Advanced Materials and Technologies for Micro/Nano-Devices, Sensors and Actuators PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Advanced Materials and Technologies for Micro/Nano-Devices, Sensors and Actuators PDF full book. Access full book title Advanced Materials and Technologies for Micro/Nano-Devices, Sensors and Actuators by Evgeni Gusev. Download full books in PDF and EPUB format.
Author: Evgeni Gusev
Publisher: Springer Science & Business Media
ISBN: 9048138051
Category : Technology & Engineering
Languages : en
Pages : 310
Get Book Here
Book Description
A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.
Author: Evgeni Gusev
Publisher: Springer Science & Business Media
ISBN: 9048138051
Category : Technology & Engineering
Languages : en
Pages : 310
Get Book Here
Book Description
A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.
Author: Evgeni Gusev
Publisher: Springer
ISBN: 9048138078
Category : Technology & Engineering
Languages : en
Pages : 310
Get Book Here
Book Description
A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.
Author: Kenji Uchino
Publisher: Woodhead Publishing
ISBN: 0081012551
Category : Technology & Engineering
Languages : en
Pages : 850
Get Book Here
Book Description
Advanced Piezoelectric Materials: Science and Technology, Second Edition, provides revised, expanded, and updated content suitable for those researching piezoelectric materials or using them to develop new devices in areas such as microelectronics, optical, sound, structural, and biomedical engineering. Three new chapters cover multilayer technologies with base-metal internal electrodes, templated grain growth preparation techniques for manufacturing piezoelectric single crystals, and piezoelectric MEMS technologies. Chapters from the first edition have been revised in order to provide up-to-date, comprehensive coverage of developments in the field. Part One covers the structure and properties of a range of piezoelectric materials. Part Two details advanced manufacturing processes for particular materials and device types, including three new chapters. Finally, Part Three covers materials development for three key applications of piezoelectric materials. Dr. Kenji Uchino is a pioneer in piezoelectric actuators, Professor of Electrical Engineering at Penn State University, and Director of the International Center for Actuators and Transducers. He has authored 550 papers, 54 books and 26 patents in the ceramic actuator area. - Features an overview of manufacturing methods for a wide range of piezoelectric materials - Provides revised, expanded, and updated coverage compared to the first edition, including three new chapters - Suitable for those researching piezoelectric materials or using them to develop new devices in areas such as microelectronics, optical, sound, structural, and biomedical engineering
Author: Yung-cheng Lee
Publisher: World Scientific
ISBN: 9813229373
Category : Technology & Engineering
Languages : en
Pages : 363
Get Book Here
Book Description
MEMS sensors and actuators are enabling components for smartphones, AR/VR, and wearable electronics. MEMS packaging is recognized as one of the most critical activities to design and manufacture reliable MEMS. A unique challenge to MEMS packaging is how to protect moving MEMS devices during manufacturing and operation. With the introduction of wafer level capping and encapsulation processes, this barrier is removed successfully. In addition, MEMS devices should be integrated with their electronic chips with the smallest footprint possible. As a result, 3D packaging is applied to connect the devices vertically for the most effective integration. Such 3D packaging also paves the way for further heterogenous integration of MEMS devices, electronics, and other functional devices.This book consists of chapters written by leaders developing products in a MEMS industrial setting and faculty members conducting research in an academic setting. After an introduction chapter, the practical issues are covered: through-silicon vias (TSVs), vertical interconnects, wafer level packaging, motion sensor-to-CMOS bonding, and use of printed circuit board technology to fabricate MEMS. These chapters are written by leaders developing MEMS products. Then, fundamental issues are discussed, topics including encapsulation of MEMS, heterogenous integration, microfluidics, solder bonding, localized sealing, microsprings, and reliability.
Author: Dimitrios P. Nikolelis
Publisher: Springer
ISBN: 3319289268
Category : Technology & Engineering
Languages : en
Pages : 514
Get Book Here
Book Description
This book offers comprehensive coverage of biomarker/biosensor interactions for the rapid detection of weapons of bioterrorism, as well as current research trends and future developments and applications. It will be useful to researchers in this field who are interested in new developments in the early detection of such. The authors have collected very valuable and, in some aspects indispensable experience in the area i.e. in the development and application of portable biosensors for the detection of potential hazards. Most efforts are centered on the development of immunochemical assays including flow-lateral systems and engineered antibodies and their fragments. In addition, new approaches to the detection of enzyme inhibitors, direct enzymatic and microbial detection of metabolites and nutrients are elaborated. Some realized prototypes and concept devices applicable for the further use as a basis for the cooperation programs are also discussed.There is a particular focus on electrochemical and optical detection systems,including those employing carbon nanotubes, quantum dots and metalnanoparticles. The authors are well-known scientists and most of them are editors of respected international scientific journals. Although recently developed biosensors utilize known principles, the biosensing devices described can significantly shorten the time required for successful detection and enhance efforts in more time-consuming directions, e.g. remote sensing systems and validation in real-sample analysis.The authors describe advances in all stages of biosensor development: theselection of biochemical components, their use in biosensor assembly, detection principles and improvements and applications for real sample assays.
