaye were correct when they concluded that the shape of the distribution of Nusselt number was caused by the interaction of a natural convection flow pattern and acoustic streaming. This study sheds some light on the mechanism causing the increase in the natural convection heat transfer coefficient when oscillation is introduced, and it shows the need for more experimental investigation into the distribution of the local heat transfer coefficient around cylinders.
Author: Ian M. O'Gorman
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Author: Thamir R. Al-Alusi
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 448
Get Book Here
Book Description
Convection heat transfer was experimentally investigated for two different geometries. One case had three horizontal cylinders in a vertical plane placed between two vertical walls. The second case had three horizontal cylinders in a vertical plane with only one vertical wall. Several different cylinder center-tocenter spacings were investigated. The wall spacings for the two wall and single wall cases were also varied. The cylinders were placed in a still air medium at atmospheric pressure and were maintained at a constant heat flux. The modified Rayleigh number, based on the diameter of the cylinders, ranged from 6.2 x 104 to 1.2 x 106. A scale analysis was performed to predict the relationship between the Nusselt number and the modified Rayleigh number. A standard finite-difference code was employed to show the temperature distribution and velocity vectors distribution around the cylinders. The results showed that there was a maximum heat transfer from each cylinder at a specific wall-array spacing and a specific center-to-center spacing. Comparisons of heat transfer results with a single free cylinder and a free array of horizontal cylinders were made and discussed. Empirical equations were proposed to predict the effects of the experimental parameters on the heat transfer as expressed by the average Nusselt number of each cylinder or the average Nusselt number of the whole array. Flow visualization was accomplished using laser sheets. The resulting studies showed that the presence of a single wall or the asymmetrical placement of the array between the two walls eliminated the presence of the vortices in the spaces between the cylinders and displaced the stagnation points. The asymmetrical placement of the array between two walls created a reversed current between the two walls.
