Ultrasonic Nondestructive Testing of Inhomogeneous Isotropic and Anisotropic Media: Modeling and Imaging PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Ultrasonic Nondestructive Testing of Inhomogeneous Isotropic and Anisotropic Media: Modeling and Imaging PDF full book. Access full book title Ultrasonic Nondestructive Testing of Inhomogeneous Isotropic and Anisotropic Media: Modeling and Imaging by Chinta, Prashanth Kumar. Download full books in PDF and EPUB format.
Author: Chinta, Prashanth Kumar
Publisher: kassel university press GmbH
ISBN: 386219616X
Category : Ultrasonic testing
Languages : en
Pages : 173
Get Book Here
Book Description
This thesis discusses ultrasonic testing by means of numerical modeling and image reconstruction techniques using elastic and acoustic wave fields. Numerical modeling of elastic waves (part one of the thesis) is used to understand the elastic wave scattering due to material defects and the propagation of surface waves in inhomogeneous isotropic and anisotropic media, with special emphasis on transversely isotropic and orthotropic media. Different imaging techniques (part two of the thesis) are investigated to develop a software, implemented in Matlab, which can give imaging results immediately after the measurement almost in real time as it can read and process the data obtained directly from the measurement. Acoustic wave scattering using analytical techniques and imaging techniques based on Radon transform are investigated. The data obtained from the Radon transform are subjected for imaging utilizing the filtered back projection algorithm and the Fourier slice theorem. The fundamentals of elastic wave propagation in solids are extensively elaborated. The point source synthesis to compute the Green’s functions for anisotropic media and the plane wave synthesis to compute slowness, phase and group velocity surfaces are studied. The elastic integral equations for the so called stretched coordinate system are derived. Based on these equations the numerical tool ’Three-dimensional Elastodynamic Finite Integration Technique’ (3D-EFIT) has been enhanced to treat not only isotropic media but also anisotropic media. For fast computation, the 3D-EFIT code using the Message Passing Interface (MPI) is used by which processing on massive parallel computers is made possible. In 3D-EFIT the Convolutional Perfectly Matched Layers (CPML) can also be applied to absorb the elastic body waves as well as the surface and evanescent waves. 3D-EFIT for homogeneous anisotropic media is validated by comparing computed Green’s functions with an analytical solution. After the validation, the applications of EFIT such as elastic wave modeling in inhomogeneous austenitic steel welds and inhomogeneous orthotropic wooden structures are presented. The results of the 2D-EFIT and 3D-EFIT modeling are compared against measurements performed at Federal Institute for Materials Research and Testing (BAM). After the modeling part of the thesis, inverse scattering techniques for fast imaging of inhomogeneities are studied. For three-dimensional imaging of defects in concrete, the Synthetic Aperture and Focusing Technique (SAFT) and Fourier Transformed Synthetic aperture Focusing Technique (FT-SAFT) are applied to data measured using a transducer array. The seismic Dip-Moveout (DMO) method has been utilized to convert measured bistatic data into monostatic data. A special treatment of SAFT as a technique for back propagation of the wave fields using time reversal, utilizing the knowledge of the geometry, is presented. Finally, time domain anisotropic SAFT (AnSAFT) is studied for image reconstruction of defects in inhomogeneous geometry with orthotropic crystal structure of the embedding medium.
