Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883941599
Category : Technology & Engineering
Languages : en
Pages : 48
Get Book Here
Book Description
The fib has two major missions now. One is to work toward the publication of the Model Code 2020, and the other is to respond to the global movement toward carbon neutrality. While the former is steadily progressing toward completion, the latter will require significant efforts for generations to come. As we all know, cement, the primary material for concrete, is a sector that accounts for 8.5% of the world’s CO2 emissions. And the structural concrete that fib handles consume 60% of that. In other words, we need to know the reality that our structural concrete is emitting 5% of the world’s CO2. From now on, fib members, suppliers, designers, builders, owner’s engineers, and academic researchers will be asked how to solve this difficult problem. In general, most of the CO2 emissions in the life cycle of structural concrete come from the production stage of materials and the use stage after construction, i.e. A1 to A3 and B1 to B5 processes as defined in EN15978. Cement and steel sectors, which are the main materials for structural concrete, are expected to take various measures to achieve zero carbon in their respective sectors by 2050. Until then, we must deal with the transition with our low carbon technologies. Regarding the production stage, the fib has recently launched TG4.8 “Low carbon concrete”. And the latest low carbon technologies will be discussed there. On the other hand, in the use stage, there is very little data on the relationship between durability and intervention and maintenance so far. The data accumulation here is the work of the fib, a group of various experts on structural concrete. Through-life management using highly durable structures and precise monitoring will enable to realize minimum maintenance in the use stage and to minimize CO2 emissions. Furthermore, it is also possible to contribute to the reduction of CO2 emissions in the further stage after the first cycle by responding to the circular economy, that is, deconstruction (C), reuse, and recycle (D). However, the technology in this field is still in its infancy, and further research and development is expected in the future. As described above, structural concrete can be carbon neutral in all aspects of its conception, and it can make a significant contribution when it is realized. The fib will have to address these issues in the future. Of course, it will not be easy, and it will take time. However, if we do not continue our efforts as the only international academic society on structural concrete in the world to achieve carbon neutrality, the significance of our very existence may be questioned. Long before Portland cement was invented, Roman concrete, made of volcanic ash and other materials, was the ultimate low-carbon material, and is still in use 2’000 years later because of its non-reinforced structure and lack of deterioration factors. Reinforced concrete, which made it possible to apply concrete to structures other than arches and domes, is only 150 years old. Prestressed concrete is even younger, with only 80 years of history. Now that we think about it, we realize that Roman concrete, which is non-reinforced low carbon concrete, is one of the examples of problem solving that we are trying to achieve. We have new materials, such as coated reinforcement, FRP, and fiber reinforced concrete, which can be used in any structural form. To overcome this challenge with all our wisdom would be to live up to the feat the Romans accomplished 2’000 years ago. Realizing highly durable and elegant structures with low-carbon concrete is the key to meet the demands of the world in the future. I hope you will enjoy reading this AOS brochure showing the Outstanding Concrete Structures Awards at the fib 2022 Congress in Oslo. And I also hope you will find some clues for the challenges we are facing.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883941270
Category : Technology & Engineering
Languages : en
Pages : 44
Get Book Here
Book Description
The fib Awards for Outstanding Concrete Structures are attributed every four years at the fib Congress, with the goal of enhancing the international recognition of concrete structures that demonstrate the versatility of concrete as a structural medium. The award consists of a bronze plaque to be displayed on the structure, and certificates presented to the main parties responsible for the work. Applications are invited by the fib secretariat via the National Member Groups. Information on the competition is also made available on the fib’s website, and in the newsletter fib-news published in Structural Concrete. The submitted structures must have been completed during the four years prior to the year of the Congress at which the awards are attributed. The jury may accept an older structure, completed one or two years before, provided that it was not already submitted for the previous award attribution (Mumbai, 2014). The submitted structures must also have the support of an fib Head of Delegation or National Member Group Secretary in order to confirm the authenticity of the indicated authors. Entries consist of the completed entry form, three to five representative photos of the whole structure and/or any important details or plans, and short summary texts explaining: - the history of the project; - description of the structure; - particularities of its realisation (difficulties encountered, special solutions found, etc.). A jury designated by the Presidium selects the winners. The awards are attributed in two categories, Civil Engineering Structures (including bridges) and Buildings. Two or three ‘Winners’ and two to four ‘Special Mention’ recipients are selected in each category, depending on the number of entries received. The jury takes into account criteria such as: - design aspects, including aesthetics and design detailing; - construction practice and quality of work; - environmental aspects of the design and its construction; - durability and sustainability aspects; - significance of the contribution made by the entry to the development and improvement of concrete construction. The decisions of the jury are definitive and cannot be challenged. They are unveiled at a special ceremony during the fib Congress in Melbourne.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883941610
