Thermal Hydraulic Limits Analysis for the Massachusetts Institute of Technology Research Reactor Low Enrichment Uranium Core Conversion Using Statistical Propagation of Parametric Uncertainties PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Thermal Hydraulic Limits Analysis for the Massachusetts Institute of Technology Research Reactor Low Enrichment Uranium Core Conversion Using Statistical Propagation of Parametric Uncertainties PDF full book. Access full book title Thermal Hydraulic Limits Analysis for the Massachusetts Institute of Technology Research Reactor Low Enrichment Uranium Core Conversion Using Statistical Propagation of Parametric Uncertainties by Keng-Yen Chiang. Download full books in PDF and EPUB format.
Author: Keng-Yen Chiang
Publisher:
ISBN:
Category :
Languages : en
Pages : 171
Get Book Here
Book Description
The MIT Research Reactor (MITR) is evaluating the conversion from highly enriched uranium (HEU) to low enrichment uranium (LEU) fuel. In addition to the fuel element re-design from 15 to 18 plates per element, a reactor power upgraded from 6 MW to 7 MW is proposed in order to maintain the same reactor performance of the HEU core. Previous approaches in analyzing the impact of engineering uncertainties on thermal hydraulic limits via the use of engineering hot channel factors (EHCFs) were unable to explicitly quantify the uncertainty and confidence level in reactor parameters. The objective of this study is to develop a methodology for MITR thermal hydraulic limits analysis by statistically combining engineering uncertainties in order to eliminate unnecessary conservatism inherent in traditional analyses. This methodology was employed to analyze the Limiting Safety System Settings (LSSS) for the MITR LEU core, based on the criterion of onset of nucleate boiling (ONB). Key parameters, such as coolant channel tolerances and heat transfer coefficients, were considered as normal distributions using Oracle Crystal Ball for the LSSS evaluation. The LSSS power is determined with 99.7% confidence level. The LSSS power calculated using this new methodology is 9.1 MW, based on core outlet coolant temperature of 60 'C, and primary coolant flow rate of 1800 gpm, compared to 8.3 MW obtained from the analytical method using the EHCFs with same operating conditions. The same methodology was also used to calculate the safety limit (SL) to ensure that adequate safety margin exists between LSSS and SL. The criterion used to calculate SL is the onset of flow instability. The calculated SL is 10.6 MW, which is 1.5 MW higher than LSSS, permitting sufficient margin between LSSS and SL.
Author: Keng-Yen Chiang
Publisher:
ISBN:
Category :
Languages : en
Pages : 171
Get Book Here
Book Description
The MIT Research Reactor (MITR) is evaluating the conversion from highly enriched uranium (HEU) to low enrichment uranium (LEU) fuel. In addition to the fuel element re-design from 15 to 18 plates per element, a reactor power upgraded from 6 MW to 7 MW is proposed in order to maintain the same reactor performance of the HEU core. Previous approaches in analyzing the impact of engineering uncertainties on thermal hydraulic limits via the use of engineering hot channel factors (EHCFs) were unable to explicitly quantify the uncertainty and confidence level in reactor parameters. The objective of this study is to develop a methodology for MITR thermal hydraulic limits analysis by statistically combining engineering uncertainties in order to eliminate unnecessary conservatism inherent in traditional analyses. This methodology was employed to analyze the Limiting Safety System Settings (LSSS) for the MITR LEU core, based on the criterion of onset of nucleate boiling (ONB). Key parameters, such as coolant channel tolerances and heat transfer coefficients, were considered as normal distributions using Oracle Crystal Ball for the LSSS evaluation. The LSSS power is determined with 99.7% confidence level. The LSSS power calculated using this new methodology is 9.1 MW, based on core outlet coolant temperature of 60 'C, and primary coolant flow rate of 1800 gpm, compared to 8.3 MW obtained from the analytical method using the EHCFs with same operating conditions. The same methodology was also used to calculate the safety limit (SL) to ensure that adequate safety margin exists between LSSS and SL. The criterion used to calculate SL is the onset of flow instability. The calculated SL is 10.6 MW, which is 1.5 MW higher than LSSS, permitting sufficient margin between LSSS and SL.
Author: Chengmin Liu
Publisher: Springer Nature
ISBN: 9819910234
Category : Science
Languages : en
Pages : 1179
Get Book Here
Book Description
This is the first in a series of three volumes of proceedings of the 23rd Pacific Basin Nuclear Conference (PBNC 2022) which was held by Chinese Nuclear Society. As one in the most important and influential conference series of nuclear science and technology, the 23rd PBNC was held in Beijing and Chengdu, China in 2022 with the theme “Nuclear Innovation for Zero-carbon Future”. For taking solid steps toward the goals of achieving peak carbon emissions and carbon neutrality, future-oriented nuclear energy should be developed in an innovative way for meeting global energy demands and coordinating the deployment mechanism. It brought together outstanding nuclear scientists and technical experts, senior industry executives, senior government officials and international energy organization leaders from all across the world. The proceedings highlight the latest scientific, technological and industrial advances in Nuclear Safety and Security, Operations and Maintenance, New Builds, Waste Management, Spent Fuel, Decommissioning, Supply Capability and Quality Management, Fuel Cycles, Digital Reactor and New Technology, Innovative Reactors and New Applications, Irradiation Effects, Public Acceptance and Education, Economics, Medical and Biological Applications, and also the student program that intends to raise students’ awareness in fully engaging in this career and keep them updated on the current situation and future trends. These proceedings are not only a good summary of the new developments in the field, but also a useful guideline for the researchers, engineers and graduate students. This is an open access book.
