Validation of a Standardized Measuring Journal for Calibration of Exhaust Gas After Treatment Catalysts - Investigation of the Effect of Hydrocarbon Species on SCR Catalyst Behaviour PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Validation of a Standardized Measuring Journal for Calibration of Exhaust Gas After Treatment Catalysts - Investigation of the Effect of Hydrocarbon Species on SCR Catalyst Behaviour PDF full book. Access full book title Validation of a Standardized Measuring Journal for Calibration of Exhaust Gas After Treatment Catalysts - Investigation of the Effect of Hydrocarbon Species on SCR Catalyst Behaviour by Juan Miralles Munita. Download full books in PDF and EPUB format.
Author: Juan Miralles Munita
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
In Research & Development, the simulation of the aftertreatment systems has become a fundamental part in the development process for the automobile industry. It is normal then to study individually every aftertreatment technology in order to create simulation models for these technologies such as Selective Catalytic Reduction (SCR), Diesel Oxidation Catalyst (DOC) or Diesel Particle Filter (DPF). For helping the creation of these models, dedicated experiments are carried out. These kinetic experiments must be designed and well-defined such that they provide the necessary information in a reproducible way at minimal time and costs. In the first part of the work and in order to facilitate measurements with long SDPF specimens, a reactor with a new oven design has been characterized. Its thermal behaviour and the absence of unwanted reactions of the bare reactor (without catalyst) have been checked. In a previous work, dedicated kinetic measurement procedures for the SCR calibration process were determined and optimized on a synthetic gas test rig. The optimal settings and procedures were programed in the test rig control software. In the second part of this work, several measurements based on these optimal procedures have been carried out on the test rig with a state-of-the-art Cu-Ze SCR to investigate the influence of several types of HCs on the SCR behaviour. The alternative of the NO2/NOx ratio step concept was used for the NOx conversion study of the SCR catalyst. It has been seen that the presence during the experiment of different HC species such as C3H6 and C2H2 had an negative effect in the NOx reduction, and for other HC species as C3H8 the effect was practically inexistent. The results of this work will help to better understand the behaviour of SCR catalysts and SDPF filters for future investigations.
Author: Juan Miralles Munita
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
In Research & Development, the simulation of the aftertreatment systems has become a fundamental part in the development process for the automobile industry. It is normal then to study individually every aftertreatment technology in order to create simulation models for these technologies such as Selective Catalytic Reduction (SCR), Diesel Oxidation Catalyst (DOC) or Diesel Particle Filter (DPF). For helping the creation of these models, dedicated experiments are carried out. These kinetic experiments must be designed and well-defined such that they provide the necessary information in a reproducible way at minimal time and costs. In the first part of the work and in order to facilitate measurements with long SDPF specimens, a reactor with a new oven design has been characterized. Its thermal behaviour and the absence of unwanted reactions of the bare reactor (without catalyst) have been checked. In a previous work, dedicated kinetic measurement procedures for the SCR calibration process were determined and optimized on a synthetic gas test rig. The optimal settings and procedures were programed in the test rig control software. In the second part of this work, several measurements based on these optimal procedures have been carried out on the test rig with a state-of-the-art Cu-Ze SCR to investigate the influence of several types of HCs on the SCR behaviour. The alternative of the NO2/NOx ratio step concept was used for the NOx conversion study of the SCR catalyst. It has been seen that the presence during the experiment of different HC species such as C3H6 and C2H2 had an negative effect in the NOx reduction, and for other HC species as C3H8 the effect was practically inexistent. The results of this work will help to better understand the behaviour of SCR catalysts and SDPF filters for future investigations.
Author: Isabella Nova
Publisher: Springer Science & Business Media
ISBN: 1489980717
Category : Science
Languages : en
Pages : 715
Get Book Here
Book Description
Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.
Author: Lino Guzzella
Publisher: Springer Science & Business Media
ISBN: 3662080036
Category : Technology & Engineering
Languages : en
Pages : 303
Get Book Here
Book Description
Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.
Author: National Research Council
Publisher: National Academies Press
ISBN: 0309122082
Category : Transportation
Languages : en
Pages : 130
Get Book Here
Book Description
The 21st Century Truck Partnership (21CTP), a cooperative research and development partnership formed by four federal agencies with 15 industrial partners, was launched in the year 2000 with high hopes that it would dramatically advance the technologies used in trucks and buses, yielding a cleaner, safer, more efficient generation of vehicles. Review of the 21st Century Truck Partnership critically examines and comments on the overall adequacy and balance of the 21CTP. The book reviews how well the program has accomplished its goals, evaluates progress in the program, and makes recommendations to improve the likelihood of the Partnership meeting its goals. Key recommendations of the book include that the 21CTP should be continued, but the future program should be revised and better balanced. A clearer goal setting strategy should be developed, and the goals should be clearly stated in measurable engineering terms and reviewed periodically so as to be based on the available funds.
Author: National Research Council
Publisher: National Academies Press
ISBN: 0309216389
Category : Science
Languages : en
Pages : 373
Get Book Here
Book Description
Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Author:
Publisher:
ISBN:
Category : Polycyclic aromatic hydrocarbons
Languages : en
Pages : 500
Get Book Here
Book Description
Author: Oliver Kröcher
Publisher: MDPI
ISBN: 3038973645
Category : Science
Languages : en
Pages : 281
Get Book Here
Book Description
This book is a printed edition of the Special Issue "Selective Catalytic Reduction of NO
x" that was published in Catalysts
Author: Paul Richards
Publisher: SAE International
ISBN: 0768006384
Category : Technology & Engineering
Languages : en
Pages : 870
Get Book Here
Book Description
The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
Author: Havard Devold
Publisher: Lulu.com
ISBN: 1105538648
Category : Gas fields
Languages : en
Pages : 84
Get Book Here
Book Description
Author: National Research Council
Publisher: National Academies Press
ISBN: 0309373913
Category : Science
Languages : en
Pages : 812
Get Book Here
Book Description
The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