Author: Chinta, Prashanth Kumar
Publisher: kassel university press GmbH
ISBN: 386219616X
Category : Ultrasonic testing
Languages : en
Pages : 173
Get Book Here
Book Description
This thesis discusses ultrasonic testing by means of numerical modeling and image reconstruction techniques using elastic and acoustic wave fields. Numerical modeling of elastic waves (part one of the thesis) is used to understand the elastic wave scattering due to material defects and the propagation of surface waves in inhomogeneous isotropic and anisotropic media, with special emphasis on transversely isotropic and orthotropic media. Different imaging techniques (part two of the thesis) are investigated to develop a software, implemented in Matlab, which can give imaging results immediately after the measurement almost in real time as it can read and process the data obtained directly from the measurement. Acoustic wave scattering using analytical techniques and imaging techniques based on Radon transform are investigated. The data obtained from the Radon transform are subjected for imaging utilizing the filtered back projection algorithm and the Fourier slice theorem. The fundamentals of elastic wave propagation in solids are extensively elaborated. The point source synthesis to compute the Green’s functions for anisotropic media and the plane wave synthesis to compute slowness, phase and group velocity surfaces are studied. The elastic integral equations for the so called stretched coordinate system are derived. Based on these equations the numerical tool ’Three-dimensional Elastodynamic Finite Integration Technique’ (3D-EFIT) has been enhanced to treat not only isotropic media but also anisotropic media. For fast computation, the 3D-EFIT code using the Message Passing Interface (MPI) is used by which processing on massive parallel computers is made possible. In 3D-EFIT the Convolutional Perfectly Matched Layers (CPML) can also be applied to absorb the elastic body waves as well as the surface and evanescent waves. 3D-EFIT for homogeneous anisotropic media is validated by comparing computed Green’s functions with an analytical solution. After the validation, the applications of EFIT such as elastic wave modeling in inhomogeneous austenitic steel welds and inhomogeneous orthotropic wooden structures are presented. The results of the 2D-EFIT and 3D-EFIT modeling are compared against measurements performed at Federal Institute for Materials Research and Testing (BAM). After the modeling part of the thesis, inverse scattering techniques for fast imaging of inhomogeneities are studied. For three-dimensional imaging of defects in concrete, the Synthetic Aperture and Focusing Technique (SAFT) and Fourier Transformed Synthetic aperture Focusing Technique (FT-SAFT) are applied to data measured using a transducer array. The seismic Dip-Moveout (DMO) method has been utilized to convert measured bistatic data into monostatic data. A special treatment of SAFT as a technique for back propagation of the wave fields using time reversal, utilizing the knowledge of the geometry, is presented. Finally, time domain anisotropic SAFT (AnSAFT) is studied for image reconstruction of defects in inhomogeneous geometry with orthotropic crystal structure of the embedding medium.
Author: L. Masotti
Publisher: Springer Science & Business Media
ISBN: 144198772X
Category : Science
Languages : en
Pages : 834
Get Book Here
Book Description
This volume contains 131 of the papers presented at the 22nd International Symposium on Acoustical Imaging. This meeting, which was held for the first time in Florence, Italy, on September 3-6, 1995, allowed an intense and friendly exchange of ideas between over 150 researchers from 26 different countries of Europe (70%), America (20%), Asia and Australia (10%). The Symposium started on Sunday, September 3, with the opening Session held in the magnificent 'Salone dei 500' in Palazzo Vecchio; this included invited talks by Peter WeHs and Hua Lee, who reviewed the State of the Art in Acoustical Imaging research. One hundred and forty papers, selected from the nearly 200 submitted Abstracts, were presented in 11 non-parallel oral Sessions and one Poster Session. This year a 'Best Poster' award was introduced, which was won by V. Miette, M. Fink and F. Wu. Also, a special session on Acoustical Microscopy was organized by Walter Arnold, in which invited speakers Ioie Iones, Oleg Kolosov, Andrew Briggs and Ute Rabe reviewed the capabilities of this em erging topic.
Author: Fu-Kuo Chang
Publisher: DEStech Publications, Inc
ISBN: 1605951153
Category : Technology & Engineering
Languages : en
Pages : 1434
Get Book Here
Book Description
Original research on SHM sensors, quantification strategies, system integration and control for a wide range of engineered materials New applications in robotics, machinery, as well as military aircraft, railroads, highways, bridges, pipelines, stadiums, tunnels, space exploration and energy production Continuing a critical book series on structural health monitoring (SHM), this two-volume set (with full-text searchable CD-ROM) offers, as its subtitle implies, a guide to greater integration and control of SHM systems. Specifically, the volumes contain new research that will enable readers to more efficiently link sensor detection, diagnostics/quantification, overall system functionality, and automated, e.g., robotic, control, thus further closing the loop from inherent signal-based damage detection to responsive real-time maintenance and repair. SHM performance is demonstrated in monitoring the behavior of composites, metals, concrete, polymers and selected nanomaterials in a wide array of surroundings, including harsh environments, under extreme (e.g., seismic) loading and in space. New information on smart sensors and network optimization is enhanced by novel statistical and model-based methods for signal processing and data quantification. A special feature of the book is its explanation of emerging control technologies. Research in these volumes was initially presented in September 2013 at the 9th International Workshop on Structural Health Monitoring (IWSHM), held at Stanford University and sponsored by the Air Force Office of Scientific Research, the Army Research Laboratory, and the Office of Naval Research.
