Vibration Analysis of Gas Turbine Rotors PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Vibration Analysis of Gas Turbine Rotors PDF full book. Access full book title Vibration Analysis of Gas Turbine Rotors by Srinivasa Rao Dokku. Download full books in PDF and EPUB format.
Author: Srinivasa Rao Dokku
Publisher: GRIN Verlag
ISBN: 3668803234
Category : Technology & Engineering
Languages : en
Pages : 61
Get Book
Book Description
Master's Thesis from the year 2016 in the subject Engineering - Mechanical Engineering, , language: English, abstract: The purpose of this report is to determine the lateral and torsional dynamic characteristics of the complete system under synchronous conditions of excitation and response. A damped natural response study was made in order to investigate the combined effect of oil film stiffness and damping coefficients on system damping and stability characteristics at all damped natural resonance speeds. An unbalance response analysis is also performed to study the system sensitivity. This study was performed to investigate the lateral vibration characteristics of the subject system in order to avoid vibration problems that might interfere with the smooth and reliable operation of the system. Total system studies are important in that often the coupling effects of marrying driver and driven equipment result in resonant speeds that are not calculable when investigating the response of the separate components. Oil film stiffness and damping for all bearings must be properly considered in the system calculations along with the effective stiffness and damping of pedestal supports as required. The above effects are in the following calculation to ensure the proper calculation of resonant speeds.The following study concerns itself with the lateral analysis of gas turbine, load coupling, and 50 Hz/15.75Kva generator. This study reports the lateral natural frequencies and mode shapes calculated from the mass and stiffness distribution of the beam elements modeled using the DYROBES software. An unbalanced response analysis is also performed to study the system sensitivity. The significance of torsional vibration in high speed rotating machinery is well established. It is desirable to keep all torsional natural frequencies away from operating speed as well as twice the electrical frequency of the system. However, this is not always feasible and, therefore torsional criticals can be tolerated within these regions provided the response to excitation levels are low enough to keep the alternating shear stress within acceptable levels The following study concerns itself with the complete torsional analysis of gas turbine rotor including load coupling, gear box and 50Hz/15.75KVA generator rotor. This study reports the torsional natural frequencies, mode shapes and Campbell diagram by using transfer matrix method. The transient response shear stresses were also calculated for fault condition.
Author: Srinivasa Rao Dokku
Publisher: GRIN Verlag
ISBN: 3668803234
Category : Technology & Engineering
Languages : en
Pages : 61
Get Book
Book Description
Master's Thesis from the year 2016 in the subject Engineering - Mechanical Engineering, , language: English, abstract: The purpose of this report is to determine the lateral and torsional dynamic characteristics of the complete system under synchronous conditions of excitation and response. A damped natural response study was made in order to investigate the combined effect of oil film stiffness and damping coefficients on system damping and stability characteristics at all damped natural resonance speeds. An unbalance response analysis is also performed to study the system sensitivity. This study was performed to investigate the lateral vibration characteristics of the subject system in order to avoid vibration problems that might interfere with the smooth and reliable operation of the system. Total system studies are important in that often the coupling effects of marrying driver and driven equipment result in resonant speeds that are not calculable when investigating the response of the separate components. Oil film stiffness and damping for all bearings must be properly considered in the system calculations along with the effective stiffness and damping of pedestal supports as required. The above effects are in the following calculation to ensure the proper calculation of resonant speeds.The following study concerns itself with the lateral analysis of gas turbine, load coupling, and 50 Hz/15.75Kva generator. This study reports the lateral natural frequencies and mode shapes calculated from the mass and stiffness distribution of the beam elements modeled using the DYROBES software. An unbalanced response analysis is also performed to study the system sensitivity. The significance of torsional vibration in high speed rotating machinery is well established. It is desirable to keep all torsional natural frequencies away from operating speed as well as twice the electrical frequency of the system. However, this is not always feasible and, therefore torsional criticals can be tolerated within these regions provided the response to excitation levels are low enough to keep the alternating shear stress within acceptable levels The following study concerns itself with the complete torsional analysis of gas turbine rotor including load coupling, gear box and 50Hz/15.75KVA generator rotor. This study reports the torsional natural frequencies, mode shapes and Campbell diagram by using transfer matrix method. The transient response shear stresses were also calculated for fault condition.
Author: J. S. Rao
Publisher: New Age International
ISBN: 9788122403046
Category : Technology & Engineering
Languages : en
Pages : 466
Get Book
Book Description
Fatigue Failures Of Blades Is One Of The Most Vexing Problems Of Turbomachine Manufacturers, Ever Since The Steam Turbine Became The Main Stay For Power Generating Equipment And Gas Turbines Are Increasingly Used In The Air Transport. The Problem Is Very Complex, Involving The Excitation Due To Aerodynamic Stage Interaction; Damping Due To Material Deformation, Friction At Slip Surfaces And Aerodynamic Damping; Vibration Of An Asymmetric Aerofoil Tapered Along Its Length And Mounted On A Rotating Disc At A Stagger Angle. The Problem Is Also Governed By Heat Transfer Analysis And Thermal Stresses.His Book Deals With A Basic Understanding Of Free Vibratory Behaviour Of Turbine Blades- Free Standing, Packetted, And Bladed-Discs. The Analysis Is Based On Continuous And Discrete Models Using Energy Principles And Finite Element Techniques. A Clear Understanding Of The Interference Phenomenon In A Thin Cambered Airfoil Stage In Subsonic Flow Is Presented To Determine The Nonsteady Excitation Forces Acting On The Blades. A Comprehensive Treatment On The Blade Damping Phenomenon That Occurs In Turbines Is Given. The Nonlinear Damping Models Account For Material Damping And Friction Damping As A Function Of Rotational Speed For Each Mode. Resonant Response Calculation Procedures For The Steadily Running As Well As Accelerating Blades Are Given.Cumulative Damage Calculations Are Then Outlined For Fatigue Life Estimation Of Turbomachine Blades. The Book Also Deals With Heat Transfer Analysis And Thermal Stress Calculations Which Help In A Comprehensive Understanding Of The Blade Problems.