Category : Technology & Engineering
Languages : en
Pages : 461
Get Book Here
Book Description
Fibre Reinforced Concrete (FRC) is a composite material characterized by an enhanced post-cracking tensile residual strength, due to the capacity of fibres to bridge the crack faces by means of pull-out mechanism. Due to a better knowledge of FRC and the recent developments worldwide of guidelines for structural design, the fib Special Activity Group 5, who prepared the new fib Model Code, decided to introduce some sections on new materials and in particular on FRC structural design. At that time, working Groups TG 8.3 (“Fibre reinforced concrete”) and TG 8.6 (“Ultra high performance fibre reinforced concrete”) of fib prepared these sections of the new fib Model Code concerning FRC design rules for providing a guidance to engineers to properly and safely design FRC structural elements, both at serviceability and at ultimate limit states, based on the state-of-the-art knowledge. This bulletin was written with the aim to share the main framework used by the two groups to introduce these two sections and to describe the many aspects already known, but not yet introduced in the Model Code. Even though the basic principles introduced in the two sections are mainly obtained from research on steel fibre reinforced concrete, the Model Code is open to every type of fibres, following a performance-based design approach. The bulletin represents a wide effort made by the people of the Task Group 4.1 and 4.2 to trace the knowledge on FRC and aims to be helpful for structural designers when using this new material in the practice.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883941637
Category : Technology & Engineering
Languages : en
Pages : 326
Get Book Here
Book Description
Structural behavior of reinforced concrete elements strongly depends on the interaction between the reinforcing bars and the surrounding concrete, which is generally referred as “bond in concrete”. In service conditions, the reinforcement-to-concrete bond governs deformability through the tension stiffening of concrete surrounding the bar as well the crack development and crack width. At Ultimate Limit State, bond governs anchorage and lap splices behavior as well as structural ductility. When plain (smooth) bars were used, the steel-to-concrete bond was mainly associated with “chemical adhesion/friction” that is related to the surface roughness of the rebar. As steel strengths increased the need to enhance interaction between steel and the surrounding concrete was recognized, and square twisted rebars, indented rebars or, later on, ribbed rebars came into the market, the latter being the type of deformed bar most commonly adopted since the 1960/70s. When ribbed rebars became widely used, several research studies started worldwide for better understanding the interaction between ribs and the surrounding concrete. Researchers evidenced the development of micro-cracks (due to the wedge action of the ribs) towards the external face of the structural element. If confinement is provided by the concrete cover, by transverse reinforcement or by an external transverse pressure, the full-anchorage capacity is guaranteed and a pull-out failure occurs, with crushing of concrete between the ribs. On the contrary, with lesser confining action, a splitting failure of bond occurs; the latter may provoke a brittle failure of the lap splice or, in some cases, of anchorages. However, after many years of research studies on bond-related topics, there are still several open issues. In fact, new materials entered into the market, as concrete with recycled aggregates or fibre reinforced concrete; the latter, having a kind of distributed reinforcement into the matrix (the fibres), provides a better confinement to the wedge action of the ribs. In addition, concrete and steel strength continuously increased over the years, causing changes in the bond behavior due to differences in mechanical properties of materials but also to the different concrete composition at the interface with the steel rebar causing a different bond behavior. Moreover, the lower water/cement ratio of these high-strength concrete makes the bleeding phenomena less evident, changing the concrete porosity in the upper layers of the structural element and thus making the current casting position parameters no-longer reliable. Finally, concrete with recycled aggregates are becoming more important in a market that is looking forward to a circular economy. As such, all the experimental results and database that allowed the calibration of bond rules now present in building codes for conventional concrete, may be not be representative of these new types of materials nowadays adopted in practice. Furthermore, after more than 50 years of service life, structural elements may not satisfy the current safety requirements for several reasons, including material degradation (with particular reference to steel corrosion) or increased loads, by also considering the seismic actions that were non considered by building codes at the time of the original design. The structural assessment of existing structures requires proper conceptual models and new approaches for evaluating the reliability of existing structures by also considering the remaining expected service life. In addition, specific rules for older materials, as plain smooth bars, should be revised for a better assessment of old structures. Last, but not least, interventions in existing structures may require new technologies now available such as post-installed rebars. While many advances have been achieved, there remain areas where a better understanding of bond and its mechanisms are required, and where further work is required to incorporate this understanding into safe and economic rules to guide construction and maintenance of existing infrastructures. These aspects were widely discussed within the technical community, particularly