Author: ASM International
Publisher: ASM International
ISBN: 1627080996
Category : Technology & Engineering
Languages : en
Pages : 593
Get Book Here
Book Description
The International Symposium for Testing and Failure Analysis (ISTFA) 2018 is co-located with the International Test Conference (ITC) 2018, October 28 to November 1, in Phoenix, Arizona, USA at the Phoenix Convention Center. The theme for the November 2018 conference is "Failures Worth Analyzing." While technology advances fast and the market demands the latest and the greatest, successful companies strive to stay competitive and remain profitable.
Author: Ghenadii Korotcenkov
Publisher: CRC Press
ISBN: 1351056492
Category : Science
Languages : en
Pages : 503
Get Book Here
Book Description
Because of unique water properties, humidity affects materials and many living organisms, including humans. Humidity control is important in various fields, from production management to creating a comfortable living environment. The range of materials that can be used in the development of humidity sensors is very broad, and the third volume of the Handbook of Humidity Measurement offers an analysis on various humidity-sensitive materials and sensor technologies used in the fabrication of humidity sensors and methods acceptable for their testing. Additional features include: numerous strategies for the fabrication and characterization of humidity-sensitive materials and sensing structures used in sensor applications, methods and properties to develop smaller, cheaper, more robust, and accurate devices with better sensitivity and stability, a guide to sensor selection and an overview of the humidity sensor market, and new technology solutions for integration, miniaturization, and specificity of the humidity sensor calibration. Handbook of Humidity Measurement, Volume 3: Sensing Materials and Technologies provides valuable information for practicing engineers, measurement experts, laboratory technicians, project managers in industries and national laboratories, and university students and professors interested in solutions to humidity measurement tasks. Despite the fact that this book is devoted to the humidity sensors, it can be used as a basis for understanding fundamentals of any gas sensor operation and development.
Author: Zhuoqing Yang
Publisher: Springer Nature
ISBN: 303079749X
Category : Technology & Engineering
Languages : en
Pages : 312
Get Book Here
Book Description
This book begins by introducing new and unique fabrication, micromachining, and integration manufacturing methods for MEMS (Micro-Electro-Mechanical Systems) and NEMS (Nano-Electro-Mechanical Systems) devices, as well as novel nanomaterials for sensor fabrications. The second section focuses on novel sensors based on these emerging MEMS/NEMS fabrication methods, and their related applications in industrial, biomedical, and environmental monitoring fields, which makes up the sensing layer (or perception layer) in IoT architecture. This authoritative guide offers graduate students, postgraduates, researchers, and practicing engineers with state-of-the-art processes and cutting-edge technologies on MEMS /NEMS, micro- and nanomachining, and microsensors, addressing progress in the field and prospects for future development. Presents latest international research on MEMS/NEMS fabrication technologies and novel micro/nano sensors; Covers a broad spectrum of sensor applications; Written by leading experts in the field.
Author: Mengdi Han
Publisher: John Wiley & Sons
ISBN: 3527820140
Category : Technology & Engineering
Languages : en
Pages : 428
Get Book Here
Book Description
The book starts with the fundamentals of triboelectric nanogenerators (TENGs), and continues through to fabrication technologies to achieve flexible and stretchable. Then self-powered flexible microsystems are introduced and application examples are presented, including TENG-based active sensors, TENG-powered actuators, artificial intelligence and integrated systems.
Author: Rainer Waser
Publisher: John Wiley & Sons
ISBN: 3527409270
Category : Technology & Engineering
Languages : en
Pages : 1041
Get Book Here
Book Description
Fachlich auf höchstem Niveau, visuell überzeugend und durchgängig farbig illustriert: Das ist die neue Auflage der praxisbewährten Einführung in spezialisierte elektronische Materialien und Bauelemente aus der Informationstechnologie. Über ein Drittel des Inhalts ist neu, alle anderen Beiträge wurden gründlich überarbeitet und aktualisiert.
