Wood Modification PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Wood Modification PDF full book. Access full book title Wood Modification by Callum A. S. Hill. Download full books in PDF and EPUB format.
Author: Callum A. S. Hill
Publisher: John Wiley & Sons
ISBN: 047002173X
Category : Science
Languages : en
Pages : 260
Get Book Here
Book Description
This book is exclusively concerned with wood modification, although many of these processes are generic and can be applied to other lignocellulosic materials. There have been many rapid developments in wood modification over the past decade and, in particular, there has been considerable progress made in the commercialisation of technologies. Topics covered include: The use of timber in the 21st century Modifying the properties of wood Chemical modification of wood: Acetic Anhydride Modification and reaction with other chemicals Thermal modification of wood Surface modification Impregnation modification Commercialisation of wood modification Environmental consideration and future developments This is the first time that a book has covered all wood modification technologies in one text. Although the book covers the main research developments in wood modification, it also puts wood modification into context and additionally deals with aspects of commercialisation and environmental impact. This book is very timely, because wood modification is undergoing huge developments at the present time, driven in part by environmental concerns regarding the use of wood treated with certain preservatives. There has been considerable commercial interest shown in wood modification over the past decade, with products based upon thermal modification, and furfurylation now being actively being marketed. The next few years will see the commercialisation of acetylation and impregnation modification. This is a new industry, but one that has enormous potential. This book will prove useful to all those with an interest in wood modification including researchers, technologists and professionals working in wood science and timber engineering, wood preservation, and well as professionals in the paper and pulp industries, and those with an interest in the development of renewable materials.
Author: Callum A. S. Hill
Publisher: John Wiley & Sons
ISBN: 047002173X
Category : Science
Languages : en
Pages : 260
Get Book Here
Book Description
This book is exclusively concerned with wood modification, although many of these processes are generic and can be applied to other lignocellulosic materials. There have been many rapid developments in wood modification over the past decade and, in particular, there has been considerable progress made in the commercialisation of technologies. Topics covered include: The use of timber in the 21st century Modifying the properties of wood Chemical modification of wood: Acetic Anhydride Modification and reaction with other chemicals Thermal modification of wood Surface modification Impregnation modification Commercialisation of wood modification Environmental consideration and future developments This is the first time that a book has covered all wood modification technologies in one text. Although the book covers the main research developments in wood modification, it also puts wood modification into context and additionally deals with aspects of commercialisation and environmental impact. This book is very timely, because wood modification is undergoing huge developments at the present time, driven in part by environmental concerns regarding the use of wood treated with certain preservatives. There has been considerable commercial interest shown in wood modification over the past decade, with products based upon thermal modification, and furfurylation now being actively being marketed. The next few years will see the commercialisation of acetylation and impregnation modification. This is a new industry, but one that has enormous potential. This book will prove useful to all those with an interest in wood modification including researchers, technologists and professionals working in wood science and timber engineering, wood preservation, and well as professionals in the paper and pulp industries, and those with an interest in the development of renewable materials.
Author: Dick Sandberg
Publisher: CRC Press
ISBN: 1351028200
Category : Nature
Languages : en
Pages : 765
Get Book Here
Book Description
The market for durable products using modified wood has increased substantially during the last few years. This is partly because of the restriction on the use of toxic preservatives due to environmental concerns, and to lower maintenance cost and time. Furthermore, as sustainability becomes a greater concern, the environmental impact of construction and interior materials is factored in planning by considering the whole life cycle and embodied energy of the materials used. Wood is modified to improve its intrinsic properties, enhance the range of applications of timber, and to acquire the form and functionality desired by engineers without calling the environmental friendliness into question. Wood modification processes are at various stages of development, and the challenges faced in scaling up to industrial applications differ. The aim of this book is to put together the key elements of the changes of wood constituents and the related changes in wood properties of modified wood. Further, a selection of the principal technologies implemented in wood modification are presented. This work is intended for researchers, professionals of timber construction, as well as students studying the science of materials, civil engineering and architecture. This work is not exhaustive, but intends to deliver an outline of the scientific disciplines necessary to apprehend the technologies of wood modification and its behavior during treatment, as well as during its use.
Author: Dennis Jones
Publisher: Firenze University Press
ISBN: 8864539700
Category : Biography & Autobiography
Languages : en
Pages : 127
Get Book Here
Book Description
This report is a result of a questionnaire and subsequent collation of data, which outlines the current status of wood modification across Europe in terms of national inventories and groups that have reported current activity in the respective research areas covered in this report.