in the fib Task Group 2.5 and in the ACI 408 Committee dealing with bond and anchorage issues. Furthermore, special opportunities for discussing bond developments were represented by the International Conferences on ‘Bond in Concrete’ held each decade since 1982 as well as by joint workshops organized by fib TG2.5 and ACI 408. Within this technical collaboration, this Bulletin was conceived, and, thus, it collects selected papers presented at the joint fib-ACI Convention Session on Bond in Concrete held in Detroit (USA) in 2017. The bulletin is based on four main Sections concerning: - General aspects of bond - Anchorages and laps of bars and prestressing tendons - Bond under severe conditions - Degradation of bond for corrosion - Bond in new types of concrete The main aim of the Bulletin is to shed some new lights on the advances in understanding and application of bond related issues achieved over the last few years, and identify the challenges and priorities to be addressed in the next years. Another important aspect of the bulletin is to provide practical information from research findings.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883941572
Category : Technology & Engineering
Languages : en
Pages : 338
Get Book Here
Book Description
The idea of preparing a technical document for the repairs and interventions upon concrete structures goes back to the former fib COM 5: Structural Service Life Aspects, being the goal of the then TG 5.9. After a long period of reduced activity, and taking into account the reorganization of fib commissions that meanwhile took place, on June 2017 a different approach was proposed to push forward the task of TG 8.1 (formerly TG 5.9). The (new) goal of TG 8.1 was to deliver a ‘how-to-do’ guide, gathering together protection, repair, and strengthening techniques for concrete structures. Chapters are intended to provide both guidelines and case-studies, serving as support to the application of fib MC 2020 pre-normative specifications. Each chapter was written by an editorial team comprising desirably at least a researcher, a designer and a contractor. Templates have been prepared in order to harmonize the contents and the presentation of the different methods. Following the writing process, chapters were reviewed by experts and, after amendments by the authors, they underwent a second review process by COM 8 and TG 3.4 members, as well as by different practitioners. For each protection, repair and strengthening method addressed in this guide, readers have a description of when to adopt it, which materials and systems are required, which techniques are available, and what kind of equipment is needed. It then presents a summary of stakeholders’ roles and qualifications, design guidelines referring to most relevant codes and references, the intervention procedure, quality control measures and monitoring and maintenance activities. Due to the extent of the guide, it was decided to publish it as bulletin 102, addressing protection and repair methods, and bulletin 103, addressing strengthening methods. We would like to thank the authors, reviewers and members of COM 8 and TG 3.4 for their work in developing this fib Bulletin, which we hope will be useful for professionals working in the field of existing concrete structures, especially those concerned with life-cycle management and conservation activities. As noted above, this Bulletin is also intended to act as a background and supporting document to the next edition of the fib Model Code for Concrete Structures, which is currently under development under the auspices of TG10.1 with the working title of ‘fib Model Code 2020’.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883941556
Category : Technology & Engineering
Languages : en
Pages : 313
Get Book Here
Book Description
The idea of preparing a technical document for the repairs and interventions upon concrete structures goes back to the former fib COM5: Structural Service Life Aspects, being the goal of the then TG5.9. After a long period of reduced activity, and taking into account the reorganization of fib commissions that meanwhile took place, on June 2017 a different approach was proposed to push forward the task of TG8.1 (formerly TG5.9). The (new) goal of TG 8.1 was to deliver a ‘how-to-do’ guide, gathering together protection, repair, and strengthening techniques for concrete structures. Chapters are intended to provide both guidelines and case-studies, serving as support to the application of fib MC2020 pre-normative specifications. Each chapter was written by an editorial team comprising desirably at least a researcher, a designer and a contractor. Templates have been prepared in order to harmonize the contents and the presentation of the different methods. Following the writing process, chapters were reviewed by experts and, after amendments by the authors, they underwent a second review process by COM8 and TG3.4 members, as well as by different practitioners. For each protection, repair and strengthening method addressed in this guide, readers have a description of when to adopt it, which materials and systems are required, which techniques are available, and what kind of equipment is needed. It then presents a summary of stakeholders’ roles and qualifications, design guidelines referring to most relevant codes and references, the intervention procedure, quality control measures and monitoring and maintenance activities. Due to the extent of the guide, it was decided to publish it as bulletin 102, addressing protection and repair methods, and bulletin 103, addressing strengthening methods. We would like to thank the authors, reviewers and members of COM8 and TG3.4 for their work in developing this fib Bulletin, which we hope will be useful for professionals working in the field of existing concrete structures, especially those concerned with life-cycle management and conservation activities. As noted above, this Bulletin is also intended to act as a background and supporting document to the next edition of the fib Model Code for Concrete Structures, which is currently under development under the auspices of TG10.1 with the working title of "fib Model Code 2020".
