Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1468449192
Category : Science
Languages : en
Pages : 314
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1468449192
Category : Science
Languages : en
Pages : 314
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Publisher: Springer Science & Business Media
ISBN: 1468449192
Category : Science
Languages : en
Pages : 314
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Superpave Mix Design
Author: Asphalt Institute
Publisher:
ISBN: 9781934154175
Category : Asphalt
Languages : en
Pages : 102
Book Description
Publisher:
ISBN: 9781934154175
Category : Asphalt
Languages : en
Pages : 102
Book Description
World Survey of Current Research and Development on Roads and Road Transport
Author: International Road Federation
Publisher:
ISBN:
Category : Highway research
Languages : en
Pages : 748
Book Description
Publisher:
ISBN:
Category : Highway research
Languages : en
Pages : 748
Book Description
Bituminous Mixtures and Pavements VI
Author: A. Nikolaides
Publisher: CRC Press
ISBN: 1315668165
Category : Technology & Engineering
Languages : en
Pages : 884
Book Description
Bituminous Mixtures and Pavements contains 113 accepted papers from the 6th International ConferenceBituminous Mixtures and Pavements (6th ICONFBMP, Thessaloniki, Greece, 10-12 June 2015). The 6th ICONFBMP is organized every four years by the Highway Engineering Laboratory of the Aristotle University of Thessaloniki, Greece, in conjunction with
Publisher: CRC Press
ISBN: 1315668165
Category : Technology & Engineering
Languages : en
Pages : 884
Book Description
Bituminous Mixtures and Pavements contains 113 accepted papers from the 6th International ConferenceBituminous Mixtures and Pavements (6th ICONFBMP, Thessaloniki, Greece, 10-12 June 2015). The 6th ICONFBMP is organized every four years by the Highway Engineering Laboratory of the Aristotle University of Thessaloniki, Greece, in conjunction with
Moisture Damage in Asphalt Concrete
Author: Russell G. Hicks
Publisher: Transportation Research Board
ISBN: 9780309049245
Category : Technology & Engineering
Languages : en
Pages : 104
Book Description
This synthesis will be of interest to pavement designers, construction engineers, maintenance engineers, and others interested in avoiding or limiting moisture damage in asphalt concrete. Information is provided on physical and chemical explanations for moisture damage in asphalt concrete, along with a discussion of current practices and test methods for determining or reducing the susceptibility of various asphalt concrete components and mixtures to such damage. Moisture damage in asphalt concrete is a nationwide problem which often necessitates premature replacement of highway pavement surfaces. This report of the Transportation Research Board describes the underlying physical and chemical phenomena responsible for such damage. Current test methods used to determine the susceptibility of asphalt concretes, or their constituents, to moisture damage are described and evaluated. Additionally, current practices for minimizing the potential for moisture damage are examined.
Publisher: Transportation Research Board
ISBN: 9780309049245
Category : Technology & Engineering
Languages : en
Pages : 104
Book Description
This synthesis will be of interest to pavement designers, construction engineers, maintenance engineers, and others interested in avoiding or limiting moisture damage in asphalt concrete. Information is provided on physical and chemical explanations for moisture damage in asphalt concrete, along with a discussion of current practices and test methods for determining or reducing the susceptibility of various asphalt concrete components and mixtures to such damage. Moisture damage in asphalt concrete is a nationwide problem which often necessitates premature replacement of highway pavement surfaces. This report of the Transportation Research Board describes the underlying physical and chemical phenomena responsible for such damage. Current test methods used to determine the susceptibility of asphalt concretes, or their constituents, to moisture damage are described and evaluated. Additionally, current practices for minimizing the potential for moisture damage are examined.