Author: W. Ross Stone
Publisher: John Wiley & Sons
ISBN: 9780471268666
Category : Science
Languages : en
Pages : 1028
Get Book Here
Book Description
A triennial summation of the state of the art in radio science This book is the fourth in the modern series of triennial reviews prepared by the International Union of Radio Science to further communication and understanding of the status and future of radio science, both for those working in the field, and for those who want to know what is of current importance in this area. The International Union of Radio Science, URSI (Union Radio-Scientifique Internationale), has divided the subject of "Radio Science" according to the ten topics of the Scientific Commissions that make up URSI. This volume consists of thirty-eight original, peer-reviewed papers. Each paper provides a critical, in-depth review of–and, in many cases, tutorial on–advances and research that have been of significant importance within the area of interest of the Commissions during the past three to four years. Among the topics covered are: Electromagnetic metrology Fields and waves Signals and systems Electronics and photonics Electromagnetic noise and interference Wave propagation and remote sensing Ionospheric radio and propagation Waves in plasmas Radio astronomy Electromagnetics in biology and medicine With an included CD-ROM of the full book text, allowing the user to do full-text searching of all the papers, the Review of Radio Science: 1999—2002 is a resource of vital importance to anyone working in, or with an interest in, radio science.
Author: E. R. Pike
Publisher: Academic Press
ISBN: 0126137609
Category : Science
Languages : en
Pages : 985
Get Book Here
Book Description
Part 1: SCATTERING OF WAVES BY MACROSCOPIC TARGET -- Interdisciplinary aspects of wave scattering -- Acoustic scattering -- Acoustic scattering: approximate methods -- Electromagnetic wave scattering: theory -- Electromagnetic wave scattering: approximate and numerical methods -- Electromagnetic wave scattering: applications -- Elastodynamic wave scattering: theory -- Elastodynamic wave scattering: Applications -- Scattering in Oceans -- Part 2: SCATTERING IN MICROSCOPIC PHYSICS AND CHEMICAL PHYSICS -- Introduction to direct potential scattering -- Introduction to Inverse Potential Scattering -- Visible and Near-visible Light Scattering -- Practical Aspects of Visible and Near-visible Light Scattering -- Nonlinear Light Scattering -- Atomic and Molecular Scattering: Introduction to Scattering in Chemical -- X-ray Scattering -- Neutron Scattering -- Electron Diffraction and Scattering -- Part 3: SCATTERING IN NUCLEAR PHYSICS -- Nuclear Physics -- Part 4: PARTICLE SCATTERING -- State of the Art of Peturbative Methods -- Scattering Through Electro-weak Interactions (the Fermi Scale) -- Scattering Through Strong Interactions (the Hadronic or QCD Scale) -- Part 5: SCATTERING AT EXTREME PHYSICAL SCALES -- Scattering at Extreme Physical Scales -- Part 6: SCATTERING IN MATHEMATICS AND NON-PHYSICAL SCIENCES -- Relations with Other Mathematical Theories -- Inverse Scattering Transform and Non-linear Partial Differenttial Equations -- Scattering of Mathematical Objects.
Author: Alain Leger
Publisher: Springer Science & Business Media
ISBN: 3540891056
Category : Technology & Engineering
Languages : en
Pages : 427
Get Book Here
Book Description
Non Destructive Testing and Non Destructive Evaluation using Ultrasounds covers an important field of applications and requires a wide range of fundamental theoretical, numerical and experimental investigations. In the present volume, the reader will find some relevant research results on wave propagation in complex materials and structures which are concerned with today’s problems on composites, bonding, guided waves, contact or damage, imaging and structural noise. The fifth meeting of the Anglo-French Research Group on "Wave propagation in non homogeneous media with a view to Non Destructive testing" was held in Anglet, France, June 2-6, 2008.
