Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1134
Book Description
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1134
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1134
Book Description
An Experimental and Theoretical Study of the Ice Accretion Process During Artificial and Natural Icing Conditions
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722936198
Category :
Languages : en
Pages : 136
Book Description
Real-time measurements of ice growth during artificial and natural icing conditions were conducted using an ultrasonic pulse-echo technique. This technique allows ice thickness to be measured with an accuracy of + or - 0.5 mm; in addition, the ultrasonic signal characteristics may be used to detect the presence of liquid on the ice surface and hence discern wet and dry ice growth behavior. Ice growth was measured on the stagnation line of a cylinder exposed to artificial icing conditions in the NASA Lewis Icing Research Tunnel (IRT), and similarly for a cylinder exposed in flight to natural icing conditions. Ice thickness was observed to increase approximately linearly with exposure time during the initial icing period. The ice accretion rate was found to vary with cloud temperature during wet ice growth, and liquid runback from the stagnation region was inferred. A steady-state energy balance model for the icing surface was used to compare heat transfer characteristics for IRT and natural icing conditions. Ultrasonic measurements of wet and dry ice growth observed in the IRT and in flight were compared with icing regimes predicted by a series of heat transfer coefficients. The heat transfer magnitude was generally inferred to be higher for the IRT than for the natural icing conditions encountered in flight. An apparent variation in the heat transfer magnitude was also observed for flights conducted through different natural icing-cloud formations. Kirby, Mark S. and Hansman, R. John Unspecified Center AIRCRAFT HAZARDS; DEPOSITION; FLIGHT TESTS; ICE FORMATION; WATER VAPOR; WIND TUNNEL TESTS; ACCURACY; CLOUDS; HEAT TRANSFER; PHASE TRANSFORMATIONS; SUPERCOOLING; THICKNESS; ULTRASONIC TESTS...
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722936198
Category :
Languages : en
Pages : 136
Book Description
Real-time measurements of ice growth during artificial and natural icing conditions were conducted using an ultrasonic pulse-echo technique. This technique allows ice thickness to be measured with an accuracy of + or - 0.5 mm; in addition, the ultrasonic signal characteristics may be used to detect the presence of liquid on the ice surface and hence discern wet and dry ice growth behavior. Ice growth was measured on the stagnation line of a cylinder exposed to artificial icing conditions in the NASA Lewis Icing Research Tunnel (IRT), and similarly for a cylinder exposed in flight to natural icing conditions. Ice thickness was observed to increase approximately linearly with exposure time during the initial icing period. The ice accretion rate was found to vary with cloud temperature during wet ice growth, and liquid runback from the stagnation region was inferred. A steady-state energy balance model for the icing surface was used to compare heat transfer characteristics for IRT and natural icing conditions. Ultrasonic measurements of wet and dry ice growth observed in the IRT and in flight were compared with icing regimes predicted by a series of heat transfer coefficients. The heat transfer magnitude was generally inferred to be higher for the IRT than for the natural icing conditions encountered in flight. An apparent variation in the heat transfer magnitude was also observed for flights conducted through different natural icing-cloud formations. Kirby, Mark S. and Hansman, R. John Unspecified Center AIRCRAFT HAZARDS; DEPOSITION; FLIGHT TESTS; ICE FORMATION; WATER VAPOR; WIND TUNNEL TESTS; ACCURACY; CLOUDS; HEAT TRANSFER; PHASE TRANSFORMATIONS; SUPERCOOLING; THICKNESS; ULTRASONIC TESTS...
Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1461573912
Category : Science
Languages : en
Pages : 386
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
Publisher: Springer Science & Business Media
ISBN: 1461573912
Category : Science
Languages : en
Pages : 386
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
The Federal Aviation Administration Plan for Research, Engineering, and Development
Author: United States. Federal Aviation Administration
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 274
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 274
Book Description
Analytical Ice Shape Predictions for Flight in Natural Icing Conditions
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 46
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 46
Book Description
Monthly Catalogue, United States Public Documents
Author:
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1430
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1430
Book Description
Monthly Catalog of United States Government Publications
Author:
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1042
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1042
Book Description
Aeronautical Engineering
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 712
Book Description
A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA)
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 712
Book Description
A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA)
NASA SP.
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 700
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 700
Book Description
Government Reports Announcements & Index
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 592
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 592
Book Description