Street and Highway Manual and Catalog File
Author:
Publisher:
ISBN:
Category : Roads
Languages : en
Pages : 222
Book Description
Publisher:
ISBN:
Category : Roads
Languages : en
Pages : 222
Book Description
Better Roads
Author:
Publisher:
ISBN:
Category : Roads
Languages : en
Pages : 802
Book Description
Publisher:
ISBN:
Category : Roads
Languages : en
Pages : 802
Book Description
HRIS Abstracts
Author: National Research Council (U.S.). Highway Research Board
Publisher:
ISBN:
Category : Highway engineering
Languages : en
Pages : 1056
Book Description
Publisher:
ISBN:
Category : Highway engineering
Languages : en
Pages : 1056
Book Description
The Asphalt Handbook
Author: Asphalt Institute
Publisher:
ISBN: 9781934154274
Category : Asphalt
Languages : en
Pages : 788
Book Description
For more than 70 years, "MS-4" has served the asphalt industry as its primary reference manual. This new, expanded edition showcases the advances in asphalt technology, covering such topics as superpave courses, asphalt binder, quality control, and rehabilitation of concrete pavements with HMA.
Publisher:
ISBN: 9781934154274
Category : Asphalt
Languages : en
Pages : 788
Book Description
For more than 70 years, "MS-4" has served the asphalt industry as its primary reference manual. This new, expanded edition showcases the advances in asphalt technology, covering such topics as superpave courses, asphalt binder, quality control, and rehabilitation of concrete pavements with HMA.
Laboratory Evaluation of Anti-strip Additives in Hot Mix Asphalt
Author: Bradley J. Putnam
Publisher:
ISBN:
Category : Asphalt
Languages : en
Pages : 178
Book Description
The use of hydrated lime or other liquid anti stripping agents (ASA) is the most common method to improve the moisture susceptibility of asphalt mixes. However, most laboratory test conditions used to evaluate the moisture susceptibility of the mixes are only for a short duration of time. This might not be a good representation of the field conditions (i.e., several months or years of service). Thus, a study to evaluate the effects of conditioning the mixes for longer durations was initiated. Also, another problem with the use of the liquid anti stripping agents is their heat storage stability. This report addresses these two issues, by preparing and testing mixtures made with fresh binder for indirect tensile strength after conditioning the samples for 1, 7, 28, 90 and 180 days, and samples prepared from binder stored for three days at 160° C after conditioning them for 1, 28 and 90 days. The results of this study indicated that hydrated lime and the liquid anti stripping agents were equally effective for the mixes used in this research when conditioned beyond one day. In the case of samples prepared from stored binder, there was no significant difference in the effectiveness of hydrated lime and the liquid anti stripping agents even after conditioning for one day. Though it was observed that none of the ASA treatments performed better than others in the case of samples prepared with stored binder, it was also observed that almost all mixes gave significantly similar wet ITS and TSR values as samples prepared from fresh binder.
Publisher:
ISBN:
Category : Asphalt
Languages : en
Pages : 178
Book Description
The use of hydrated lime or other liquid anti stripping agents (ASA) is the most common method to improve the moisture susceptibility of asphalt mixes. However, most laboratory test conditions used to evaluate the moisture susceptibility of the mixes are only for a short duration of time. This might not be a good representation of the field conditions (i.e., several months or years of service). Thus, a study to evaluate the effects of conditioning the mixes for longer durations was initiated. Also, another problem with the use of the liquid anti stripping agents is their heat storage stability. This report addresses these two issues, by preparing and testing mixtures made with fresh binder for indirect tensile strength after conditioning the samples for 1, 7, 28, 90 and 180 days, and samples prepared from binder stored for three days at 160° C after conditioning them for 1, 28 and 90 days. The results of this study indicated that hydrated lime and the liquid anti stripping agents were equally effective for the mixes used in this research when conditioned beyond one day. In the case of samples prepared from stored binder, there was no significant difference in the effectiveness of hydrated lime and the liquid anti stripping agents even after conditioning for one day. Though it was observed that none of the ASA treatments performed better than others in the case of samples prepared with stored binder, it was also observed that almost all mixes gave significantly similar wet ITS and TSR values as samples prepared from fresh binder.