Author: C. Housiadas
Publisher:
ISBN:
Category : Nuclear reactors
Languages : en
Pages : 36
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
A statistical analysis of thermal limits has been carried out for the research reactor (NBSR) at the National Institute of Standards and Technology (NIST). The objective of this analysis was to update the uncertainties of the hot channel factors with respect to previous analysis for both high-enriched uranium (HEU) and low-enriched uranium (LEU) fuels. Although uncertainties in key parameters which enter into the analysis are not yet known for the LEU core, the current analysis uses reasonable approximations instead of conservative estimates based on HEU values. Cumulative distribution functions (CDFs) were obtained for critical heat flux ratio (CHFR), and onset of flow instability ratio (OFIR). As was done previously, the Sudo-Kaminaga correlation was used for CHF and the Saha-Zuber correlation was used for OFI. Results were obtained for probability levels of 90%, 95%, and 99.9%. As an example of the analysis, the results for both the existing reactor with HEU fuel and the LEU core show that CHFR would have to be above 1.39 to assure with 95% probability that there is no CHF. For the OFIR, the results show that the ratio should be above 1.40 to assure with a 95% probability that OFI is not reached.
Author: Bahman Zohuri
Publisher: Springer
ISBN: 3319174347
Category : Science
Languages : en
Pages : 667
Get Book Here
Book Description
This text covers the fundamentals of thermodynamics required to understand electrical power generation systems and the application of these principles to nuclear reactor power plant systems. It is not a traditional general thermodynamics text, per se, but a practical thermodynamics volume intended to explain the fundamentals and apply them to the challenges facing actual nuclear power plants systems, where thermal hydraulics comes to play. Written in a lucid, straight-forward style while retaining scientific rigor, the content is accessible to upper division undergraduate students and aimed at practicing engineers in nuclear power facilities and engineering scientists and technicians in industry, academic research groups, and national laboratories. The book is also a valuable resource for students and faculty in various engineering programs concerned with nuclear reactors. This book also: Provides extensive coverage of thermal hydraulics with thermodynamics in nuclear reactors, beginning with fundamental definitions of units and dimensions, thermodynamic variables, and the Laws of Thermodynamics progressing to sections on specific applications of the Brayton and Rankine cycles for power generation and projected reactor systems design issues Reinforces fundamentals of fluid dynamics and heat transfer; thermal and hydraulic analysis of nuclear reactors, two-phase flow and boiling, compressible flow, stress analysis, and energy conversion methods Includes detailed appendices that cover metric and English system units and conversions, detailed steam and gas tables, heat transfer properties, and nuclear reactor system descriptions
Author: Stuart Ryan Blair
Publisher:
ISBN:
Category :
Languages : en
Pages : 257
Get Book Here
Book Description
A thermal hydraulic analysis of the International Reactor Innovative and Secure (IRIS) core has been performed. Thermal margins for steady state and a selection of Loss Of Flow Accidents have been assessed using three methodologies to account for uncertainty. The thermal hydraulic analysis has shown that the IRIS is designed with adequate thermal margin for steady state operation, the locked rotor/shaft shear accident (LR/SS) and for variants of the partial loss of flow accident. To treat uncertainties, three methods were used, ranging from conservative, deterministic methods, to more realistic and computationally demanding Monte Carlo-based methods. To facilitate the computational requirements of the thermal hydraulic analysis, a script-based interface was created for VIPRE. This scripted interface (written in Matlab) supplants the existing file-based interface. This interface allows for repeated, automatic execution of the VIPRE code on a script-modifiable input data, and parses and stores output data to disk. This endows the analyst with much greater power to use VIPRE in parametric studies, or using the Monte Carlo-based uncertainty analysis methodology. The Matlab environment also provides powerful visualization capability that greatly eases the task of data analysis.
Author: Massachusetts Institute of Technology. Energy Laboratory
Publisher:
ISBN:
Category : Light water reactors
Languages : en
Pages : 472
Get Book Here
Book Description
Author: U.S. Atomic Energy Commission
Publisher:
ISBN:
Category : Radiochemistry
Languages : en
Pages : 216
Get Book Here
Book Description
Author:
Publisher:
ISBN: 9780982800843
Category : Energy policy
Languages : en
Pages : 237
Get Book Here
Book Description
"In this analysis we have presented a method that provides insight into future fuel cycle alternatives by clarifying the complexity of choosing an appropriate fuel cycle in the context of the distribution of burdens and benefits between generations. The current nuclear power deployment practices, together with three future fuel cycles were assessed."--Page 227.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 256
Get Book Here
Book Description
A thermal hydraulic analysis of the International Reactor Innovative and Secure (IRIS) core has been performed. Thermal margins for steady state and a selection of Loss Of Flow Accidents have been assessed using three methodologies to account for uncertainty. The thermal hydraulic analysis has shown that the IRIS is designed with adequate thermal margin for steady state operation, the locked rotor/shaft shear accident (LR/SS) and for variants of the partial loss of flow accident. To treat uncertainties, three methods were used, ranging from conservative, deterministic methods, to more realistic and computationally demanding Monte Carlo-based methods. To facilitate the computational requirements of the thermal hydraulic analysis, a script- based interface was created for VIPRE. This scripted interface (written in Matlab) supplants the existing file-based interface. This interface allows for repeated, automatic execution of the VIPRE code on a script-modifiable input data, and parses and stores output data to disk. This endows the analyst with much greater power to use VIPRE in parametric studies, or using the Monte Carlo-based uncertainty analysis methodology. The Matlab environment also provides powerful visualization capability that greatly eases the task of data analysis.