Author: Christopher Lane
Publisher: Springer Science & Business Media
ISBN: 3319025171
Category : Technology & Engineering
Languages : en
Pages : 141
Get Book Here
Book Description
This thesis describes the development of a new technique to solve an important industrial inspection requirement for a high-value jet-engine component. The work – and the story told in the thesis – stretches all the way from the fundamentals of wave propagation in anisotropic material and ultrasonic array imaging through to device production and site trials. The book includes a description of a new method to determine crystallographic orientation from 2D ultrasonic array data. Another new method is described that enables volumetric images of an anisotropic material to be generated from 2D ultrasonic array data, based on measured crystallographic orientation. After extensive modeling, a suitable 2D array and deployment fixtures were manufactured and tested on in situ turbine blades in real engines. The final site trial indicated an order of magnitude improvement over the best existing technique in the detectability of a certain type of root cracking. The Development of a 2D Ultrasonic Array Inspection for Single Crystal Turbine Blades should be an inspiration for those starting out on doctoral degrees as it shows the complete development cycle from basic science to industrial usage.
Author: Oral Büyüköztürk
Publisher: Springer Science & Business Media
ISBN: 9400707223
Category : Technology & Engineering
Languages : en
Pages : 1231
Get Book Here
Book Description
Condition assessment and characterization of materials and structures by means of nondestructive testing (NDT) methods is a priority need around the world to meet the challenges associated with the durability, maintenance, rehabilitation, retrofitting, renewal and health monitoring of new and existing infrastructures including historic monuments. Numerous NDT methods that make use of certain components of the electromagnetic and acoustic spectrum are currently in use to this effect with various levels of success and there is an intensive worldwide research effort aimed at improving the existing methods and developing new ones. The knowledge and information compiled in this book captures the current state of the art in NDT methods and their application to civil and other engineering materials and structures. Critical reviews and advanced interdisciplinary discussions by world-renowned researchers point to the capabilities and limitations of the currently used NDT methods and shed light on current and future research directions to overcome the challenges in their development and practical use. In this respect, the contents of this book will equally benefit practicing engineers and researchers who take part in characterization, assessment and health monitoring of materials and structures.
Author: Sourav Banerjee
Publisher: CRC Press
ISBN: 0429853122
Category : Science
Languages : en
Pages : 574
Get Book Here
Book Description
Introducing computational wave propagation methods developed over 40 years of research, this comprehensive book offers a computational approach to NDE of isotropic, anisotropic, and functionally graded materials. It discusses recent methods to enable enhanced computational efficiency for anisotropic materials. It offers an overview of the need for and uses of NDE simulation. The content provides a basic understanding of ultrasonic wave propagation through continuum mechanics and detailed discussions on the mathematical techniques of six computational methods to simulate NDE experiments. In this book, the pros and cons of each individual method are discussed and guidelines for selecting specific simulation methods for specific NDE scenarios are offered. Covers ultrasonic CNDE fundamentals to provide understanding of NDE simulation methods Offers a catalog of effective CNDE methods to evaluate and compare Provides exercises on real-life NDE problems with mathematical steps Discusses CNDE for common material types, including isotropic, anisotropic, and functionally graded materials Presents readers with practical knowledge on ultrasonic CNDE methods This work is an invaluable resource for researchers, advanced students, and industry professionals across materials, mechanical, civil, and aerospace engineering, and anyone seeking to enhance their understanding of computational approaches for advanced material evaluation methods.
Author: Karl-Jörg Langenberg
Publisher: CRC Press
ISBN: 1439855900
Category : Science
Languages : en
Pages : 756
Get Book Here
Book Description
This book features a comprehensive discussion of the mathematical foundations of ultrasonic nondestructive testing of materials. The authors include a brief description of the theory of acoustic and electromagnetic fields to underline the similarities and differences with respect to elastodynamics. They also cover vector, elastic plane, and Rayleigh surface waves as well as ultrasonic beams, inverse scattering, and ultrasonic nondestructive imaging. A coordinate-free notation system is used that is easier to understand and navigate than standard index notation.