Author: Sang Heon Song
Publisher:
ISBN:
Category :
Languages : en
Pages : 262
Get Book
Book Description
Author: Maurice L. Adams
Publisher: CRC Press
ISBN: 0824745418
Category : Technology & Engineering
Languages : en
Pages : 376
Get Book
Book Description
This comprehensivereference/text provides a thorough grounding in the fundamentals of rotating machinery vibration-treating computer model building, sources and types of vibration, and machine vibration signal analysis. Illustrating turbomachinery, vibration severity levels, condition monitoring, and rotor vibration cause identification, Rotating Machinery Vibration Provides a primer on vibration fundamentals Highlights calculation of rotor unbalance response and rotor self-excited vibration Demonstrates calculation of rotor balancing weights Furnishes PC codes for lateral rotor vibration analyses Treats bearing, seal, impeller, and blade effects on rotor vibration Describes modes, excitation, and stability of computer models Includes extensive PC data coefficient files on bearing dynamics Providing comprehensive descriptions of vibration symptoms for rotor unbalance, dynamic instability, rotor-stator rubs, misalignment, loose parts, cracked shafts, and rub-induced thermal bows, Rotating Machinery Vibration is an essential reference for mechanical, chemical, design, manufacturing, materials, aerospace, and reliability engineers; and specialists in vibration, rotating machinery, and turbomachinery; and an ideal text for upper-level undergraduate and graduate students in these disciplines.
Author: Singiresu S. Rao
Publisher: John Wiley & Sons
ISBN: 1119424143
Category : Technology & Engineering
Languages : en
Pages : 816
Get Book
Book Description
A revised and up-to-date guide to advanced vibration analysis written by a noted expert The revised and updated second edition of Vibration of Continuous Systems offers a guide to all aspects of vibration of continuous systems including: derivation of equations of motion, exact and approximate solutions and computational aspects. The author—a noted expert in the field—reviews all possible types of continuous structural members and systems including strings, shafts, beams, membranes, plates, shells, three-dimensional bodies, and composite structural members. Designed to be a useful aid in the understanding of the vibration of continuous systems, the book contains exact analytical solutions, approximate analytical solutions, and numerical solutions. All the methods are presented in clear and simple terms and the second edition offers a more detailed explanation of the fundamentals and basic concepts. Vibration of Continuous Systems revised second edition: Contains new chapters on Vibration of three-dimensional solid bodies; Vibration of composite structures; and Numerical solution using the finite element method Reviews the fundamental concepts in clear and concise language Includes newly formatted content that is streamlined for effectiveness Offers many new illustrative examples and problems Presents answers to selected problems Written for professors, students of mechanics of vibration courses, and researchers, the revised second edition of Vibration of Continuous Systems offers an authoritative guide filled with illustrative examples of the theory, computational details, and applications of vibration of continuous systems.
Author: Gullapalli Sivaramakrishna
Publisher: Springer Nature
ISBN: 9811923787
Category : Technology & Engineering
Languages : en
Pages : 633
Get Book
Book Description
This book presents the select proceedings of the 3rd National Aerospace Propulsion Conference (NAPC 2020). It discusses the recent trends in the area of aerospace propulsion technologies covering both air-breathing and non-air-breathing propulsion. The topics covered include state-of-the-art design, analysis and developmental testing of gas turbine engine modules and sub-systems like compressor, combustor, turbine and alternator; advances in spray injection and atomization; aspects of combustion pertinent to all types of propulsion systems and nuances of space, missile and alternative propulsion systems. The book will be a valuable reference for beginners, researchers and professionals interested in aerospace propulsion and allied fields.
Author: Alok Sinha
Publisher:
ISBN: 9781108104951
Category : TECHNOLOGY & ENGINEERING
Languages : en
Pages :
Get Book
Book Description
This is the first comprehensive volume on fundamental concepts and issues in the analysis of mistuned vibrations.
Author: Murari P. Singh
Publisher: McGraw Hill Professional
ISBN: 0071635734
Category : Technology & Engineering
Languages : en
Pages : 384
Get Book
Book Description
THE LATEST STEAM TURBINE BLADE DESIGN AND ANALYTICAL TECHNIQUES Blade Design and Analysis for Steam Turbines provides a concise reference for practicing engineers involved in the design, specification, and evaluation of industrial steam turbines, particularly critical process compressor drivers. A unified view of blade design concepts and techniques is presented. The book covers advances in modal analysis, fatigue and creep analysis, and aerodynamic theories, along with an overview of commonly used materials and manufacturing processes. This authoritative guide will aid in the design of powerful, efficient, and reliable turbines. COVERAGE INCLUDES: Performance fundamentals and blade loading determination Turbine blade construction, materials, and manufacture System of stress and damage mechanisms Fundamentals of vibration Damping concepts applicable to turbine blades Bladed disk systems Reliability evaluation for blade design Blade life assessment aspects Estimation of risk
Author: Tahar Fakhfakh
Publisher: Springer
ISBN: 3319414593
Category : Technology & Engineering
Languages : en
Pages : 329
Get Book
Book Description
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at International Conference on Acoustics and Vibration (ICAV2016), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held March 21-23, in Hammamet, Tunisia. The contributions, mainly written by north African authors, covers advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others.This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.
Author:
Publisher:
ISBN:
Category : Shock (Mechanics)
Languages : en
Pages : 594
Get Book
Book Description