Author: Dick Sandberg
Publisher: CRC Press
ISBN: 1351028219
Category : Nature
Languages : en
Pages : 442
Get Book Here
Book Description
Describes how to Improvement of wood products Describes Sustainable development Covers Environmental industrial processing
Author: Tor P. Schultz
Publisher: ACS Symposium
ISBN: 9780841230040
Category : Medical
Languages : en
Pages : 0
Get Book Here
Book Description
Wood and other structural lignocellulose biomaterials are renewable resources that provide sustainable products that require considerably less energy to manufacture into useable products than other alternatives produced from nonrenewable resources. However, these materials are readily biodegradable and as such must be protected if they are to be used in adverse environments. Consequently, their protection through chemical and nonchemical means plays a vital role in the satisfactory utilization of many products. This publication represents the third ACS book by the three co-editors in a series addressing scientific and practical aspects of biodeterioration and protection of lignocellulose materials. The objective of this third book diverges to some extent from the prior texts, in that it provides an overall view of our current understanding of the microbial and thermal degradation of plant biomass along with new developments in the rapidly changing field of wood protection. The latter is particularly important in light of dramatic changes in copper-based wood preservative systems that are used extensively to treat wood for residential construction, and in the commercial development of lignocellulose modification processes that protect bio-based materials without the addition of biocides. These changes, along with an update on new organic wood preservative systems, factors influencing wood biodeterioration above ground and in soil contact, wood treatment processes, registration and approval processes, applications of molecular biology in wood protection research, and the conversion of biomass into high value carbon products and worldwide trends in wood protection, are covered in this latest ACS book. The individual chapters were authored by a world-class group of academic and industrial scientists in order to provide a state-of-the-art review and global perspective of this rapidly changing field and reviewed by internationally recognized scientist
Author: Alireza Bastani
Publisher: Cuvillier Verlag
ISBN: 3736982895
Category : Science
Languages : en
Pages : 153
Get Book Here
Book Description
This study investigates the bonding properties of modified wood by considering three different aspects: water related characteristics, mechanical performance and optical (fluorescence microscopy and X-ray micro-computed tomography) observation of adhesive penetration into modified wood structure. In recent years, the new wood modifications have become more commercially available in the market for both exterior and interior applications due to improved properties that modification can bring to the wood e.g. the improved biological durability, dimensional stability, hardness and weathering resistance of the wood as well as the environmentally friendly nature of the wood modification processes (Militz and Hill 2005). Besides these advantages, modification can affect some technological aspects of the wood such as its bonding performance. For example, it can alter the strength of adhesion as a result of changes in chemical, physical and structural characteristics of the wood. For example, the less polar and less porous modified wood surfaces can result in reduced adhesion due to formation of less free OH groups for bonding leading to poorer adhesive wetting of the wood surface and weaker chemical bonds between the two adherents (Hunt et al. 2007). As modified wood becomes a more demanded material for different applications, there is a need to study its bonding performance where the challenge is to bond different modified materials as their physical and chemical characteristics are substantially changed by modification. In this thesis, measurements of capillary water uptake, contact angle and surface energy were used to determine the water related properties and hydrophobic behavior of furfurylated (FA40 and FA70, which represent 65 and 75 % WPGs) and N-methylol melamine (NMM) (10, 20 and 30%) modified Scots pine and thermally treated Scots pine and beech (modified through an industrial scale vacuum press dewatering method at 195 and 210 °C). The capillary water uptake results indicated a considerable reduction of water uptake for all modifications in all directions both after short (24 h) and long contact times (168, 336 h). Contact angle measurement data revealed an increased hydrophobicity of modified wood. However, some exceptions were observed, mainly for thermally treated wood. Modifications provided radial and tangential surfaces with a non-polar character. Penetration of adhesives into the wood structure plays an important role in the production of glued wood-based panels and products by affecting the bond quality (Frihart 2005, Kamke and Lee 2007). The gross penetration of emulsion polymer isocyanate (EPI), polyurethane (PU) and polyvinyl acetate (PVAc) adhesives into modified wood, both with and without pressure, were determined by using fluorescence microscopy based on measurements of effective (EP) and maximum penetration (MP). Without application of pressure, the EP of EPI adhesive reduced after NMM modification and furfurylation (FA70) and also PU adhesive after NMM modification while the EP of PVAc adhesive increased into furfurylated and NMM modified (10 and 20%) wood. For thermally treated Scots pine, increasing the treatment temperature improved EP of all adhesives. Among used adhesives, PU penetrated much deeper into thermally treated wood for both treatment temperatures. Comparison of penetration of adhesive with and without pressure revealed that with the exception of EP of PU and EPI adhesives into NMM-modified wood and PVAc into thermally treated beech at 195°C, application of pressure led to rather different results as compared to the EP data when no pressure was applied. Visual observation and analysis of fluorescence microscopy photomicrographs provided more detailed information on modality of penetration. Due to the large and deep penetration of PU adhesive into thermally treated Scots pine observed in both studies (with and without pressure), the 3D pattern of penetration of this adhesive was obtained by X-ray micro- computed tomography indicating the pathways which were used by this adhesive for penetration. In another study, the bonding shear strength of the