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
ISBN: 9782883940741
Category : Technology & Engineering
Languages : en
Pages : 128
Get Book Here
Book Description
fib Bulletin 34 addresses Service Life Design (SLD) for plain concrete, reinforced concrete and pre-stressed concrete structures, with a special focus on design provisions for managing the adverse effects of degradation. Its objective is to identify agreed durability related models and to prepare the framework for standardization of performance based design approaches. Four different options for SLD are given: - a full probabilistic approach, - a semi probabilistic approach (partial factor design), - deemed to satisfy rules, - avoidance of deterioration. The service life design approaches described in this document may be applied for the design of new structures, for updating the service life design if the structure exists and real material properties and/or the interaction of environment and structure can be measured (real concrete covers, carbonation depths), and for calculating residual service life. The bulletin is divided into five chapters: 1. General 2. Basis of design 3. Verification of Service Life Design 4. Execution and its quality management 5. Maintenance and condition control It also includes four informative annexes, which give background information and examples of procedures and deterioration models for the application in SLD. The format of Bulletin 34 follows the CEB-FIP tradition for Model Codes: the main provisions are given on the right-hand side of the page, and on the left-hand side, the comments. Note: An Italian translation of Bulletin 34 is also available; contact us for further details.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883941327
Category : Technology & Engineering
Languages : en
Pages : 242
Get Book Here
Book Description
In December 1996, CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in June 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. Finally, as a result of the restructuring of fib’s Commissions and Task Groups at the end of 2014, the Task Group became fib T5.1 FRP Reinforcement for concrete structures, chaired by Stijn Matthys at Ghent University, in Commission 5 Reinforcements. The work of former TG 9.3 and current T5.1 was performed by two working parties (WP), one of which is “Externally Applied Reinforcement” (EAR), which produced fib bulletin 14 “Externally bonded FRP reinforcement for RC structures” in July 2001. Following a number of years of relatively slow activity, the WP on externally applied reinforcement was reactivated and started working on an update of bulletin 14. The result of this work is summarised in the present technical report, which aims to give design guidelines on the use of externally applied FRP reinforcement (both externally bonded and near-surface mounted) for concrete structures. An attempt has been made to present some of the topics in a Eurocode-compatible format, so that the material covered may form the basis for the introduction of composites in the next version of Eurocode 2 and for the updating of the text on seismic retrofitting with composites in the next version of Eurocode 8. All persons who participated in the preparation of this Bulletin are mentioned in the copyright page. Further acknowledgements are due to Josée Bastien (Canada), Hans Rudolf Ganz (Switzerland) and Luc Taerwe (Belgium) for revision of the document. To all members of the working party on externally applied reinforcement our sincere thanks are expressed for the high quality and extensive work brought in on a voluntary basis.
Author: James Grierson MacGregor
Publisher: Prentice Hall
ISBN: 9780136139850
Category : Reinforced concrete
Languages : en
Pages : 939
Get Book Here
Book Description
Based on the 1995 edition of the American Concrete Institute Building Code, this text explains the theory and practice of reinforced concrete design in a systematic and clear fashion, with an abundance of step-by-step worked examples, illustrations, and photographs. The focus is on preparing students to make the many judgment decisions required in reinforced concrete design, and reflects the author's experience as both a teacher of reinforced concrete design and as a member of various code committees. This edition provides new, revised and expanded coverage of the following topics: core testing and durability; shrinkage and creep; bases the maximum steel ratio and the value of the factor on Appendix B of ACI318-95; composite concrete beams; strut-and-tie models; dapped ends and T-beam flanges. It also expands the discussion of STMs and adds new examples in SI units.
Author: Jiřʹi Strʹaskʹy
Publisher:
ISBN: 9780727763860
Category : Bridges
Languages : en
Pages : 248
Get Book Here
Book Description
"Designing and Constructing Prestressed Bridges shows how designs using prestressing methods can be utilised in the building of bridge structures. Prestressed bridges can be used in a variety of locations and styles and it can often be difficult to understand the intricacies of the design. This book solves this concern by discussing the aspects of bridge design in order to find the most appropriate solution. The book focuses on troubleshooting the problems that are connected with finding the correct structural solution of bridges, the methods of their construction and the corresponding arrangement of prestressing steel."--Publisher's website.