same modified wood materials glued with the same adhesives was also investigated. For all adhesives used, the shear strength significantly reduced after furfurylation and NMM modification of Scots pine samples, mainly due to the brittle nature of the wood after modification rather to the failure of the bondline. Bonding strength of both Scots pine and beech was also negatively affected by thermal modification and the bondline was found to be the weakest link in thermally modified wood. The EP of adhesives and the bondline thickness did not relate to the shear strength of all modified wood materials. It was indicated that the lower shear strength of modified wood could be attributed to other factors, such as the decreased chemical bonding or mechanical interlocking of adhesives, and the reduced strength of brittle modified wood substrate. The effect of two important bonding variables, wood moisture content and open assembly time on penetration of PU adhesive into thermally modified wood (195 and 210 °C) was also studied. The equilibrium moisture content (EMC) level of 8.6% was found to be the optimum for an effective penetration of PU adhesive in thermally modified Scots pine treated at 195°C. In most of the cases, penetration of PU adhesive did not change significantly by increasing the open assembly time, which suggested using a shorter open assembly time of 15 min than 30 min for bonding of thermally modified Scots pine with PU adhesive, in order to save time and reducing the production costs. For samples treated at both treatment temperatures and after shorter open assembly time, the highest MP values observed at moderate EMC levels of 8.6 and 8.2% and the lowest at the higher EMC levels of 13.2 and 12.5%. In another study, the effect of phenol formaldehyde (PF) treatment on bonding performance of beech glued with PVAc and phenol resorcinol formaldehyde (PRF) adhesives was also investigated. The results of both dry and wet conditions indicated higher shear strength for samples bonded with PRF than PVAc. With the exception of 25% PF treated wood bonded with PVAc, the PF modified wood can be glued with both adhesives satisfactorily under dry condition, while under wet condition only the 25% PF modified samples bonded with PRF provided acceptable bonding. For both adhesive systems, PF modification caused a reduction of adhesive penetration into wood structure, especially in the case of higher load treatment. The development of bonding strength of modified birch veneers glued with hot curing phenol formaldehyde (PF) adhesive was investigated in different pressing (20 s , 160s) and open assembly times (20s , 10 min). Generally, the bonding strength improved by extending the pressing time. In 20 s pressing, increasing assembly time did not change the bonding strength in most of the cases while at 160 s pressing, prolongation of assembly time developed a better bonding for controls, NMM modified and thermally treated veneers at 180°C. The combination of 10 min assembly time and 160 s pressing time provided the highest bonding strength for controls, NMM modified and thermally treated veneers at 180°C while furfurylated samples achieved the highest values in 20 s assembly and 160 s pressing times. In general, modification affected negatively the bonding performance of the veneers, especially for furfurylated and NMM modified samples. In General, the overall results obtained in this thesis showed that modified wood has lower bonding ability and performance than unmodified wood as result of the decreased water related properties, less penetration of adhesive into wood structure and decreased bonding strength after modification. However, the increased dimensional stability and low water uptake of modified wood might lead to better performance in long term.
Author: Mohamed Naceur Belgacem
Publisher: John Wiley & Sons
ISBN: 1118773551
Category : Technology & Engineering
Languages : en
Pages : 1289
Get Book Here
Book Description
This book will focus on lignocellulosic fibres as a raw material for several applications. It will start with wood chemistry and morphology. Then, some fibre isolation processes will be given, before moving to composites, panel and paper manufacturing, characterization and aging.
Author: Rastislav Lagaňa
Publisher: Arbora Publishers
ISBN: 8096886851
Category : Wood
Languages : en
Pages : 234
Get Book Here
Book Description
Author: Dennis Jones
Publisher: Woodhead Publishing
ISBN: 0081009925
Category : Technology & Engineering
Languages : en
Pages : 652
Get Book Here
Book Description
Performance of Bio-based Building Materials provides guidance on the use of bio-based building materials (BBBM) with respect to their performance. The book focuses on BBBM currently present on the European market. The state-of-the-art is presented regarding material properties, recommended uses, performance expectancies, testing methodology, and related standards. Chapters cover both 'old and traditional' BBBM since quite a few of them are experiencing a comeback on the market. Promising developments that could become commercial in the near future are presented as well. The book will be a valuable reference resource for those working in the bio-based materials research community, architects and agencies dealing with sustainable construction, and graduate students in civil engineering. - Takes a unique approach to bio-based materials and presents a broad overview of the topics on relevant areas necessary for application and promotion in construction - Contains a general description, notable properties related to performance, and applications - Presents standards that are structured according to performance types
Author: Patricia Gascón-Garrido
Publisher: Cuvillier Verlag
ISBN: 3736986211
Category : Science
Languages : en
Pages : 141
Get Book Here
Book Description
Plasma treatment is a novel and promising technolgy in the field of wood surface modification. Deposition of micro-particles on wood surfaces by means of plasma is an interesting approach to enhance wood properties and thus, to extend the service life of wood products. On the other hand, several silicone fomulations have been already shown to cause excellent water repellence and interaction with cell wall components, beside to impart high chenical and weathering stability as well as biological resistance in treated wood. Based on that, this study focussed on both treatments seperately in an initial stage of the research; followed by the combination, in a two-step treatment, of vacuum-pressure impregnation of solid wook with siloxanes and additional copper deposition on wood surface using atmostpheric pressure plasma.
